- 72-75 H2 A-B-C
- 72-75 H1 C thru F
- 77-79 KE250 B1-B3
- 76 KH500-A8
-
Out of stock
Replacement Carburetor Float Kawasaki P/N: 16031-023 Our P/N: VM24/171 Applications: -
Out of stock
Complete Gasket Kit Includes the Following: 11004-048 (3) 11009-019 (3) 16062-011 (6) 18067-008 (3) 14046-014 Our P/N: VG-421 Applications:- 69-72 H1 500
-
Out of stock
Kawasaki P/N: 23026-023 Reproduction Nice quality vintage lens from old stock Applications:- Z1
- 74-75 H2
- May fit others
-
Out of stock
Kawasaki P/N: 32030-063 Nice replated front engine mount plate Applications:- 77-79 KZ650 B
- Will fit others, including some 750 four cylinders
-
Kawasaki replacement P/N: 92076-024 Set contains:- (2) 92076-024 footrest rubber
- (2) 34028-010 footrest bar
- (2) 33028-011 footrest bracket
- Z1 900
- 76-77 KZ900A
-
Replaces Kawasaki P/N: 27010-019 Superseded P/N: 27010-015 Our P/N: 10313 Application:- 73-75 Z1 900
- May fit many others
-
Replaces Harley P/N: 17034-66 Our P/N: 2519 These kits came from a shop inventory we just purchased. Made in U.S.A. Applications:- 66-77 Shovelhead top end
- Will work on 78-84 if intake manifold rubbers are changed
-
Reproduction Brake Pads Harley replacement P/N: 44135-74 Superseded P/N: FA24 Applications:- Shovelhead
- 73-83 R: FX, FXE, FXEF, FXWG, FXS
- 72-84 F: FL, FLH
- 72-80 R: FL, FLH
-
Out of stock
Set of 4 float bowl gaskets for Mikuni Smooth Bore 29MM Carburetors. P/N: G-29MM Applications:- Z1 900
- KZ 1000
- Anything running a Mikuni Smooth Bore Carburetor
-
Out of stock
We had this sprocket re-plated, as it was looking dull. 35 TOOTH Part # 42041-169 & 42041-1010 Applications:- 77-80 KZ1000LTD
- 1980 KZ1000G Z1 Classic
- 77-78 KZ1000A
- KZ750L3
- KZ750E
-
This is a new reproduction part that came from an old inventory we purchased years ago Replaces Harley P/N: 41470-30 Applications:- Some VL
- 37-47 Knucklehead
- 37-48 UL
- 48-57 Panhead
-
These are reproduction races. OEM Harley P/N: 24341-52A P/N: 24342-52A Contents Per Kit: 2) 24341-52A Lower rear- fits 57-78 XL
- fits 54-56 K-model
- 57-78 XL
-
Quality reproduction part. Replaces Kawasaki P/N: 43060-004 Applications:- 73-75 Z1 900 Left side
- 76-77 KZ900A
-
Quality reproduction NOS sprockets, made by Sunstar. P/N: 60615 Replaces Kawasaki P/N: 13144-1042 Applications:- 81-83 KZ1000J
- 82-83 KZ1000R
- 81-82 KZ1000M (CSR)
- 81-82 KZ1000K (LTD)
- May fit others
-
Please go to allballsracing.com for details before selecting your application. -
Aftermarket Sprocket from Sunstar Replaces Kawasaki P/N: 13144-046 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1976 KZ900B LTD
- 1977-1980 KZ1000A
- 1977-1980 KZ1000B LTD
- 1978 and 1980 KZ1000D Z1R
- 1978-1981 KZ1000C Police
- 1980 KZ1000G Zl Classic
-
Made by Sunstar, P'N: 61116 Replaces Kawasaki P/N: 13144-1083 This 16-tooth sprocket is one more than the original. Applications:- 1983-84 ZX1100 A1 and A2
-
Made by Sunstar, P/N: 60617 Replaces Kawasaki P/N: 13144-1042 17-tooth sprocket. Applications:- 81-83 KZ1000J
- 81-82 KZ1000K LTD
- 81-82 KZ1000M CSR
- 82-2001 KZ1000P Police
- 82-83 KZ1000R Eddie Lawson Replica
- 81-82 KZ1100B GPZ
-
This came from a closed dealership. Unopened package. Not 100% sure of the application. **No returns** -
Quality reproduction made in Japan. Replaces Kawasaki P/N: 23026-022 Includes NOS Kawasaki Gasket P/N: 23028-016 Please call for volume discounts. Applications:- 100cc-G5
- 175cc-F3 & F7
- 250cc SideWinder-F4
- 350cc-F5
- 350cc-F9 & S2
- 500cc-H1 / H1B / H1C / H1D / H1E / H1F
- KH500-A8
- H2 750
- May fit others.
