-
Out of stock
KZT00AE 007422 Plug-in motor. Came out of a bike with 15,000 miles on it, which had been sitting a while. No broken fins. Vapor blast, polished aluminum covers, cam chain, clutch bearing, valve set, valve seals, piston ring, cam chain guide, case O-ring, front sprocket lock tab, alternator grommet, stator repair kit, oil level window, cam chain roller rubber, top roller rubber and pin, tachometer gear seal and O-ring, head cover bolt, exchange bolt and screw, cam cover plug, gasket set, Shim exchange and spark plugs. Will fit in Z1 900, 77-78 KZ1000. Very nice motor. Please contact us for details or for a shipping quote: 330-335-7365 -
Nice used part, great for un-restored bike. Genuine OEM Kawasaki P/N: 41085-004 Applications:- 1974-75 Z1 900
- 76-77 KZ900A
- 74-75 H2 750
- May fit others
-
Out of stock
Kawasaki P/N: 99924-1007-01 Condition: Used All pages are clear and legible. Some pages do have dirt/fingerprints, but they do not interfere with the information. Showing some wear and discoloration form use, age, and storage. Binding is intact, there is writing on the cover. Models Covered:- 1978 KZ650 B2A
- 1978 KZ650 D1A
- Can be used with other KZ650
-
Out of stock
Kawasaki P/N: 25015-026 Meter has been tested and works. Has some fading on redline and some spots inside glass. Ring is nice and overall is a nice rider-quality piece. Applications:- 73 H1 500D
- 74 H1500E
- 75 H1500F
- 76 KH500
-
Quality re-plated parts. OEM P/N: 92003-015 Set of 6 Applications:- 1974-75 Z1 900
- 1973-75 H1 500
- 76 KH500
- May fit others
-
Out of stock
Kawasaki Genuine Part ~ Polished Nicely polished clutch cover with NOS gasket. Includes sight glass, as shown. Includes Kawasaki P/N's:- 14032-1091 Cover
- 14046-035 Gasket
- 1983 KZ650
- 1984 KZ700
- 84-85 ZN700
- 1983 KZ750 LTD
- 1983 KZ750
-
Out of stock
Genuine Kawasaki, Used We see no dents. There are some scratches, as shown. The scratches could be polished out if desired. Comes with original bracket and bolts. Great for the unrestored rider. Very nice part and very hard to find! Kawasaki P/N's: 35022-038 Fender Superseded P/N: 35022-045 35025-009 Bracket (2) 112G0612 Bolts Applications:- 1969-1971 H1 500
- 1972 H1 500C
-
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
Out of stock
Genuine Kawasaki P/N: 41080-010 Resurfaced rotor with replated bolts and new locking tab washers. Date coded: 2H Kit Contains: (1) 41080-010 Rotor (4) 92001-158 Bolts (2) 92088-023 Locking Tab Washers Applications:- 1977-1978 KZ1000A
- 1978 KZ1000C Police
-
Out of stock
Nice condition, Date coded 7V. Kawasaki P/N: 41080-001 Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Out of stock
Quality, reconditioned polished part. Kawasaki P/N: 42006-053 Applications:- 1974-1975 Z1 900
-
Out of stock
ISBN 0-933078-03-X Condition: Used All pages are nice, clear and legible. Pages showing some discoloration due to age. Manual is intact. Cover is showing some wear/dirt from possible use and storage. There are a couple of liquid drip marks on the front cover. Print Date: 1980 Pages:63 -
Out of stock
Nicely polished Front Sprocket Cover with Clutch Inspection Cover. Genuine Kawasaki, Used Kawasaki P/N: 14026-1017 Applications:- 1979-1980 KZ1000A MKII
- 1979-1980 KZ1000B LTD
- 1979-1981 KZ1000C Police
- 1980 KZ1000D Z1R
-
This is used and has not been tested. Housing is damaged as shown. Shows 30,026 Miles Kawasaki P/N: 28011-1014 Applications:- 1981-1982 KZ1000 LTD
- 1982 KZ1100 Spectre
- 1981-1982 KZ1100A Shaft Drive
-
This Original Used Kit consists of the following P/N's: (4) 68514-73 Lamp (2) 68480-73 Rear Bracket (2) 68476-73 Front Bracket Our P/N: 68514-73-Set Turn signals have been tested and they do work. The chrome is not perfect but these would be great for an unrestored bike. -
Out of stock
Kawasaki Genuine Part ~ Used Powder Coated License Plate Bracket Kawasaki P/N: 23036-007-10 Applications:- Genuine for H1A but will work on others.
- Would be correct if chromed for 69-70.
- Will also fit A1, A7, F5, F7 and more
