-
We removed a 1975 Norton Engine from this chopper frame. Girder front fork. Very unique, as the handlebars and fork are one piece. Hallcraft front wheel, we have the guts for it brake cam, etc., but the brake shoes are bad. Barnett handle grip for throttle, octagon oil tank, some chrome is rough. Rear wheel has a special hanger with junction box, not sure if it's original to Norton. Frame is set up perfectly for Norton. Side stand sits nice and level. Chrome is not nice on the control brackets. Brand new tire, but something rubbed on it and chewed it up a little. Nice winter project! ($1600.00 or call with needs.) Local pickup O.K. Possible low-cost shipping available between CT and OH Thanksgiving week, upon request. * CHECK OUT OUR VIDEO FOR A CLOSER LOOK! * -
This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repairs. MANUAL P/N: 61GC402 CONDITION: USED SEE PICTURES All pages nice, clear, and legible; edges show some wear/dirt from use/handling/storage. Cover/binding in place showing some wear/dirt from use/handling/storage. Pages: 141 Print Date: 1984 CHAPTERS:- General Information
- Lubrication
- Maintenance
- Fuel System
- Engine Removal/Installation
- Cylinder Head/Cylinder/Piston
- ATAC
- Clutch/Kickstart/Shift Linkage
- Crankcase/Transmission/Crankshaft
- Cooling System
- Front Wheel/Brake/Suspension/Steering
- Rear Wheel/Brake/Suspension
- Subframe/Expansion Chamber
- Ignition System
- Troubleshooting
- 1985 CR80R
-
This is used and has not been tested. Housing is damaged as shown. Shows 26,747 Miles Kawasaki P/N: 28011-1014 Applications:- 1981-1982 KZ1000 LTD
- 1982 KZ1100 Spectre
- 1981-1982 KZ1100A Shaft Drive
-
Nice used part. Features hole for kickstarter. OEM Kawasaki P/N: 14032-1230 Applications:- 1987-95 KLR650
- May fit others
-
Kawasaki P/N: 99924-1007-01 Condition: Used All pages are clear and legible. Some pages do have dirt/fingerprints, but they do not interfere with the information. Showing some wear and discoloration form use, age, and storage. Binding is intact, there is writing on the cover. Models Covered:- 1978 KZ650 B2A
- 1978 KZ650 D1A
- Can be used with other KZ650
-
This is a short stand for a lowered bike. Used. Genuine Kawasaki P/N: 34024-038 Measures approximately 7.5" from center of bolt to base. Applications:- 1973-75 Z1 900
- 1976 KZ900A
- May fit others
-
Sale!
This is a vintage rider's handbook for the Kawasaki 100-D1. 24 page handbook loaded with great information and wonderful photos! Genuine; bought out a dealer. Measurements: 7 1/4" x 5". Would make a great addition to your collection! Condition: Very Good Used See Photos Contents:- Location of Parts
- Specifications
- Breaking In
- Controls
- Starting the Engine
- Parking
- Maintenance and Adjustments
- Daily Checks
- Tool Kit
- Periodical Inspection Chart
-
Kawasaki P/N: 25015-026 Meter has been tested and works. Has some fading on redline and some spots inside glass. Ring is nice and overall is a nice rider-quality piece. Applications:- 73 H1 500D
- 74 H1500E
- 75 H1500F
- 76 KH500
-
Genuine Kawasaki GD550A Portable Generator Factory Workshop Manual Kawasaki Manual P/N: 99924-2013 Condition: Gently used, super nice pages. All pages clear and legible with few to no smudges, marks. Appears to have never been used. Binding is in excellent condition.Very nice manual. Contents:- General Information
- Fuel System
- Controls
- Recoil Starter
- Ignition System
- Engine
- Generator
- Troubleshooting Guide
- GD550A
-
No broken tabs. Needs a little work at the emblem area, as shown. Applications:- 76 KZ900 LTD
- 76-77 KZ900A
-
Motor# KZT000JE032164 Parting out an 82 KZ1000J, offering this motor separately. No title. 27,000 miles. Charging system works, Good rotor, selling without the carbs. Motor, ignition, starter included. The bike has been sitting for years, but inside the motor was well preserved, as shown. No broken fins. No damage. Clutch not frozen up. Ignition was replaced, new clutch gasket, transmission is good. No smoke, no oil leaks. Sold as-is. Will ship dry. Watch video below to see it run. Applications:- KZ1000J
