- 52-53 K-Model
- May fit others
-
Out of stockHarley Davidson P/N: 34951-52 This cover is in very nice shape, no cracks. Great for an un-restored bike. Application:
-
This saddlebag was removed from a GL1800 trike conversion. Black. We believe it will fit 1001-2003. May fit others. Lid features hydraulic arm. Right side. Has some scuffs from normal wear, as shown. Honda P/N: 81431-MCA-0000 Local pick up is encouraged. Possible low-cost shipping upon request. Location: FARM J/R Location: FARM J/R
-
This saddlebag was removed from a GL1800 trike conversion. Black. We believe it will fit 1001-2003. May fit others. Lid features hydraulic arm. Right side. Has some scuffs from normal wear, as shown. Honda P/N: 81231-MCA-0000 Local pick up is encouraged. Possible low-cost shipping upon request. Location: FARM J/R Location: FARM J/R
-
This manual is designed primarily for use in the shop, although it contains enough basic information to make it useful to the motorcycle owner who wishes to do hos own maintenance. It should be noted, however, that where special tools or equipment are necessary to perform maintenance correctly and safely, only the repair procedure using that equipment is explained. Kawasaki Manual P/N: 99995-212 Condition: Used. See pictures. All pages nice, clear, and legible; light discoloration; few, with light fingerprints or marks. Edges showing some wear and dirt. The cover is attached to the manual with a piece of tape at the binding. The binding is not 100% as shown but what is there seems pretty sturdy. Loaded with great photos, diagrams, information. Very nice shop manual! Includes color wiring diagram. PRINT DATE: Revised, January 1, 1972 Models Covered:
- A1 (1970-1971)
- A7 (1970-1971)
- H1 (1969-1971)
-
Genuine Kawasaki SM-2 Factory Service Manual Includes supplement for CDI Ignition The front cover shows some wear and tear and staining. There are a few small tears on the front cover, as shown. There are grease stains and other stains here and there from use. The last pages (a couple of wiring diagrams and the supplement) are stuck together. We did not try to "un-stick" them, as we did not want to cause more damage. The last page of where the supplement is appears to have been ripped. The rear cover is also stained, and has a few tears, as well. Good, complete manual. You will want to reinforce the holes on a couple of pages and stick them back into the binder. This manual has its challenges, but if you need a manual for these motorcycles, this is it. (if you need the supplement, take apart at your own risk) This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repairs. Kawasaki Manual P/N: 99995-212 Print Date: 1970 (says reprint) Models Covered:
- 1969-1971 H1 500
- 1967-1971 A1 All
- 1967-1971 A7 All
-
Out of stockGenuine Harley P/N: 44606-08 Chrome is nice as shown. Includes 25mm wheel bearings Applications:
- 2006-2008 Electra Glide
- Road Glide
- Road King
-
Out of stockBeautifully polished sprocket carrier. (Used/restored) Genuine Kawasaki P/N: 42008-040 Applications:
- 79-80 KZ1000 MKII
- 77-80 KZ1000 LTD
- 80 KZ1000G | Z1 Classic
- Early KZ1000 Police
-
Out of stockThis manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repair work. Kawasaki Manual P/N: 99924-1048-03 Printed in Japan Print Date: 1984, 1986, 1988 (Third edition) Pages: (20 Sections) CONDITION: USED. SEE PICTURES All pages nice, clear, and legible; light discoloration; may have some light fingerprints, smudges, marks, handwriting; edges show some wear or dirt from use, handling, or storage. Cover and binding in place showing some wear or dirt from use, handling, or storage. Models Covered:
