-
Call with needs! 44,670 Miles on the odometer 10 speed, shaft drive. Many parts are not genuine. We purchased this bike because we needed parts off if it for another project. Motor is stuck. Dual-range transmission. Wheels are okay, tank is fair. Has some decent parts on it. One of the fork tubes has been goofed. Exhaust has been repaired. Carbs are not complete, missing the top. Tank needs attention, could be cleaned. Seat is goofed, as shown. Sitting as is, it needs a lot of work. THE TANK HAS BEEN SOLD 10/22 -
Please call with needs! Motor SC84E***0632 Frame SC04-2000361 Offering for parts only. Stock airbag, fenders are gooned, tires are rotted out. Kick starter okay, we are getting the points cover and right side cover polished. (not shown in photos). Chain guard pretty good. Intake manifolds are junk, dyna cover has been scratched, seat lock is bad, side covers are okay. Wiring harness must be tested. Seat lock is bad. Still good parts on this bike, and some are interchangeable with the KZ1000. -
VIN# JS1GV74G 7M2100830 ENG# V718-100878 53819 miles. Will be parting out from the motor to the carbs, wheels, etc. 4 into 1 header looks like it has some bluing. Bike starts and runs as shown. Needs some clean up. Has large front forks, right fork has some leaking. Tires are old. Wheels look good, battery is not good. Motor sounds good, no smoking. We just got this bike started. No warranties. Local pickup OK. Call with needs! See video of bike running, below. -
Frame #GA-296707 Eng# G3E 09975 Frame# Motor # We've had this in storage for at least 25 years. Please see updated photos of what is left over. Must sell as-is. Give us a call if you are interested in anything off this bike or the entire piece. 330-335-7365. *Local pickup or possible low-cost shipping upon request* -
Came with a load of Triumph parts. We are not Triumph experts, so we are moving these on. We believe this motor is 63 and up because it has the transmission as part of the motor. We will be parting this out, so please call with needs. Watch our movie below for more Triumph parts! -
Yamaha P/N: LIT-11626-17-34 Condition: Gently used All pages nice, clear, and legible. There are no marks or stains. Cover and binding are in good shape. Almost like new, showing mild signs of storage. Print date: 1st Edition, April 2003 Models covered:- PW50S
-
We are parting out a 1980 KZ1000 ST. Front tire looks good, rear wheel is ok. Wiring harness looks pretty good. Call us with your needs. -
Parting this bike out. Please call with needs. 330-335-7365
Motor is stuck, missing tank, missing side covers, pipes are rusted through on bottom. Seat pan is rusty with holes. Missing point cover. Missing some airbox parts. No broken fins. Many parts are in common with the 77-78 Kawasaki KZ1000A LTD. Triple clamps would be slightly different offset. Meters, master cylinder and switches aren't too bad. If interested, please call us with needs. 330.335-7365 -
This bike was rescued from the scrap pile. Selling for parts only. No title. 20,444 miles. Motor turns over only 180 degrees--possible bent valve. Throttle is locked up. Seat is in bad shape, as shown. Missing left side cover, Gas tank is missing the key. Motor has been painted, paint is coming off. 6-into-1 header. Head is most likely good, as well as cylinders. Fork tubes are nice, headlight stays and bucket are in solid condition. We are not KZ1300 experts, so we're looking for a new home for this bike. Many hard to find parts. CALL WITH NEEDS. 330-335-7365. PRICED TO SELL! -
Please scroll down to select part number and quantity. -
Nice re-plated OEM brake shoe washer. Applications:- Z1-900
- KZ900A
- H2 750
- 73-75 H1 500
- KH 500
- May fit others
-
Genuine Kawasaki Part. These nuts have been re-plated, so they will not all look exactly 100% the same. Some may have small marks from being removed from the motorcycle. Kawasaki P/N: 92090-007 Applications:- Z1 900
- KZ550
- KZ750 B
- Z1R
- KZ900
- KZ1000 G Classic
- S1, S2, S3
- KH400
- KZ650
- H1 500
-
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41069-018 Sold as Shown Applications:- 73-75 Z1 900
- 72-75 H2 750
- 1972 H1 500 B
- 73-75 H1 500 B
- Z1 Police
-
Out of stock
This is a re-plated part. Genuine Kawasaki ~ Used Kawasaki P/N: 41069-033 Applications:- 1976-1977 KZ900
- 1977-1981 KZ1000
-
Kawasaki Genuine Part ~ Reconditioned Kawasaki P/N: 41069-032 Applications:- 76-77 KZ900
- 77-81 KZ1000
- Will fit others
-
Genuine Kawasaki ~ Reconditioned OEM Part Kawasaki P/N: 27012-010 Applications:- 73-75 Z1 900
- 77-78 KZ1000 LTD
- 1980 KZ 1000 G Classic
- 78-80 Z1R
- 77-80 KZ1000 A