- KZ1000 CSR
- KZ1000 LTD
- KZ1000 Police
-
Comes with complete 1015 kit from Wiseco. We use these kits on all of our restorations. -
Quality re-plated parts. OEM P/N: 92003-015 Set of 6 Applications:- 1974-75 Z1 900
- 1973-75 H1 500
- 76 KH500
- May fit others
-
Kawasaki P/N: 99920-1171-01 Condition: Used Pages are all nice clear and legible, some pages have dirt/marks, but they do not interfere with the information. This manual appears to have come in contact with fluid along the bottom but none of the pages are stuck together. Binding and cover intact. Cover is showing wear from storage/handling. As we have more than one copy of this manual, you may not receive the one pictured, but they are all in similar condition. Pages: 55 Print Date: August 1981 Models covered:- 1982 KX80 C2, D2
-
Used Genuine Harley P/N: 44111-48 Applications:- 1949-1965 Panhead
- 1966 Shovelhead
-
Used, Satin Polish Kawasaki P/N: 14030-036-80 Applications:- 72 H1B
- 73-75 H1
- 76 KH500
-
Genuine Harley, Used Harley P/N: 16203-67 Applications:- 1967-1976 XLH
- 1970-1976 XLCH
- may fit others
-
Out of stock
Kawasaki Genuine Part ~ Polished Nicely polished clutch cover with NOS gasket. Includes sight glass, as shown. Includes Kawasaki P/N's:- 14032-1091 Cover
- 14046-035 Gasket
- 1983 KZ650
- 1984 KZ700
- 84-85 ZN700
- 1983 KZ750 LTD
- 1983 KZ750
-
Out of stock
Genuine Kawasaki, Used We see no dents. There are some scratches, as shown. The scratches could be polished out if desired. Comes with original bracket and bolts. Great for the unrestored rider. Very nice part and very hard to find! Kawasaki P/N's: 35022-038 Fender Superseded P/N: 35022-045 35025-009 Bracket (2) 112G0612 Bolts Applications:- 1969-1971 H1 500
- 1972 H1 500C
-
Genuine Kawasaki, reconditioned Kawasaki P/N: 43041-1013 Applications:- 1980 KZ1000D Z1R
- 1979-1980 KZ1000A MKII
- 1979-1981 KZ1000C Police
-
Genuine Part ~ Used and replated Kawasaki P/N's: 1) 92001-113 BOLT 1) 92022-244 WASHER Application- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
- 1980 KZ1000-G1 CLASSIC
-
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
Out of stock
Genuine Kawasaki P/N: 41080-010 Resurfaced rotor with replated bolts and new locking tab washers. Date coded: 2H Kit Contains: (1) 41080-010 Rotor (4) 92001-158 Bolts (2) 92088-023 Locking Tab Washers Applications:- 1977-1978 KZ1000A
- 1978 KZ1000C Police
-
This Upper Triple Clamp has been powder coated. Genuine Kawasaki, Used Kawasaki P/N: 44039-048 Applications:-
1974-1975 H2
- 1973-1975 H1
- 1976 KH500
-
-
Genuine Kawasaki P/N: 41080-005 Great for the everyday rider. This has been drilled, as shown. Date stamped: 1V Kit includes:- (1) 41048-005 Rotor
- (4) 92001-158 Bolts
- (2) 92088-023 Lock washers
- 76-77 KZ900A
- 76 KH500
- 77-78 KZ1000A
- 77-79 KZ650B
- 76-79 KZ750B
- May fit others
-
Genuine Kawasaki P/N: 41080-005 Great for the everyday rider. Date stamped: 2C Kit includes:- (1) 41048-005 Rotor
- (4) 92001-158 Bolts
- (2) 92088-023 Lock washers
- 76-77 KZ900A
- 76 KH500
- 77-78 KZ1000A
- 77-79 KZ650B
- 76-79 KZ750B
- May fit others
-
This is from a 1982 KZ750 M1 CSR Twin. Includes the camshaft and valve covers, as shown. Used, Genuine Kawasaki Kawasaki P/N's: (2) 12004-014 Intake Valve (2) 12005-007 Exhaust Valve (1) 12044-010 Intake Camshaft (1) 12044-020 Exhaust Camshaft (1) 14025-1333 Valve Cover FARM -
Wheel consists of:- Brand new DID Rim
- Buchanan Stainless Spokes and Nipples
- Hub
- New Bearing and Seal
- 77-78 KZ1000A
- 76-77 KZ900A
- 76 KH500
- 77-79 KZ750B
- 70's KZ650
- May fit others
-
Nice condition, Date coded 7V. Kawasaki P/N: 41080-001 Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Nice condition, Date coded 9L Kawasaki P/N: 41080-001 Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Nice condition, needs to be painted. Date coded 9F Kawasaki P/N: 41080-001 Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Out of stock