-
Came from an older distributor. These will need final prep before paint. Weighs 12.4 oz. Measures 26" long, 12" tall, and 7" wide at fork mount. Replaces OEM P/N: 35003-015 Application:- 73-75 Z1 900
- Will fit others
-
Came from an older distributor. These will need final prep before paint. Weighs 12.4 oz. Measures 24" long, 8" tall, and 4 5/8" wide at fork mount. -
Set of Four float bowl gaskets for Mikuni 29mm smooth-bore carburetors Our P/N: G-29mm -
Made in USA by Cometic. This copper head gasket came to is in a vintage drag race inventory. It was marked 740cc. It does match up to an OEM #11004-1037 head gasket. Applications:- KZ650
-
.005 Made in USA by Cometic. Replaces P/N: C8098 Applications:- KZ900
- KZ1000
-
.010 Made in USA by Cometic. Cometic P/N: W5025 Replaces P/N: C8095 Applications:- KZ900
- KZ1000
-
This is a nice reproduction part. Replaces OEM Harley P/N: 41737-63 Applications:- 1958-early 79 FL, FLH, Panhead, Shovelhead
-
Quality Reproduction Parts Includes Kawasaki P/N: 1) 92007-031 Bolt 1) 92022-230 Washer Our PN: 92007-031 Applications:- 73-75 Z1 900
- 76-77 KZ900 All
- 74-75 H2 750
- 78, 80 Z1R
- 73-75 H1
-
Out of stock
Quality reproduction part! For use with 29mm smoothbore carburetor. Replaces Kawasaki P/N: 16030-025 Applications:- 73-75 Z1 900
- 71-73 F6 125
- 74-75 F7 175
-
Out of stock
New Reproduction JT Sprocket 42-Tooth Steel Rear Sprocket Replaces OEM Kawasaki P/N: 42041-1474 Our P/N: JTR 1490.42 Application:- 1996-2009 EN500 Vulcan 500 LTD
-
Quality reproduction, replaces Kawasaki P/N's: 92075-078 Rubber Damper (Kit contains 4) 92075-146 Rubber Damper (Kit contains 2) 92075-141 Rubber Damper (Kit contains 2) Also comes with 2 6mm bolts and washers, as shown Our P/N: 10808 Application:- Z1 900
- Will fit many more
-
Sold as "Set" - as Pictured Replaces OEM PN: (2) 92071-064 and (4) 92071-056 Applications:- Z1900 73 - 75
- KZ900A
- KZ1000
- May Fit Others
-
Sold as shown, a set of four. Johnny's Replaces Kawasaki P/N: 92007-002 Applications:- 1972-1975 H2 750
- 1973-1975 Z1 900
- KZ900 All
- 1979-1981 KZ1300
- May Fit Others
-
Kit includes: Replaces Kawasaki P/N: 34006-002 Spring (2) - Quality American Made Replaces Kawasaki P/N: 92022-049 Washer (2) - Quality American Made Kawasaki P/N: 480J1600 Circlip (2) - Genuine NOS Kawasaki Our P/N: 34006-002 Applications:- 1975-1979 KV75
- 1971-1985 MT1
- 1968-1971 G3SS
- 1971 G3TR
- 1970-1971 G31M
- 1967-1969 C2SS/C2TR
- 1971-1973 F6
- 1968-1970 F3
- 1971-1973 F7
- 1969-1970 F4
- 1971-1972 F8
- 1972 F81M
- 1972 S2 350
- 1969-1971 H1 500
- May fit others
-
Out of stock
Complete Gasket Kit Includes the Following: 11004-048 (3) 11009-019 (3) 18067-008 (3) 16062-011 (6) 14046-014, 14045-012, 14050-005, 16094-002 Our P/N: VG-431 Applications:- 73-75 H1 500
- 76 KH500
-
Braking P/N: 602 Our P/N / EBC P/N: FA130 Replaces OEM Kawasaki P/N: 43082-1072 & 43082-1078 Applications:- 87-88 KX 125 E2/F1
- 87-88 KX 250 E1/F1
- 87-88 KX 500 C1/D1
- 87-07 KL 650 A1-A19/A6F/A7F (KLR)
-
Out of stock
Quality Japanese Made Reproduction Parts Sold as Shown (set of 3) Our P/N: 92075-094 KIT Kit includes: (2) 92075-094 10mm thick, 18mm diameter (1) 92075-090 5mm thick, 18mm diameter Applications:- 72-73 H2 750
-
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 34019-014 Kit consists of:- (2) 34019-014 Bolts
- (2) 92016-044 Nuts
- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- 78 Z1R
-
Quality Made in Japan Our P/N: VG-4079M Applications:- 01-03 KX85
- May fit others
-
Aftermarket 48-Tooth steel rear sprocket. This item is new. Replaces Kawasaki P/N 42041-1122 Our P/N: 2-143248 Applications:- KX60 1983-2003
- KDX80 1984-88
- KX80 1984-85
-
Quality Reproduction Part Replaces Kawasaki P/N: 25008-036 Manufacturers P/N: KFR14-13786 Application:- 73-75 Z1 900
-
Quality replacement part. Replaces Kawasaki P/N: 32099-015 Our Part # 10929 Applications:- 73-75 Z1 900
- 76-77 KZ900
- Early KZ1000
- May fit others
-
Quality replacement part, made in Japan. Replaces Kawasaki P/N: 43063-003 Applications:- 73-75 Z1 900
-
Quality reproduction part. Replaces Kawasaki P/N: 25011-042 -
Quality reproduction part, made of stainless steel. Replaces Kawasaki P/N: 43060-004 Applications:- 73-75 Z1 900 Left side
- 76-77 KZ900A
-
8x30 Set of 8 Replaces Kawasaki P/N: 92004-065 Superceded Kawasaki P/N: 92004-1069 Our P/N: 92004-065-8 Quality replacement part Made in U.S.A. Applications:- 77-83 KZ 1000 (all)
- 81-83 KZ 1100 Shaft
- 81-82 KZ 1100 GPZ
- 82-83 KZ 1100 Spectre
- 83 KZ 1100 LTD Shaft
- 80-81 KZ 250
-
Aftermarket Harley 2nd Gear Counter Shaft 21 Teeth Replaces P/N: 35751-36 Vendor P/N: 17-0782 Applications:- 36-85 FL, FX
-
This kit is made up of good quality parts, including Motion Pro fuel line. Because of the size of the Pingel fuel valve, we had to use the single outlet so that it would not interfere with the stock Z1 side cover. Quality parts for a quality fuel valve. Kit Contains:- (1) fuel line 2FT Motion Pro
- (6) 1/2" clips
- (2) 5/16" clip
- (1) T line