- 1976-1977 KZ900
- 1977-1981 KZ1000
-
Out of stock
This is a re-plated part. Genuine Kawasaki ~ Used Kawasaki P/N: 41069-033 Applications: -
Quality re-plated OEM part. Kawasaki P/N: 92004-048 As these have been re-plated, they may not all look the same. Applications:- KZ650
- KZ750
- KZ900
- Z1900
- 77-80 KZ1000
-
Out of stock
Rear Chain Adjuster with Bolt and Nut Genuine Kawasaki Part The chain adjusters have been re-plated, so they will not all look exactly 100% the same. Bolt and nut are new. Kawasaki P/N: 33040-066 Applications:- 1975 Z1 900
- 76-77 KZ900A
- 1980 KZ750 LTD II
- 76-79 KZ750 B (Left hand only)
- 81-82 GPZ 1100
- 82-05 KZ1000 Police
- 81-82 CSR1000
- 77-82 KZ1000 LTD
- 81-83 KZ1000J
- 1980 KZ1000G Classic
- 78 & 80 Z1R
- 77-80 KZ1000A
-
These parts have been re-plated, so they will not all look exactly 100% the same as the one in the photo. Sold as shown with one bolt and two washers. These are the same parts that we use on our restorations. Kit contains the following Kawasaki P/N's (1) 92015-020 Bolt (1) 461F1200 Spring Washer (1) 92022-072 Plain Washer 12mm Applications:- 1969-1975 H1 500
- 1976 KH500
- A1, A1SS
- A7, A7SS
-
Freshly Powder Coated. Nice Genuine Parts. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Contains the following Kawasaki P/N's:- 34011-029 Stand OEM powder coated
- 34023-012 Spring
- 34019-014 Bolt
- 92016-044 Nut
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
As this bolt has been replated, and we have multiple quantities of this item, they will not all look exactly 100% the same as the ones shown in the photo. Kawasaki Genuine Part- Used Replated Kawasaki P/N: 43066-001 (Quantity 3) Quality Reproduction Washer P/N: 43067-001 (Quantity 6) Our P/N: 43066-001 KIT Applications:- H2 750 ALL
- Z1 ALL
- H1 '72 - '75
- KZ1000 '77-'80 All
- KZ1300
- Does Fit MANY Others
-
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41078-008 Kit Includes:- 41062-005 Speedometer Cable Bushing
- 41063-001 Thrust Washer (2)
- 41060-017 Speedometer Pinion
- 41082-001 Spring Pin
- 41064-013 Speedometer Gear Receiver
- 654A304208 Oil Seal
- 41059-028 Speedometer Gear
- KH400
- KH500
- KZ650
- KZ750 B 76-79
- KZ900 76-77
- KZ900 LTD
- KZ900 Police
- KZ1000 A 77-78
- KZ1000 LTD 77-79
- *May Fit Others*
-
Nice reconditioned OEM Genuine Kawasaki Part. Actual part may differ from photo due to reconditioning process. Kawasaki P/N: 46098-010 Applications:- 73-75 Z1 900
- KH 250
- S1
- KH 400
- H1
- KH 500
- H2
- KZ 650
- KZ 750B
- KZ900
- 77-78 KZ1000
- 77-80 KZ1000 LTD
- KZ1000 Police (early)
- 1978 Z1R
-
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41069-018 Sold as Shown Applications:- 73-75 Z1 900
- 72-75 H2 750
- 1972 H1 500 B
- 73-75 H1 500 B
- Z1 Police
-
Out of stock
Genuine Kawasaki Part ~ Freshly powder coated Kawasaki P/N: 46094-019 Applications:- 77-80 KZ 1000 A
- 77-80 KZ 1000 LTD
- 78-81 KZ 1000 C
- 78-80 KZ 1000 D Z1R
- 76-79 KZ 750 B
