- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
-
3 separate gaskets. Copper gaskets are .010 thick, with cylinder sleeve holes measuring 3.5". The mylar gasket has 3.25" holes. These may not go together. All 3 gaskets sold as a single item. Applications: -
These kits are over 40 years old. Made in the U.S.A. (Plating may not look the same, as they are old.) Kit includes:- P/N: 29533-55A Magneto
- P/N: 29534-55A Condenser
-
Reproduction sprocket Replaces Kawasaki P/N: 42041-1058 +1 Tooth Applications:- 81-82 KZ1000 J
- 82-95 KZ1000 P
- 81 KZ1100 B1 GPZ
-
High Quality Replacement Brake Pads Replaces Kawasaki P/N: 43051-009 and 43050-008 Applications:- 77-78 KZ1000 LTD
- 76 KZ900 LTD
- 76-79 KZ750 B
- 77-79 KZ650C up to frame # 023100
-
Out of stock
Complete Aftermarket Kickstarter 16 Tooth Ratchet Gear Kit Replaces P/N: 33430-50-KIT Vendor P/N: 17-0404 Kit includes:- 33430-50 16T gear
- 33381-39 Starter clutch gear
- 33391-36 Spring
- 33393-50 Key
- 36-69 FL
-
Aftermarket sprocket from Sunstar Sunstar P/N 60515 Replaces Kawasaki P/N: 13144-046 or 13144-062 Applications:- 1973-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B LTD
- 77-80 Kz1000A
- 77-80 Kz1000B LTD
- 78 & 80 Kz1000D Z1R
- 78-81 Kz1000C Police
- 1980 Kz1000G Z1 Classic
-
Bearings to fit rear brake hub and sprocket carrier. Kit P/N: 0215-0830 Replaces Kawasaki P/N's: 1) 601B6304Z Bearing 1) 601B6304 Bearing 1) 601B6206 Bearing 1) 92050-027 Seal Applications:- 1972-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- May fit others
-
Includes P/N 25012-023 Speedometer Cover 25012-024 Tachometer Cover Our P/N: 58-85100 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- KZ1000 77-78
- Z1 900 73-75
- May fit others
-
High Quality Replacement Brake Pads Replaces Kawasaki P/N: 43051-001 and 43050-002 Applications:- 73-75 Z1 900
- 74-75 H2 750
- 73-75 H1 500
-
High Quality Replacement Brake Pads Replaces Kawasaki P/N: 43050-005 and 43051-006 Applications:- 78 Z1R
- 77-78 KZ1000 A
- KZ900 A
- KZ750 B
-
Quality Re-manufactured Part, Made in the U.S.A. Kawasaki P/N: 92003-071 Application:- 1972-75 H2 750 Mach IV
-
Quality reproduction part, made in Japan Doremi P/N: 50087 Replaces Kawasaki P/N: 26004-1006 Applications:- 79-80 KZ1000 MKII
- KZ1000 G
- 80 Z1R / KZ1000D
- 79-80 KZ1000 LTD
- Will fit others
-
Quality reproduction part. Replaces Kawasaki P/N: 13242-006 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-80 KZ1000A
- Many others
-
Out of stock
Quality reproduction part. Replaces Kawasaki P/N: 54011-030 Vendor P/N: 14072 Applications:- 69 H1 500 Mach III
- 72 H1 500 C
- 73 H1 500 D
- 74 H1 500 E
- 75 H1 500 F
- 76 KH500 A8
-
Good quick fix for meters that have been dented, or flaking Our P/N: 58-12410 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- May fit others
-
This cable has the outer spring like the original. High Quality Made in Japan. Replaces Kawasaki P/N: 54011-048 Our P/N: 10415 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1978 KZ1000A
- 76 KZ900 LTD