- 84 ZX900-A1
- 85 ZX900-A2
- 86 ZX900-A3
- 87 ZX900-A4
- 88 ZX900-A5
- 88 ZX900-A5A
-
Front end fork assembly with wheel. We recently purchased a small warehouse of parts. This is in decent shape, front fender has some warping from storage. Front wheel is not bent. Tire looks okay. Not the original tire. Not a lot of miles on the front end. Front brakes are not working. Throttle housing still good. Has throttle lock. Sold as complete setup or will part out. Low cost shipping available upon request. Location: Gravestone Building
-
Out of stockKawasaki Genuine Part- Used- powder coated Perfect restoration or replacement part! Powder Coat finish by ACE Powder Coating Kawasaki P/N 11034-1261 Applications:
- 79-80 KZ1000 LTD
- 1980 KZ1000D3 Z1R
- 1980 KZ1000G (Z1 Classic)
-
Out of stockQuality powder coated part OEM Kawasaki P/N: 32029-1024 Applications:
- 78 + 80 Z1R KZ1000D
- 79 + 80 KZ1000 MKII
- 80 KZ1000 LT
- Some KZ1000 Police
-
Out of stockKawasaki P/N: 13031-1006 This one-year-only crankshaft is in nice shape. Rods and bearings feel good. No flywheel key. 10mm rotor bolt. Applications:
- 78 KZ1000A
- 78 KZ1000 LTD
- 78 Z1R
-
Out of stockGenuine Kawasaki Parts Kawasaki P/Ns:
- 11016-006 Silencer (1)
- 220B0645 NOS Screws (2)
- 92027-149 NOS Collar (2)
- 92075-118 NOS Damper (2)
- 92022-125 NOS Washer (2)
- 72 H1B
- 73-75 H1
-
Manufactured by ANNY in Japan. Lightweight, made out of titanium. Each pipe weighs only 4 lbs. These are prototype pipes, that have been run for about 500 miles. They produce a very nice sound. Bottom left pipe has a very tiny ding, as shown. See video below as we demonstrate these pipes on a customer’s 76 KZ900. (Bike is not for sale.) These retail for $4,000. Applications: 73-80
- Z1 900
- KZ900 LTD
- KZ1000 LTD
-
Out of stockGenuine Kawasaki P/N: 42006-013 Used part - this came off of an H1 we are parting out. Broken screws, as shown. Needs polished. Cable entry area is intact and nice. Applications:
- 69-72 H1 500 All
-
Out of stockGenuine Kawasaki P/N: 42008-034 Nicely polished Includes P/N: 601B6206 Bearing 481J6200 Ring 92050-027 Seal Application:
- 77-78 KZ1000A
-
VIN #: 7A15679H3 Cylinder measures 56mm. Has scratches. Chip on top of cylinder. Use oversized piston for perfect use, but would work as-is. Engine cases have glue on bottom, as shown in photos. Crankshaft appears good. Possible low-cost shipping available. SOLD AS SHOWN - NO RETURNS See video for further description. Location: Farm
-
Out of stockTail lamp bracket also serves as a license plate bracket. Nice OEM part. Harley P/N: 59993-80A Applications:
- 80-84 FXWG
- 84-99 FXST
- (Both with Bobber fender)
-
Out of stockQuality powder coated center stand. Replaces Kawasaki P/N: 34011-1004KIT Kit consists of:
- (1) 34011-1004 Main stand
- (1) 34023-012 Spring
- (2) 34019-014 Bolts
- (2) 92016-044 Nuts
- 73-75 Z1 900 (With 4-into-1 header)
- 77-78 KZ1000A (With 4-into-1 header)
- 78 Z1R
-
Out of stockGenuine OEM Kawasaki Part # 23036-020-21 Newly powder-coated by ACE Powdercoating Applications:
- 73-75 H1 500
- 1976 KH 500
-
Out of stockPair of Gas Tank Emblems Left & Right Emblems Great for un-restored bike. Harley P/N: 61771-72 Applications:
- 76 and up 3.5 or 5 Gallon Tanks
- 72-75 FLH
-
Out of stockQuality re-plated original part. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-1265 Applications:
- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Out of stockGenuine Replated Kawasaki Part Head: Plain with stamped dot Kawasaki P/N: 113B1256A Applications:
- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 80 KZ1000G Classic
- 79-80 KZ1000 Shaft
- Z1R
- 77-80 KZ1000