Quality, reconditioned polished part. Kawasaki P/N: 42006-053 Applications:- 1974-1975 Z1 900
-
Genuine Kawasaki, Used Kawasaki P/N: 32098-028 Applications:- 1977-1980 KZ650
- 1982 KZ750M CSR Twin
- 1983 KZ750 K1 LTD Belt
-
This bike was rescued from the scrap pile. Selling for parts only. No title. 20,444 miles. Motor turns over only 180 degrees--possible bent valve. Throttle is locked up. Seat is in bad shape, as shown. Missing left side cover, Gas tank is missing the key. Motor has been painted, paint is coming off. 6-into-1 header. Head is most likely good, as well as cylinders. Fork tubes are nice, headlight stays and bucket are in solid condition. We are not KZ1300 experts, so we're looking for a new home for this bike. Many hard to find parts. CALL WITH NEEDS. 330-335-7365. PRICED TO SELL! -
VIN# JKAKZBD12CA003038 ENG#: KZT10AE014583 We are selling this bike with title, as-is, or parting out. Motor is stuck. No tank, no side covers, hole in bottom of headers. Seat pan rusty. No broken fins. Could be a good donor. Many good parts here. Coils, electrics, shock boots. Selling as-is or parting out. Good title, frame is straight. -
Expertly polished front hub, there is a nick under the disc area. Genuine Kawasaki P/N: 41034-041 Applications:- 77-78 KZ1000A
- 76-77 KZ900A
- 76 KH500
- 77-79 KZ750B
- 70's KZ650
- May fit others
-
Out of stock
ISBN 0-933078-03-X Condition: Used All pages are nice, clear and legible. Pages showing some discoloration due to age. Manual is intact. Cover is showing some wear/dirt from possible use and storage. There are a couple of liquid drip marks on the front cover. Print Date: 1980 Pages:63 -
Genuine Kawasaki, Used Kawasaki P/N: 32099-018 Applications:- 1976-1977 KZ900A based on the decal which shows 4 separate exhaust pipes/mufflers
- 1977-1980 KZ1000 LTD
-
Includes handle. Genuine Kawasaki, Used Kawasaki P/N: 32099-010 Applications:- 1974 Z1 900 as per the decal
- Will fit all Z1 but the decal varies
-
Out of stock
Nicely polished Front Sprocket Cover with Clutch Inspection Cover. Genuine Kawasaki, Used Kawasaki P/N: 14026-1017 Applications:- 1979-1980 KZ1000A MKII
- 1979-1980 KZ1000B LTD
- 1979-1981 KZ1000C Police
- 1980 KZ1000D Z1R
-
Used, Quality Made Reproduction Replaces Kawasaki P/N: 42006-061-80 Applications:- 1974-1975 H1 500
- 1976 KH500
- Will fit others
-
A nice addition for a garage, shop or den. For the manual of your favorite motorcycle. These are used and 25-35 years old. Sold as shown -
Parting this bike out. Please call with needs. 330-335-7365
Motor is stuck, missing tank, missing side covers, pipes are rusted through on bottom. Seat pan is rusty with holes. Missing point cover. Missing some airbox parts. No broken fins. Many parts are in common with the 77-78 Kawasaki KZ1000A LTD. Triple clamps would be slightly different offset. Meters, master cylinder and switches aren't too bad. If interested, please call us with needs. 330.335-7365 -
Very nice front brake rotor, it is date coded 9F (1) Rotor 41080-001 (6) Replated Brake Rotor Bolts (3) 92088-014 Locks Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Very nice front brake rotor, it is date coded 0A (1) Rotor 41080-001 (6) Replated Brake Rotor Bolts (3) 92088-014 Locks Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Very nice front brake rotor, it is date coded 9A (1) Rotor 41080-001 (6) Replated Brake Rotor Bolts (3) 92088-014 Locks Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
This piece came from a vintage drag inventory we recently acquired. Not sure if it is from a 1979 or 80 model as the part numbers differ. Should fit either, but the tubes must be used with the lower legs. Possible low-cost shipping upon request, or local pick up if preferred. WILL SEPARATE. Sold as shown - no returns -
We are parting out a 1980 KZ1000 ST. Front tire looks good, rear wheel is ok. Wiring harness looks pretty good. Call us with your needs.
