-
Out of stock
Reproduction part Hitachi P/N: DS 195154 Replaces OEM P/N: 31572-79 -
This kit contains all necessary OEM replacement parts to rebuild one front brake caliper assembly. Kit made in Japan. Our P/N: 32-1289 Replaces Kawasaki P/N:- (1) 43054-003 Dust Seal
- (1) 43049-002 Piston Seal Ring
- (4) 43052-005 Dust Boot
- (4) 43053-006 O-Ring
- (1) 43057-003 Bleeder Cap
- 1976-77 KZ900A
- 1977-80 KZ1000A
- 1979-80 KZ1000B LTD
- 80 KZ1000D Z1R
- 1979-81 KZ1000C Police
- 1980 KZ1000-G1 Classic
- 1979-80 KZ1000E Shaft
-
Out of stock
Kawasaki P/N: 32030-063 Nice replated front engine mount plate Applications:- 77-79 KZ650 B
- Will fit others, including some 750 four cylinders
-
Nicely powder-coated right rear motor mount plate Kawasaki P/N: 32030-065 Applications:- KZ650 B
- KZ650 C
- KZ650 D
- KZ650 E1
- KZ650 F1
- Will fit others, including some 750 four cylinders
-
Quality replacement part. Replaces Kawasaki P/N: 32099-015 Our Part # 10929 Applications:- 73-75 Z1 900
- 76-77 KZ900
- Early KZ1000
- May fit others
-
We recommend changing out all of the petcocks on our restorations to the Pingel unit. Here we have the dual-outlet. Quality made in the U.S.A. These will fit other models with the proper adapter. Give us a call for more info if your bike is not listed here. Applications:- 76-77 KZ900A
- 76 KZ900 LTD
- 77 KZ1000A
- Will work on others
-
Aftermarket 1st and 2nd Mainshaft Gear # Teeth 15 x 20 Replaces P/N: 33282-59 Vendor P/N: 17-0197 Applications:- 59-84 FL, FLH
-
Out of stock
Aftermarket Harley Kickstart Clutch Gear Replaces P/N: 33381-39 Vendor P/N: 17-0417 Applications:- 39-74 FL, FX
-
Out of stock
Aftermarket Harley Kickstart Starter Gear 16 Teeth Replaces P/N: 33430-50 Vendor P/N: 17-0401 Applications:- 36-84 FL, FX
-
Out of stock
Complete Aftermarket Kickstarter 16 Tooth Ratchet Gear Kit Replaces P/N: 33430-50-KIT Vendor P/N: 17-0404 Kit includes:
- 33430-50 16T gear
- 33381-39 Starter clutch gear
- 33391-36 Spring
- 33393-50 Key
- 36-69 FL
-
Out of stock
Will replace the following part #s 69-74 CB750:- 33400-341-702
- 33450-341-702
- 33650-300-000
- 33610-300-000
- Will fit others
-
Kit includes: Replaces Kawasaki P/N: 34006-002 Spring (2) - Quality American Made Replaces Kawasaki P/N: 92022-049 Washer (2) - Quality American Made Kawasaki P/N: 480J1600 Circlip (2) - Genuine NOS Kawasaki Our P/N: 34006-002 Applications:- 1975-1979 KV75
- 1971-1985 MT1
- 1968-1971 G3SS
- 1971 G3TR
- 1970-1971 G31M
- 1967-1969 C2SS/C2TR
- 1971-1973 F6
- 1968-1970 F3
- 1971-1973 F7
- 1969-1970 F4
- 1971-1972 F8
- 1972 F81M
- 1972 S2 350
- 1969-1971 H1 500
- May fit others
-
Out of stock
Quality powder coated center stand. Replaces Kawasaki P/N: 34011-1004KIT Kit consists of:- (1) 34011-1004 Main stand
- (1) 34023-012 Spring
- (2) 34019-014 Bolts
- (2) 92016-044 Nuts
- 73-75 Z1 900 (With 4-into-1 header)
- 77-78 KZ1000A (With 4-into-1 header)
- 78 Z1R
-
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 34019-014 Kit consists of:- (2) 34019-014 Bolts
- (2) 92016-044 Nuts
- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- 78 Z1R
-
Side Stand with Fresh Powder Coat Also Comes with New High Quality Aftermarket Bolt Kit Kit contains Kawasaki Part Number: 34024-038 Stand Superseded P/N: 34024-060 92003-079 Bolt 92019-021 Nut Applications:- 73-75 Z1 900
- KZ900A
-
Kawasaki P/N: 34025-005 Applications:- 73-75 Z1
- 76-77 KZ900
- 77-83 KZ1000
- KZ650
- KZ440
- Many more
-
Out of stock
Quality replacement parts Set consists of:- (1) 24028-011 left footrest
- (1) 34028-012 right footrest
- (4) 92075-140 rubber bushings
- (1) 34003-036 left bracket
- (1) 34003-037 right bracket
- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- 77-78 KZ1000 LTD
- 76 KZ900 LTD
-
Out of stock
This kit is for 77-80 KZ1000A, but will also work on Z1R, KZ1000A LTD or Z1 900. Cylinder head has been fitted with brand new cylinder sleeves from Wiseco. Includes 1015 Kit from Wiseco, piston 1-4, all marked, pistons, rings, pins, and clips, as well as gaskets. This is a bolt-on kit, ready to go. No broken fins on the cylinder. Applications:- 77-80 KZ1000A
- Z1R KZ1000A LTD
- Z1 900.