- 1976 KZ 900 LTD
-
Before starting to ride your motorcycle, please read this manual thoroughly in order to know your motorcycle's capabilities, its limitations, and above all, how to operate it safely. Kawasaki Manual P/N: 99920-1165-01 CONDITION: USED. All pages nice, clear, and legible; light discoloration; some with light fingerprints or marks. Little wear or dirt to the edges. Cover showing little wear or dirt from use, handling, and storage. *As we have multiple copies of this item, you may or may not receive the one shown in photos. They are in similar condition. Nice manual! Models Covered:- 1982 KDX250-B2
-
Before starting to ride your motorcycle, please read this manual thoroughly in order to know your motorcycle's capabilities, its limitations, and above all, how to operate it safely. Kawasaki Manual P/N: 99920-1215-01 CONDITION: USED. All pages nice, clear, and legible; light discoloration; some with light fingerprints or marks. Little wear or dirt to the edges. Cover showing little wear or dirt from use, handling, and storage. *As we have multiple copies of this item, you may or may not receive the one shown in photos. They are in similar condition. Nice manual! Models Covered:- 1983 KDX250-B3
-
Before starting to ride your motorcycle, please read this manual thoroughly in order to know your motorcycle's capabilities, its limitations, and above all, how to operate it safely. Kawasaki Manual P/N: 99920-1251-01 CONDITION: USED. All pages nice, clear, and legible; light discoloration; some with light fingerprints or marks. Little wear or dirt to the edges. Cover showing little wear or dirt from use, handling, and storage. *As we have multiple copies of this item, you may or may not receive the one shown in photos. They are in similar condition. Nice manual! Models Covered:- 1984 KDX250-B4
-
Factory Genuine Kawasaki Manual. By giving your motorcycle the proper care and maintenance outlined in this manual, you will be helping to ensure it a long, trouble-free life. Due to improvements in design and performance during production, in some cases there may be minor discrepancies between the actual vehicle and the illustrations and text in this manual. 99963-0038-01 Condition may vary from pictured manual Condition: Used, shows some shelf wear and discoloration due to age. Pages: 58 Print Date: 1980 Models Covered- 1981 KDX250-B1
-
Genuine Kawasaki Part; Press cut, 52mm The collars have been re-plated, so they will not all look exactly 100% the same. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G Z1 Classic
- 78 & 80 Z1R
- early KZ1000 Police
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
-
Nice reconditioned OEM Genuine Kawasaki Part. Actual part may differ from photo due to reconditioning process. Kawasaki P/N: 46098-010 Applications:- 73-75 Z1 900
- KH 250
- S1
- KH 400
- H1
- KH 500
- H2
- KZ 650
- KZ 750B
- KZ900
- 77-78 KZ1000
- 77-80 KZ1000 LTD
- KZ1000 Police (early)
- 1978 Z1R
-
Genuine Kawasaki Part Length 31mm Collars have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 92027-160 -
These parts have been re-plated, so they will not all look exactly 100% the same as the one in the photo. Sold as shown with one bolt and two washers. These are the same parts that we use on our restorations. Kit contains the following Kawasaki P/N's (1) 92015-020 Bolt (1) 461F1200 Spring Washer (1) 92022-072 Plain Washer 12mm Applications:- 1969-1975 H1 500
- 1976 KH500
- A1, A1SS
- A7, A7SS
-
OEM Harley Davidson P/N: 34075-66 Applications:- 66-69 FL Shovelhead
- 66-81 Sportster
-
Out of stock
Quality re-plated original part. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-1265 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Quality re-plated brake springs, Sold as set of 2 OEM Kawasaki P/N: 41049-007 Superseded P/N: 41049-012 Applications:- 73-75 H1 500
- 76 KH 500
- 76-77 KZ900A
- 72-75 H2 750
- Z1 900 73-75
-
Quality re-plated brake springs, Sold as set of 2 OEM Kawasaki P/N: 41049-012 Superseded P/N: 41049-007 Applications:- 69-72 H1 500 (Front)
- 73 H1 500D (Rear)
- 72-75 H2 750 (Rear)
- W1 (Front)
- Will fit others
-
Genuine Kawasaki ~ Reconditioned Kawasaki P/N: 92037-093 Applications:- KZ1000J
- KZ1000 Police
- KZ1000 Shaft
- KZ1000G
- Z1
- KZ650
- KX125
- KZ1300
- Many more
-
Out of stock
Genuine Replated Kawasaki Part Head: Plain with stamped dot Kawasaki P/N: 113B1256A Applications:
- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 80 KZ1000G Classic
- 79-80 KZ1000 Shaft
- Z1R
- 77-80 KZ1000
-
Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92003-099 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