- 77-79 KZ 650
- Will fit others
-
Kawasaki Genuine Part ~ Reconditioned Nice clean reconditioned part. Great for rebuilding or repair. As we have had these reconditioned, parts may not look 100% the same. Kawasaki P/N: 41050-017 Applications:- 74-75 H2
- 74-75 H1
- Z1
- KZ900
- KZ650B
- KH500
- May Fit Others
-
Kawasaki Genuine Part ~ REPLATED Not all spacers will look the same Kawasaki P/N: 92026-108 Applications:- 74-75 Z1 900
- 76-77 KZ900A
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 42036-015 Sold as shown Applications:- 76-77 KZ900A
- 73-75 Z1900
- Z1 Police
- KZ900 Police
-
Nicely polished OEM Part Kawasaki P/N: 44062-003 Applications:- 73-75 Z1 900
- 72-75 H2
- 76-79 KZ750B
- 76-77 KZ900A
- 76 KZ900 LTD
- 77 KZ1000A
- May fit others
-
Nice polished breather cover with 92055-052 O-ring Applications:- 77-78 KZ1000A
- 78-80 KZ1000A
- 76-79 KZ750B
- 78+80 Z1R
- 80 KZ1000G, Z1 Classic
- 79-80 KZ1000E Shaft
- (Early) KZ1000 Police
-
Out of stock
Genuine Kawasaki ~ Reconditioned OEM Part Hex head style. Kawasaki P/N: 33032-036 Correct for:- 74-75 Z1 900
- 76-77 KZ 900 A
- 1976 KZ 900 LTD
- 77-80 KZ 1000 (all)
- 1973 Z1 900
-
Nice Replated Bracket Kawasaki P/N: 35026-006 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 78-81 KZ1000 Police
-
Engine Mount Bolt 10 x 310mm Genuine Kawasaki Part ~ Used Cleaned & re-plated. Kawasaki P/N: 92091-022 Applications:- 73-75 Z1 900
- 76-77 KZ 900 A
- 1976 KZ 900 B LTD
- 77-80 KZ1000 (All)
- 78-80 KZ1000 D Z1R
-
Genuine Kawasaki Part. These nuts have been re-plated, so they will not all look exactly 100% the same. Some may have small marks from being removed from the motorcycle. Kawasaki P/N: 92090-007 Applications:- Z1 900
- KZ550
- KZ750 B
- Z1R
- KZ900
- KZ1000 G Classic
- S1, S2, S3
- KH400
- KZ650
- H1 500
-
Nice re-plated OEM Kawasaki parts. Our P/N: Z1CRANKBOLTKIT Kit contains 30 bolts total. Kawasaki P/N's:- 92003-109 (12)
- 92003-110 (3)
- 92003-111 (1)
- 92003-113 (1)
- 92003-106 (2)
- 92003-107 (4)
- 92003-108 (2)
- 92003-112 (4)
- 92003-114 (1)
- 73-75 Z1 900
- 76-77 KZ900A
- 76-77 KZ900 LTD
-
Genuine Kawasaki Parts ~ Used Give your project a nice added touch! Triple clamp has been freshly powder coated & includes new bolts that we have manufactured here in the U.S. Semigloss Black Powder Coated. Sold as shown. Includes Kawasaki P/N: 44039-073 Upper Triple Clamp Kawasaki 46012-008 Top Clamps (qty 2) 44041-048 Triple Clamp Pinch Bolts (qty 2) 44041-038 Steering Stem Bolt (qty 1) 92020-007 Steering Stem Nut (qty 1) 410B0800 Washer (qty 1) 461F0800 Spring Washer (qty 7) 92007-002 Bolts (qty 4) Applications:- 76-77 KZ900 A
- 1976 KZ900 LTD
- KZ900 C2 Police
- 77-80 KZ1000
- 77-80 KZ1000 LTD
- 1980 KZ1000 G (Z1 Classic)
-
Contains 16115-013 Oil Plug and 92055-049 O-Ring Applications:- 73-75 Z1 900
- KZ 1000
- KZ 1300
- KZ 900
- and more
-
