- 79-80 KZ1000 LTD
- 80 KZ1000G (Z1 Classic)
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 92027-1177 Sold as shown Applications: -
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 42036-015 Sold as shown Applications:- 76-77 KZ900A
- 73-75 Z1900
- Z1 Police
- KZ900 Police
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 14024-008 Sold as shown Applications:- 73-75 Z1 900
- 76-77 KZ900A
- KZ900 LTD
- Z1 Police
- KZ900 Police
-
Out of stock
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41078-1012 Applications:- KZ650-E1
- KZ650-F1
- KZ750-G1
- KZ1000-A4 (1980)
- KZ1000-B4 (LTD) (1980)
- KZ1000-D3/Z1R (1980)
- KZ1000-G1 (Z1 Classic)
-
These parts have been re-plated, so they will not all look exactly 100% the same as the one in the photo. Sold as shown with one bolt and two washers. These are the same parts that we use on our restorations. Kit contains the following Kawasaki P/N's (1) 92015-020 Bolt (1) 461F1200 Spring Washer (1) 92022-072 Plain Washer 12mm Applications:- 1969-1975 H1 500
- 1976 KH500
- A1, A1SS
- A7, A7SS
-
Long chain guard model Part # 47504-52A Extra hole on right side as shown Not 100% sure of application Sold as shown Application:- 52 - 53 Harley K-Model
-
This set contains the following Kawasaki P/N's: (1) 33040-025 Left (1) 33040-026 Right Our P/N: 33040-025-Set Applications:- W1
- W1SS
- W2SS
- W2TT
-
Set of 4 Kawasaki P/N: 18069-1015 Applications:- 1981-1982 KZ1000 LTD, KZ1000J, KZ1000 CSR, KZ1000 Police using J motor
- 1981-1983 KZ1100A
- 1984-1985 ZN1100 B1 B2
- 1973-1975 Z1 900 and 1977-1980 KZ1000 Custom Application
-
Out of stock
This is a very nice polished, early edition clutch cover. Has some minor scratches from shelf life. This would be a perfect addition for your favorite bike. It is lighter in weight than the late model cover. We believe this is for 73-76 because of the thinner ribs on the inside. Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 76 Kz900B LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 14032-082 cover (supersedes to 14032-121)
- 52015-004 oil gauge window
- 14046-024 gasket
-
Left hand engine cover Contains Kawasaki P/N’s: 14031-053 Cover 14045-014 Gasket (New) OEM polished dyno cover, correct for Z1 / KZ 900 Will fit up to 1978 KZ 1000 -
Contains 16115-013 Oil Plug and 92055-049 O-Ring Applications:- 73-75 Z1 900
- KZ 1000
- KZ 1300
- KZ 900
- and more
-
Out of stock
Kawasaki Genuine Part ~ Used Very nice cover. Very minimal chain marks. Has some marking on the inside as shown as well. Includes one each Used Kawasaki P/N:- 14024-007 Transmission Cover
- 92049-004 Seal
- 92050-048 Seal
- 92050-024 Seal (SS P/N: 92049-1506)
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-78 KZ1000 A
- 77-78 KZ1000 LTD
- 78 Z1R
- Early KZ1000 Police
- Early KZ900 Police
- Early Z1 Police
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Out of stock
Fork outer tubes have been brush polished. Set includes:- 44005-063 LH Outer Tube
- 44006-061 RH Outer Tube
- 44009-024 Fork Seals
- 44010-032 Dust Shields
- 220B0408A Screws
- 44045-002 Seals
- 76-77 KZ900A
- 76 KH500
- 77 KZ1000A
- 76 KZ900 LTD
- May fit others
-
Out of stock
Legs are polished to a high gloss finish. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stock
Great reconditioned part. Kawasaki P/N's: Bracket 32049-101 Grommet 92071-056 Applications:- 1977-1978 KZ1000A
- 1977-1980 KZ1000B LTD
- 1978-1980 KZ1000C Police
- 1980 KZ1000G Classic