-
A nice addition for a garage, shop or den. For the manual of your favorite motorcycle. These are used and 25-35 years old. Sold as shown -
Comes with complete 1015 kit from Wiseco. We use these kits on all of our restorations. -
Out of stock
Quality restoration. Vapor blasted cylinder head cover with polished ends. OEM Kawasaki P/N: 11002-009-2H Includes P/N: 11009-1025 Gasket Applications:- 78 KZ650D SR
- 77-78 KZ650C Custom
- 77-78 KZ650B
-
This is from a 1982 KZ750 M1 CSR Twin. Includes the camshaft and valve covers, as shown. Used, Genuine Kawasaki Kawasaki P/N's: (2) 12004-014 Intake Valve (2) 12005-007 Exhaust Valve (1) 12044-010 Intake Camshaft (1) 12044-020 Exhaust Camshaft (1) 14025-1333 Valve Cover FARM -
Kawasaki P/N: 11005-051 Applications:- 69-73 H1 500
-
We believe this to be a 1979 Kawasaki KE250 B3 Cylinder. It has some scratches so the bore may need re-coated or sleeved. This is a nikasil cylinder. -
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
Genuine Kawasaki Z1 900 903 cylinder has been heat-treated powder coated. Comes with complete 1015 kit from Wiseco. This year does not take the center O-ring that the 74-75 take. Each piston is marked their respective cylinders. No 2 pistons are alike. 70mm. We use these kits on all of our restorations. *Optional enhancement, if you would like we can file the black from the edges of the fins to appear as the originals came.
-
Out of stock
OEM Kawasaki P/N: 11011-065 Includes P/N:- 11013-063 Element, air cleaner
- 11012075 Cap, air cleaner
- 11011065 Body, air cleaner
- 11016009 Silencer
- 92059-124 Tube drain
- 11015-050 Inlet pipe LH outside
- 11015-051 LH inside and RH inside (2) pipe
- 11015-053 RH outside pipe
- More
- 77-78 KZ1000A
- 77-78 KZ1000 LTD
-
All appears to be in good shape, intake rubbers are hard. Removed from a 79 KZ1000 ST Genuine Kawasaki P/N: 11011-1027 Silencer Body Applications:- 1979-1980 KZ100E Shaft
- KZ1000 ST
-
Out of stock
OEM Kawasaki P/N: 11012-075 Nice used part Applications:- 77-78 KZ1000A
- Will fit others
-
Out of stock
Genuine Kawasaki Parts Kawasaki P/Ns:- 11016-006 Silencer (1)
- 220B0645 NOS Screws (2)
- 92027-149 NOS Collar (2)
- 92075-118 NOS Damper (2)
- 92022-125 NOS Washer (2)
- 72 H1B
- 73-75 H1
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Out of stock
Genuine Kawasaki - Used Polished, very nice kit. Kawasaki P/N's: 11022-005-2H Cylinder Head Cover Replaces 92003-092 Cam Cover Bolt Set Replaces 11023-006 Gasket Applications:- 73-75 Z1 900
- 76-77 KZ900
- Will work on 77-78 KZ1000
-
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
OEM Kawasaki P/N: 11034-1124 Application:- Z1R
- KZ100D
-
Out of stock
Kawasaki Genuine Part- Used- powder coated Perfect restoration or replacement part! Powder Coat finish by ACE Powder Coating Kawasaki P/N 11034-1261 Applications:- 79-80 KZ1000 LTD
- 1980 KZ1000D3 Z1R
- 1980 KZ1000G (Z1 Classic)
-
Out of stock
Genuine Replated Kawasaki Part Head: Plain with stamped dot Kawasaki P/N: 113B1256A Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 80 KZ1000G Classic
- 79-80 KZ1000 Shaft
- Z1R
- 77-80 KZ1000
-
Out of stock
Quality re-plated original part. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-1265 Applications:
- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Used set of cams for Z1 900, polished. Hollow cams Correct hollow shaft for 1973 and Early 1974 Z1- 12044-004 Intake
- 12044-005 Exhaust
- 1973 Z1 900 and Early 1974
-
Nice used camshaft set, includes sprockets and bolts, as shown. Genuine Kawasaki P/N's: 12044-014 Intake- Superseded from 12044-004
- Superseded from 12044-005
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)
-
Nice used crankshaft. Kawasaki P/N: 13031-056 Applications:- 77 KZ1000A
- KZ1000 LTD
-
Out of stock
Kawasaki P/N: 13031-1006 This one-year-only crankshaft is in nice shape. Rods and bearings feel good. No flywheel key. 10mm rotor bolt. Applications:- 78 KZ1000A
- 78 KZ1000 LTD
- 78 Z1R
-
Genuine Kawasaki OEM P/N: 13031-1046 Applications:- 81-83 KZ1000J
- 81-82 KZ1000K LTD
- 82-83 KZ1000R Eddie Lawson Replica
-
OEM Kawasaki P/N: 13031-1161 Superseded P/N: 13031-1332 This crankshaft came from an older inventory. Looks to be reconditioned. Applications:- 84-86 GPZ900
- ZX900
- 84-86 ZL900
-
Genuine Kawasaki - Used Early edition- shaft is half hollow, as shown. Kawasaki P/N: 13066-029 Kickstart Shaft 13078-011 Kickshaft Ratchet 13068-028 Kickstarter Gear 92028-126 Kickshaft Collar Applications:- KZ750 B
- KZ900 A
- KZ900 LTD
- Z1 900
- 77 KZ1000 LTD
- 77 KZ1000 A
Item is eligible for free domestic shipping.
-
Used KZ1000 crankcase with no damage. Bottom only with shift drum ad shift fork. Kawasaki P/N: 14001-107-2J Application:- 77-78 KZ1000
- May fit others
-
Out of stock
Kawasaki Genuine Part ~ Used Very nice cover. Very minimal chain marks. Has some marking on the inside as shown as well. Includes one each Used Kawasaki P/N:- 14024-007 Transmission Cover
- 92049-004 Seal
- 92050-048 Seal
- 92050-024 Seal (SS P/N: 92049-1506)
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-78 KZ1000 A
- 77-78 KZ1000 LTD
- 78 Z1R
- Early KZ1000 Police
- Early KZ900 Police
- Early Z1 Police
-
Out of stock
Quality reconditioned part, includes NOS gaskets and seals. Cover is in good condition. Has some chain marks, as shown. OEM Kawasaki P/N: 14024-007 Kit Includes:- 14024-007 Transmission cover
- 14058-004 Gasket
- 92050-024 Seal
- 92049-004 Seal
- 92050-048 Seal
- 73-75 Z1 900
- KZ1000
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 14024-008 Sold as shown Applications:- 73-75 Z1 900
- 76-77 KZ900A
- KZ900 LTD
- Z1 Police
- KZ900 Police
-
Kawasaki P/N: 14025-1127; includes 11009-1050 (gasket) This cam cover has been vapor blasted with polishing on the ends. Sold as shown. Applications:- 79-80 KZ1000 LTD
- 79-81 KZ1000 Police
