- 83-85 KDX200A
- 11004-1059 Cylinder head gasket
- 11009-1323 Cylinder base gasket
- 11009-1263 Reed valve gasket
- 11009-1123 Exhaust holder gasket
- 670E3045 O ring 45mm Muffler
- 11009-1264 Clutch cover gasket
- 11009-1266 Generator cover gasket
-
Out of stock
Quality reproduction top end gasket kit. Applications: -
Quality reproduction Harley gasket kit. Applications:- Late 79-85 1000cc XLH
- XLCH
- (4) 1100 Tappet guide o-ring
- (12) 11101 Rocker cover o-ring
- (4) 11132 Pushrod cover o-ring
- (4) 11157 Pushrod o-ring
- (2) 16769-73 Copper head gasket
- (2) 16774-72 Cylinder base gasket
- (2) 17536-70 Rocker cover gasket
- (12) 17955-36 Small cork washer
- (1) 27023-71 Manifold gasket
- (2) 27062-78 Manifold seal
- (1) 29058-77 Air cleaner to carb gasket
- (4) 63529-57 Rubber seal
-
Quality replacement part. Replaces Kawasaki P/N: 41080-001 Our P/N: MD4069LS Applications:- 73-75 Z1 900
- 72-75 H2 750
- 72-75 H1 500
-
Quality reproduction part Replaces Kawasaki P/N: 13144-036 16T Applications:- A1
- S1
- KH400
- S3
- H1
- KH 500
- H2
-
Quality reproduction part. Replaces Kawasaki P/N: 51048-007 Applications:- 73-75 Z1 900
- 74-75 H2 750
- Many others
-
Quality reproduction part Replaces Kawasaki P/N: 14050-006 Application:- 73-80 Z1 900
- KZ900
- KZ1000
- May fit others
-
Sold as set of 4 Kawasaki P/N: 16019-018 Applications:- Z1 900
-
Could be used as a Battery Band for Z1 Kawasaki P/N: 92072-045 (10507) Applications:- 73-75 Z1 900
- 76-78 KH400
- 74-75 S1
- 74-75 S3
- *Will Fit Others*
-
Out of stock
Kawasaki P/N: 32030-063 Nice replated front engine mount plate Applications:- 77-79 KZ650 B
- Will fit others, including some 750 four cylinders
-
Please take a look at backside for difference Replaces Kawasaki P/N: 44034-072 Doremi P/N: 10264 Applications:- Late 1975 Z1
- KZ900
- 1973-1975 Z1
- 1977-1978 KZ1000A
-
Quality reproduction part. Replaces Kawasaki P/N:54012-129 Applications:- All MT1
- 78 and earlier KV75
-
Quality reproduction part, made in Japan Kawasaki replacement P/N:43048-002 Application:- 73-75 Z1900
-
Applications:- 69-71 H1 500
- W1
- W1SS
- W2SS
- W2TR
- W2TT
-
Out of stock
Quality Japanese Made Reproduction Part Replaces Kawasaki P/N: 11015-014 Sold as Shown Applications:- 69-72 H1 500
-
40 Spoke Chrome Steel Rim DID 1.85 x 19 (WM2) Kawasaki P/N: 41025-051 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000a
- 1976 KH500A
- 72-75 H1 500 Triple
- 72-75 H2 750 Triple Disc brake model
- May work with others
-
Quality set of 8 Clutch Plates Made in Japan Vesrah P/N: VC-162 Replaces OEM P/N: 13088-030 Applications:- 73-75 Z1
- 76-77 KZ900
- 80 KZ1000G
- 78 & 80 Z1R
- 77-80 KZ1000
- KZ650
- Will work on others
-
Quality reproduction BL 305, made in Japan. Replaces OEM Kawasaki P/N: 92045-021 Applications:- 73-75 Z1 900
- 77-78 KZ1000A
- Will fit others
-
Quality reproduction part. Replaces OEM Kawasaki P/N: 35022-071 Our P/N: 81-1185 Application:- 73-75 Z1 900
-
This is a nice reproduction part. Replaces OEM Harley P/N: 41737-63 Applications:- 1958-early 79 FL, FLH, Panhead, Shovelhead
-
Quality reproduction part, made in Japan. Replaces OEM P/N: 92075-157 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- May fit others
-
.010 Made in USA by Cometic. Cometic P/N: W5025 Replaces P/N: C8095 Applications:- KZ900
- KZ1000
-
.005 Made in USA by Cometic. Replaces P/N: C8098 Applications:- KZ900
- KZ1000
-
Made in USA by Cometic. This copper head gasket came to is in a vintage drag race inventory. It was marked 740cc. It does match up to an OEM #11004-1037 head gasket. Applications:- KZ650
-
Brand new reproduction clutch lever Replaces Kawasaki P/N: 46092-022 Applications:- 76-77 KZ900A
- 76 KH500
- 77-78 KZ1000A
- Will fit others
-
Quality reproduction made in Japan. Replaces Kawasaki P/N: 23026-022 Includes NOS Kawasaki Gasket P/N: 23028-016 Please call for volume discounts. Applications:- 100cc-G5
- 175cc-F3 & F7
- 250cc SideWinder-F4
- 350cc-F5
- 350cc-F9 & S2
- 500cc-H1 / H1B / H1C / H1D / H1E / H1F
- KH500-A8
- H2 750
- May fit others.