Kawasaki Genuine Part ~ Used, Polished Cover comes with gasket and seal. Kawasaki P/N's: 14032-075-2H (Cover - USED) 14046-025 (Gasket) 92049-001 (Seal) Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900 A
- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- 1977-1978 KZ1000 A
-
Out of stock
Kawasaki Genuine Part ~ Reconditioned Kawasaki P/N: 41078-001 Kit includes:- 41062-005 Speedometer Cable Bushing
- 41063-001 Thrust Washer
- 41060-012 Speedometer Pinion
- 41082-001 Spring Pin
- 41064-007 Speedometer Gear Receiver
- 92050-046 Oil Seal
- 41059-016 Speedometer Gear
- 72-75 H2 750
- 73-75 Z1 900
- 73-75 H1 500
-
Kit consists of:- 2) 46012-008 Holders, fresh powder coat (select finish)
- 4) 92007-002 Bolt
- 4) Washers
- 73-75 Z1 900
- 76-77 KZ 900
- 76 KZ 900 (LTD)
- 77-80 KZ 1000
- 77-80 KZ 1000 (LTD)
- 72-75 H1 500
- 69 H1 500 (MACH III)
- 72 H2 750 (MACH IV)
- 74-75 H2 750 (MACH IV)
- 73-75 F11
- 71-73 F6
- 71-75 F7
- 71-72 F8
- 72-75 F9
- Many others
-
Nice polished kit for the clean bike, includes 4 gaskets. Kawasaki P/N's: (4) Cap 16005-027 (4) Gasket 16019-031 Applications:- 1976-1977 KZ900 A
- 1976 KZ900 LTD
- Early KZ1000 Police
- 1977-1980 KZ1000 A
- 1977-1980 KZ1000 LTD
- 1978 & 1980 Z1R
- 1979-1980 KZ1000 Shaft
- 1977-1979 KZ650
- 1977-1979 KZ650 Custom
- 1978-1979 KZ650 SR
- 1980 KZ650 LTD
- 1981 KZ650 CSR
-
Out of stock
Great reconditioned part. Kawasaki P/N's: Bracket 32049-101 Grommet 92071-056 Applications:- 1977-1978 KZ1000A
- 1977-1980 KZ1000B LTD
- 1978-1980 KZ1000C Police
- 1980 KZ1000G Classic
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 14024-008 Sold as shown Applications:- 73-75 Z1 900
- 76-77 KZ900A
- KZ900 LTD
- Z1 Police
- KZ900 Police
-
Genuine Kawasaki Part Length 31mm Collars have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 92027-160 -
OEM Kawasaki Genuine Part Kawasaki P/N: 25024-006 Applications:- 77-80 KZ1000 A
- 77-80 KZ1000 LTD
- 78-81 KZ1000 Police
- 77-79 KZ650 B
- 77-79 KZ650 Custom
- 78-79 KZ650 SR
- 1980 KZ650 E1 LTD
- 76-79 KZ750 B
- 76-77 KZ900 A
- 1976 KZ900 LTD
- *Will Fit Others*
-
104 mm long ~ Aftermarket Kawasaki Part ~ Replaces Kawasaki P/N: 2) 92003-180 Applications:- 73-75 Z1 900
- 76-77 KZ900A
-
Re-plated Front Brake Caliper Shaft Bolts Includes Spacer Kawasaki P/N: 43045-006 Bolts (2) 43040-004 Spacer (1) Applications:- 76-77 KZ900 All
- 77-80 KZ1000 All
- 76-79 KZ750B Twin
- 77-79 KZ650 All
- Will fit others
-
Kawasaki Genuine Part These parts have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 41068-049 Applications:- 1976 KH500 A8
- 77-79 KZ650 B1-B3
- 77-79 KZ650 C1-C3 Custom
- 78-79 KZ650 D1-D2 SR
- 1980 KZ650 E1 LTD
- 1980 KZ650 F1
- 76-79 KZ750 B1-B4
- 1980 KZ750 G LTD
- 76-77 KZ900 A4-A5
- 1976 KZ900 B1 LTD
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78 & 80 KZ1000 D1, D3 ZIR
- 1980 KZ1000 G1 Classic
-
Genuine - Powder Coated Very nice reconditioned part Kawasaki P/N: 32105-005 Sold as Shown Applications:- 73-75 Z1 900
Item is eligible for free domestic shipping.
