-
Motor # 3A26200H5 This is a matching numbers motor. Numbers are genuine. Crankshaft turns freely. No visible welding. Lower right case has a chipped area as shown. Sprocket cover has insert, as shown. No title. This motor weighs 54 lbs WITHOUT the crate. This motor may be shipped, for an additional fee we can build a shipping crate. Please call us for shipping quotes. Possible low-cost shipping upon request, depending upon where you live. -
Motor # 65XLH7109 This is a matching numbers motor. Numbers are genuine. Motor turns. No visible welding Very nice. No title. This motor weighs 53 lbs WITHOUT the crate. This motor may be shipped, for an additional fee we can build a shipping crate. Please call us for shipping quotes. Possible low-cost shipping upon request, depending upon where you live. -
Out of stock
This is a very nice restored rear wheel. OEM Kawasaki P/N: 42048-042 Date code: 7D Applications:- 77-78 KZ1000A
-
This kit is for 77-80 KZ1000A, but will also work on Z1R, KZ1000A LTD or Z1 900. Cylinder head has been fitted with brand new cylinder sleeves from Wiseco. Includes 1015 Kit from Wiseco, piston 1-4, all marked, pistons, rings, pins, and clips, as well as gaskets. This is a bolt-on kit, ready to go. No broken fins on the cylinder. Applications:- 77-80 KZ1000A
- Z1R KZ1000A LTD
- Z1 900.
-
Out of stock
This cover is used, but has been polished. OEM Kawasaki P/N: 41042-009 Comes with 3 NOS screws, P/N: 222E0508A Applications:- 73-75 Z1 900
- 72-75 H2 750
- 72-75 H1 500
-
OEM Kawasaki P/N: 44037-041 Newly powder coated. Applications: 72 H1B 500 -
We believe this to be a 1979 Kawasaki KE250 B3 Cylinder. It has some scratches so the bore may need re-coated or sleeved. This is a nikasil cylinder. -
Full Size Tomos Bullet Wiring Diagram Poster (used) Page edges show some wear or dirt from use, handling, or storage. 27" wide x 19" high -
Out of stock
Quality re-plated part. Contains OEM Kawasaki P/N: 53011-008 (Seat pin) 92041-003 (Cotter pin) Applications: Each bike takes 2 each- 73-75 KZ900
- KZ900 LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- May fit others
-
This manual is designed primarily for use by trained mechanics in a properly equipped shop. However, it contains enough detail and basic information to make it useful to the owner who desires to perform his own basic maintenance and repair work. Kawasaki P/N: 99924-1015-05 Condition: USED - SEE PICTURES All pages are bright, clear, and legible; edges are showing wear/dirt from use, handling and storage. Cover/Binding in place showing wear/dirt from use, handling and storage. No loose pages. Print Date: June 22, 1989 Condition: USED SEE PICTURES All pages are nice, clear and legible; slight discoloration due to age; some pages are showing marks/fingerprints but they do not interfere with the information. Page edges are showing wear/dirt from use, handling and storage. Cover/Binding is currently in place showing wear/dirt from use, handling and storage. There is a large mark showing on the front cover but it does not show up on any of the internal pages. Print Date: Fifth Edition - June 22, 1989 Models Covered- 1979 KZ1300-A1
- 1980 KZ1300-A2
- 1980 KZ1300-B2
- 1981 KZ1300-A3
- 1982 KZ1300-A4
- 1983 KZ1300-A5
-
Genuine Kawasaki Parts ~ Used This is correct for 1975 Z1 900 (Shift pattern numbers were stamped smaller) but will work on 1974 and up. Great part for the restored bike. Includes Kawasaki P/N:- 14026-026 Chain Cover (1)
- 14026-012 Inspection Cover
- 14045-012 Gasket
- 220B0612 Screws (2)
- 74-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
-
Quality re-plated brake springs, Sold as set of 2 OEM Kawasaki P/N: 41049-012 Superseded P/N: 41049-007 Applications:- 69-72 H1 500 (Front)
- 73 H1 500D (Rear)
- 72-75 H2 750 (Rear)
- W1 (Front)
- Will fit others
-
Quality re-plated brake springs, Sold as set of 2 OEM Kawasaki P/N: 41049-007 Superseded P/N: 41049-012 Applications:- 73-75 H1 500
- 76 KH 500
- 76-77 KZ900A
- 72-75 H2 750
- Z1 900 73-75
-
Nice re-plated OEM brake shoe washer. Applications:- Z1-900
- KZ900A
- H2 750
- 73-75 H1 500
- KH 500
- May fit others
-
Serial # KZT00AE005205 Cases are in nice shape. No damage or broken bolts. Some corrosion. Will clean up. Applications:- Correct for 1977
- Will work with others.