-
Replaces OEM Harley P/N: 71029-68 0.12 thickness Applications:- 41-47 Knucklehead
- 48-65 Panhead
- 66-84 Shovelhead
- 86-95 FLST Softail
-
Replaces OEM Harley P/N: 71028-68 .060 thickness Applications:- 41-47 Knucklehead
- 48-65 Panhead
- 66-84 Shovelhead
- 86-95 Softail
-
Replaces OEM Harley P/N: 71027-68 .030 thickness Applications:- 86-95 FLST Softail
- 41-47 Knucklehead
- 48-65 Panhead
- 66-84 Shovelhead
-
Lock washers are quality made in the U.S.A. Bolts are Genuine Kawasaki NOS Our P/N: 92001-087-KIT Kit Contains:- 6) 92001-087 NOS Bolts 3) 92088-007 Locks (reproduction Johnny's)
- F6, F7, F8
- F81M, F5, F9
- and more
-
This is a very high quality reproduction which was sourced from Japan. Unpainted black ABS plastic. Replaces OEM Kawasaki P/N: 36001-054 Applications:- 77-78 KZ1000A
- 77 KZ1000B LTD
- 78 KZ1000C Police
-
This is a very high quality reproduction which was sourced from Japan. Unpainted black ABS plastic. Replaces OEM Kawasaki P/N: 36007-058 Applications:- 77-78 KZ1000A
- 77 KZ1000B LTD
- 78 KZ1000C Police
-
Set of 13 quality reproduction wire harness bands. These are nice reproductions, applicable to most models. Set includes:- 92072-030 (7 small)
- 92072-031 (2 middle size)
- 92072-032 (4 large)
-
NOS Signal Visor by Eagle Iron Replaces Harley P/N: 67786-86T Sold Separately. Applications:- Various 1986 and newer Harley Davidsons
-
Highest quality chrome reproduction head bolt set includes: 12) 92015-049 Bolt 12) 410B1400 Plain Washer 12) 461E1400 Spring Washer Part Number: HB750 STD Application:- 72-75 H2 750
-
This is a quality reproduction piston kit, made by ART in Japan. .5mm oversize, with rings, piston pin and clips. Replaces Kawasaki P/N: 13029-046 Kit includes:- 13025-030 Rings
- 92036-015 Clips
- 13002-017 Pin
- 71-72 F8, F8A 250cc
-
Quality replacement kit, made in Japan. MFR P/N: 18-2903 Replaces OEM P/N: 43028-1010 and 43028-1012 Applications:- 79-80 KZ1000A MkII
- 79-80 KZ1000B LTD
- 79-81 KZ1000C Police
- 79 KZ650 B3, D2
- 80 KZ650 E1, F1
- 81 KZ650 H1
-
Set of 8 high-quality reproduction valve stem seals. MFR P/N: 14-6388 Replaces Kawasaki OEM P/N: 92049-016 Applications:- 73-75 Z1 900
- 76-77 KZ1000
- May fit others
-
Set of Four float bowl gaskets for Mikuni 29mm smooth-bore carburetors Our P/N: G-29mm -
This came from a closed dealership. Unopened package. Not 100% sure of the application. **No returns** -
Quality reproduction part from Doremi Collection of Japan. Replaces OEM P/N: 16054-005 Doremi P/N: 10127 Applications:- 73-75 Z1 900
-
Reproduction parts. Standard size piston rings. Includes 2 pieces plus expander oil rings, sold per cylinder. Replaces OEM P/N: 13008-1001 Applications:- 77-80 KZ1000
-
TUNE UP KIT Z1 900 Futaba Breaker Point Assy Made in Japan Includes:- K-851
- 14-2011
- BR8ES Spark plugs
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Out of stock
Mini coil set 3 OHM Dual, set of 2. This is the part we use on our Z1 900 and KZ1000 73-78 restorations. Will work on others. We also have wires and lower units in stock. -
Out of stock
Comes with complete 1015 kit from Wiseco. We use these kits on all of our restorations. -
Quality reproduction part, replaces Kawasaki P/N: 25023-015 Superseded P/N: 25023-1006 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- 1977-1980 KZ1000A
- 1976-1979 KZ750B
- Early KZ650
-
Quality reproduction part which replaces oil pressure sending unit boot, which Kawasaki does not offer separately. P/N: 11013 Applications:- 73-75 Z1 900
- 1976-77 KZ900
- 1977-78 KZ1000
- May fit others
-
Quality reproduction part replaces OEM Kawasaki P/N: 43005-021 Applications:- 73-75 Z1 900
- 76-77 KZ900