-
REPRINT Provides instructions for proper use, so you can always enjoy its best performance. Catalog No: 99995-312-01 CONDITION: New - Reprint PAGES: 36 PRINT DATE: 1970 Models Covered (Seller presumes by print date year covered is 1971)- GA1-A
- GA2-A
- G3SS-A
- G3TR-A
-
Contains the following Kawasaki P/N's: 16110-002 Oil Pan 92066-026 Magnetic Oil and Drain Plug 670B2016 O-Ring 16112-002 Gasket Applications:- 1973-1975 Z1
- 1977-1980 KZ1000
- 1976-1977 KZ900A
- May fit Others
-
Kawasaki Genuine Part ~ Reconditioned Kawasaki P/N: 41069-032 Applications:- 76-77 KZ900
- 77-81 KZ1000
- Will fit others
-
Kawasaki Genuine Part ~ Replated Kawasaki P/N: 92003-098 Applications:- 1977-1980 KZ1000
- 1980 KZ1000G CLASSIC
- 1977-1980 KZ1000 LTD
- 1976-1979 KZ750
- 1978-1981 KZ1000 POLICE
- 1980 KZ750 G LTD II
- 1978 & 1980 Z1R
- 1983 KZ750 LTD BELT
- 1979-1980 KZ1000 SHAFT
- 1976-1977 KZ900
- 1976 KZ900 LTD
- 1982 CSR
- 1973-1975 Z1
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
Powdercoated New Old Stock Includes:- Kawasaki P/N: 32100-100 (1) Band
- 92075-078 (4) Rubbers
- 77-78 KZ1000A
- 79-80 KZ1000 MkII
- 77-80 KZ1000 LTD
- 80 KZ1000 G (Z1 Classic)
- 78-80 Z1R
- Early KZ1000 Police
-
Oil filter cover has been vapor blasted. OEM Kawasaki P/N: 16146-001 Superseded P/N: 14025-1112 Includes:- NOS P/N 92066-024 Oil drain
- NOS P/N: 670B1508 O-ring
- 73-75 Z1 900
- 76-77 KZ900
- 77-78 KZ1000
- May fit others
-
Out of stock
(Set of 2) Fresh powder coat, select desired finish Kawasaki P/N: 46012-008 Applications:- 73-75 Z1 900
- 76-77 KZ 900
- 76 KZ 900 (LTD)
- 77-80 KZ 1000
- 77-80 KZ 1000 (LTD)
- 72-75 H1 500
- 69 H1 500 (MACH III)
- 72 H2 750 (MACH IV)
- 74-75 H2 750 (MACH IV)
- 73-75 F11
- 71-73 F6
- 71-75 F7
- 71-72 F8
- 72-75 F9
- Many others
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
- Powder Coated Hub
- Buchanan Stainless Steel Spokes and Nipples
- New Bearings
- New DID Rim
- New Rim Band
- 1973-1975 Z1 900
- 1972-1975 H1 500
- 1972-1975 H2 750
-
Out of stock
Genuine Kawasaki ~ Used Chrome is not 100% perfect, but this is a very nice part. Kawasaki P/N: 35032-040 Applications:- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- Will fit others
-
Genuine Kawasaki ~ Reconditioned OEM Part Kawasaki P/N: 27012-010 Applications:- 73-75 Z1 900
- 77-78 KZ1000 LTD
- 1980 KZ 1000 G Classic
- 78-80 Z1R
- 77-80 KZ1000 A
- 1976 KZ 900 LTD
-
Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92003-099 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*