- Z1 900
- H2 750
- 72 H1 500B
- 73-75 H1 500
- KZ400
- F9
- F11
- Many more
-
Out of stockSet of 4 float bowl gaskets for Mikuni Smooth Bore 29MM Carburetors. P/N: G-29MM Applications:
- Z1 900
- KZ 1000
- Anything running a Mikuni Smooth Bore Carburetor
-
Out of stockThis is a quality reproduction seat. Replaces Kawasaki P/N: 53001-076 Will fit other models with proper seat catch, but the stay bar will be in a different position. Applications:
- 73-75 Z1 900
-
Out of stockQuality reproduction part. Replaces Kawasaki P/N: 43001-044 Applications:
- 73-75 Z1 900
- 76-77 KZ900A
-
Out of stockQuality replacement part. Replaces Kawasaki P/N: 32099-015 Our Part # 10929 Applications:
- 73-75 Z1 900
- 76-77 KZ900
- Early KZ1000
- May fit others
-
Out of stockQuality reproduction part, made in Japan Replaces Kawasaki P/N: 92075-183 Kit includes:
- (2) 110B0632 6x32 bolt
- (2) 461F0600 6mm spring washer
- (2) 92022-228 6mm plain washer
- (2) 92075-121 rubber, rear fender
- (2) 92027-162 collar, rear fender
- (2) 92075-183 rubber, rear fender
- (2) 92022-227 6mm plain washer
-
Out of stockQuality reproduction part Replaces Kawasaki P/N: 45014-072 Measures 15.25" long 14" eye-to-eye Applications:
- 73-75 Z1 900
-
Out of stockQuality Reproduction Part Replace Kawasaki P/N: 43024-004 Our P/N: 60102 Applications:
- 1979-1981 KZ1300
- 1978-1980 Z1R
- 1977-1980 KZ1000A
- 1977-1980 KZ1000 LTD
- 1978-1980 KZ1000 Police
- Will fit others
-
Out of stockComplete Gasket Kit Includes the Following: 11004-048 (3) 11009-019 (3) 16062-011 (6) 18067-008 (3) 14046-014 Our P/N: VG-421 Applications:
- 69-72 H1 500
-
Very High Quality Reproduction Parts Made in the U.S.A. Zinc finish Our P/N: 92015-055-Z Axle Nut Replaces P/N: 92015-055 (Superseded by 92015-1951) Cotter Pin Replaces P/N: 550D4035 Applications:
- 73-75 H1 500
- S1B, C
- KH500 A8
- KZ400
- S3, S3A
- KH400 A3-A5
- KZ550
-
Out of stockQuality Made Reproduction Replaces Kawasaki P/N: 46091-009 Applications:
- 1973 and Early 1974 Z1 900
-
Out of stockThis is an NOS Wiseco .040 thick fiber big bore base gasket. Cylinder liner openings measure 3.25" Applications:
- 73-75 Z1 900
- KZ900
- KZ1000
- (Models with big bore sleeves)
-
This kit contains all necessary OEM replacement parts to rebuild one front brake caliper assembly. Kit made in Japan. Our P/N: 32-1289 Replaces Kawasaki P/N:
- (1) 43054-003 Dust Seal
- (1) 43049-002 Piston Seal Ring
- (4) 43052-005 Dust Boot
- (4) 43053-006 O-Ring
- (1) 43057-003 Bleeder Cap
- 1976-77 KZ900A
- 1977-80 KZ1000A
- 1979-80 KZ1000B LTD
- 80 KZ1000D Z1R
- 1979-81 KZ1000C Police
- 1980 KZ1000-G1 Classic
- 1979-80 KZ1000E Shaft
-
Out of stockCable came from a shop that closed in the late 1980's. Good quality. 8" over for extended bars or forks. Replaces Harley P/N: 38618-68 Applications:
- 1968-84 FL, FLH, FX
-
Out of stockQuality replacement part Replaces Kawasaki P/N: 26001-135 Applications:
- 76-77 KZ900A
- 76 KZ900B LTD
-
Out of stockDID 2.15 x 18 (WM3) - 40 Spoke Chrome Steel Kawasaki P/N: 41025-049 Applications:
- 73-75 Z1 900
- 69-75 H1 500 Triple
- 76-77 KZ900A
- 1976 KH500A
- 77-78 KZ1000A
- 72-75 H2 750 Triple
- May work with others
-
Out of stockNOS Genuine Kawasaki Brake Cable Kawasaki P/N: 54022-011 Applications:
- 69-71 H1
- 72 H1C
-
Out of stockThis is a set of four NGK spark plug covers for the 73-75 Kawasaki Z1 Comes as shown *Items taken out of packaging for photo purposes only Replaces Kawasaki P/N: 21130-020 & 21130-019 Our P/N: 35-8082
-
Out of stockFilter cage is dented as shown but still usable. Applications:
- 78, 79 KZ400 B1, B2
- 78 KZ400 C1
- 80, 81 KZ440 B1, B2
-
Quality aftermarket front wheel seal Replaces Kawasaki P/N: 654A254008 Applications:
- 73-75 H1 500
- 76-78 KH400 A3-A5
- 1976 KH500 A8
- 77-80 KZ1000 A1-A4, A3A
- 77-80 KZ1000 B1-B4 LTD
- 78 & 80 KZ1000 D1, D3 (Z1R)
- 79-80 KZ1000 E1-E2 Shaft
- 78-79 KZ400 B1-B2
- 77-79 KZ650 B1-B3, B2A
- 77-79 KZ650 C1-C3 (Custom)
- 78-79 KZ650 D1-D2, D1A (SR)
- 1980 KZ650 E1 LTD
- 1980 KZ650 F1
- 76-79 KZ750 B1-B4
- 1980 KZ750 G1 (LTD II)
- 76-77 KZ900 A4-A5
- 1976 KZ900 B1 LTD