-
Out of stock
Nice, re-plated rear chain adjusters, set of 2 OEM Kawasaki P/N: 33040-049 Applications:- 73 Early 74 Z1 900
-
Out of stock
Genuine Kawasaki - Used This kit includes Kawasaki P/N's:- 21165-001 Cover
- 21166-001 Gasket (NOS)
- 73-75 Z1 900
- 77-80 KZ1000
- 76-77 KZ900
- May work on others
-
IBM PARTS ORDER SYSTEM "This introduction is prepared to make you understand how our IBM system works and in what way our parts list is compiled so that you may be correctly guided in making use of our parts list." Condition: USED - SEE PICTURES All pages are bright, clear, and legible; edges are showing wear/dirt from use, handling and storage. Cover/Binding in place showing wear/dirt from use, handling and storage. No loose pages. Print Date: December, 1967 Condition: USED SEE PICTURES All pages are nice, clear and legible; slight discoloration due to age; some pages are showing marks/fingerprints but they do not interfere with the information. Page edges are showing wear/dirt from use, handling and storage. Cover/Binding is currently in place showing wear/dirt from use, handling and storage. Models Covered- YDS2
- Engine
- Chassis
- Numerical Index
-
This manual is designed primarily for use by trained mechanics in a properly equipped shop. However, it contains enough detail and basic information to make it useful to the owner who desires to perform his own basic maintenance and repair work. Condition: USED - SEE PICTURES All pages are bright, clear, and legible; edges are showing wear/dirt from use, handling and storage. Cover/Binding in place showing wear/dirt from use, handling and storage. No loose pages. Print Date: May 10, 1969 Condition: USED SEE PICTURES All pages are nice, clear and legible; slight discoloration due to age; some pages are showing marks/fingerprints but they do not interfere with the information. Page edges are showing wear/dirt from use, handling and storage. Cover/Binding is currently in place showing wear/dirt from use, handling and storage. Models Covered- T 500-II
- Revolutionary "Suzuki Posi-Force Lubrication"
- Right and Left side views
- Specifications
- Performance Curves
- Tips on Operation
- Trouble Shooting
- Special Tools
- Engine
- Chassis
- Electrical Equipment
- Maintenance, Inspections and Adjustments
- Periodical Inspection Chart
-
Out of stock
Kawasaki P/N: 41074-022 This rebuilt OEM wheel is in great shape! Wheel is stamped: Takasago 185 X 19 4F 303 Applications:- Z1 900
- ALL H2 750
- 72-75 H1 500
-
Out of stock
Expertly polished front hub. Genuine Kawasaki P/N: 41034-041 Applications:- 77-78 KZ1000A
- 76-77 KZ900A
- 76 KH500
- 77-79 KZ750B
- 70's KZ650
- May fit others
-
Out of stock
Wheel consists of:- Brand new DID Rim
- Buchanan Stainless Spokes and Nipples
- Polished Hub
- New Bearing and Seal
- 77-78 KZ1000A
- 76-77 KZ900A
- 76 KH500
- 77-79 KZ750B
- 70's KZ650
- May fit others
-
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been heat-treated powder coated. Comes with complete 1015 kit from Wiseco. This year does not take the center O-ring that the 74-75 take. Each piston is marked their respective cylinders. No 2 pistons are alike. 70mm. We use these kits on all of our restorations. *Optional enhancement, if you would like we can file the black from the edges of the fins to appear as the originals came. -
Frame #GA-296707 Eng# G3E 09975 Frame# Motor # We've had this in storage for at least 25 years. Please see updated photos of what is left over. Must sell as-is. Give us a call if you are interested in anything off this bike or the entire piece. 330-335-7365. *Local pickup or possible low-cost shipping upon request* -
Out of stock
New Old Stock Genuine Harley P/N: 50948-71 Applications:- 71-76 XLH
- 71-76 XLCH
-
Out of stock
Quality powder-coated part. OEM Kawasaki P/N: 23036-046 Applications:- 77-78 KZ1000A
- 76-77 KZ900A
- And more
-
Nice Kawasaki Genuine Part Kawasaki P/N: 44033-046 This Left Fork Ear / Headlamp Stay is correct for 1973 Z1 900 Will also work on:- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
-
Nice Kawasaki Genuine Part Kawasaki P/N: 44034-046 This Right Fork Ear / Headlamp Stay is correct for 1973 Z1 900 Will also work on:- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
-
Genuine Kawasaki Part ~ Used Kawasaki P/N: 21163-008 *30 day warranty for the lower 48 states Applications:- 77-78 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 80 KZ1000G CLASSIC
-
Out of stock
This is a ready-to-go bolt-on kit, complete with Wiseco 1075 kit. Freshly-bored cylinder. No broken fins. This is the same setup we use on our restorations. Applications:- 76-77 KZ900
- 77-80 KZ1000
- 73-75 Z1 900
-
1 set of 2. Vetter Serial # 13-4499 These lowers came with a 1971 CB750. Looks to be original paint. Not 100% sure about the stripes. Local pickup okay. location: farm -
Set of 2 - Used OEM Kawasaki P/N: 44013-049 Applications:- 74-77 KZ400D
- 75 KZ400S