-
Sold as a set of 2 with washers Very high quality reproduction part Made in the U.S.A. Replaces Kawasaki P/N's: 1) 92001-115 1) 110N0618 Screws Replaces Kawasaki P/N's: 1) 92022-195 1) 92022-125 Washers Our P/N: 35-115 Applications:- 76-77 KZ 900
- 73-75 Z1 900
- 1978 KZ 1000D Z1R
- 1977-1978 KZ1000
-
Sold as a set of 2 with washers Very High Quality Reproduction Part Made in the U.S.A. Our P/N: 35-115-2 Replaces P/N: 92001-115 Washers Replace P/N: 92022-195 Applications:- 78-79 KZ400 B
- 1978 KZ400 C
- 80-81 KZ440 B
- 77-79 KZ650 B
- 77-79 KZ650 C Custom
- 1980 KZ650 F1
- 76-79 KZ750 B
- 1980 KZ1000 (Z1R)
-
Sold as a set of 3 with washers Very High Quality Reproduction Part Made in the U.S.A. Our P/N: 35-115-3 Replaces P/N: 2) 92001-115 1) 110N0618 Washers Replace P/N: 2) 92022-195 1) 92022-125 Applications:- 79-80 KZ1000A
- MKII
-
Sold as a set of 3 with washers - Zinc Very High Quality Reproduction Part Made in the U.S.A. Our P/N: 35-115-3-Z Replaces P/N: 2) 92001-115 1) 110N0618 Washers Replace P/N: 2) 92022-195 1) 92022-125 Applications:- 79-80 KZ1000A
- MKII
-
This kit is made up of good quality parts, including Motion Pro fuel line. Because of the size of the Pingel fuel valve, we had to use the single outlet so that it would not interfere with the stock Z1 side cover. Quality parts for a quality fuel valve. Kit Contains:- (1) fuel line 2FT Motion Pro
- (6) 1/2" clips
- (2) 5/16" clip
- (1) T line
-
Out of stock
This is a set of four NGK spark plug covers for the 73-75 Kawasaki Z1 Comes as shown *Items taken out of packaging for photo purposes only Replaces Kawasaki P/N: 21130-020 & 21130-019 Our P/N: 35-8082 -
This kit is made up of good quality parts, including Motion Pro fuel line. Quality parts for a quality fuel valve. Kit Contains:- (1) fuel line 2F Motion Pro
- (12) 1/2" clips
- (3) 5/16" clip
-
We designed this bracket to be used on Z1 900 and KZ900A when the stock exhaust has been removed and the header is mounted. (Example: Vance & Hines, Kerker, Yoshimura) This part keeps the center stand from hitting the chain.* Our P/N: 35-CS10mm ID mounting hole-10mm Freshly powder coated by Ace Powder Coating! Applications:- 73-75 Z1 900
- 76-77 KZ900A
-
Out of stock
Quality reproduction part. Replaces OEM P/N: 35003-015 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- Will fit others
-
Came from an older distributor. These will need final prep before paint. Weighs 12.4 oz. Measures 26" long, 12" tall, and 7" wide at fork mount. Replaces OEM P/N: 35003-015 Application:- 73-75 Z1 900
- Will fit others
-
Out of stock
Quality Reproduction Replaces Kawasaki P/N: 35004-1012 Applications:- 1977-1980 KZ1000B LTD
- 1976 KZ900B LTD
- 1980 KZ750G LTD
-
Quality reproduction part. Replaces OEM Kawasaki P/N: 35022-071 Our P/N: 81-1185 Application:- 73-75 Z1 900
-
Out of stock
Quality reproduction part. Replaces OEM P/N: 35022-072 Includes P/N 92075-176 license plate rubber Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- Will fit others
-
Dress up your H1 with this QUALITY American made product! Replaces Kawasaki P/N: 35032-021 Application:- 69-72 H1 500
