- Baby Jane – Rod Stewart
- The Lucky one – Laura Branigan
- Against All Odds – Phil Collins
- Doctor! Doctor! – Thompson Twins
- Jeopardy – Greg Kihn Band
- Got A Hold On Me – Christine McVie
- That's All – Genesis
- You Cant Stop Rock And Roll – Twisted Sister
- Theme – Taking It To The Limit
-
Warner Special Products LP Special compilation of artists and songs from the 80's Still in wrapper, corners slightly dog-eared. These have been in storage for years. Singles included: -
A nice addition for a garage, shop or den. For the manual of your favorite motorcycle. These are used and 25-35 years old. Sold as shown -
Quality Made in Japan ENERJET P/N: 12N5.5-3B L: 135mm W: 60mm H: 130mm Acid not included. 60 day warranty in lower 48 states. Application:- Yamaha: 76-79
- RD400
- 84-85 RZ350
- YR2
- DS7 250
- ASC2
- HSI 90
- will fit others
-
New Old Stock Genuine Honda P/N: 14500-413-000 Applications:- 78-81 CB400
- 79-81 CM400
-
New Old Stock Genuine Honda P/N: 14510-413-000 Applications:- 78-81 CB400
- 79-81 CM400
- 82-86 CB450
- 82-83 CM450
-
Genuine Honda P/N: 16016-287-610 -
Came with a load of Triumph parts. We are not Triumph experts, so we are moving these on. We believe this motor is 63 and up because it has the transmission as part of the motor. We will be parting this out, so please call with needs. Watch our movie below for more Triumph parts! -
This wheel came with a load of Triumph parts. We are not Triumph experts, so we are moving these on. Backing plate has a little decaying but looks good on the back side. Axle intact, guts are complete. Hub cap is in rough shape. Rims are very rusty but the guts are intact and good, as shown. Watch our movie below for more Triumph parts! -
This wheel came with a load of Triumph parts. We are not Triumph experts, so we are moving these on. Backing plate looks good. Axle intact, guts are complete. Hub cap is in rough shape. Rims are very rusty but the guts are intact and good, as shown. Watch our movie below for more Triumph parts! -
Engine turns over nicely and transmission shifts through all gears. Connecting rod feels good. Crank bearings feel as they should. Shifter shaft has been cut, as shown. Case has been welded around the lower cover mount boss. (See pictures of left side.) Local pickup is encouraged. *Call for shipping quote* -
Frame # SC049CA207534 Sold with title *Call for shipping quote* -
New, made by Maier U.S.A. P/N: 205800L Applications:- 1971-73 CB500 Four
- 1974-76 CB550K
-
Quality reproduction NOS sprockets, made by Sunstar P/N: 51515 Replaces Honda P/N: 23801-KE7-600 15 Tooth Applications:- VF500C MAGNA
- VF500F INTERCEPTOR
-
Out of stock
New Old Stock Genuine Yamaha P/N: 278-81621-20-00 & 278-81622-20-00 Applications:- 72 DS7
- 73-75 RD250
- 70-72 R5
- 73-75 RD350
-
Out of stock
Left Hand Side Cover Carmine Red Yamaha P/N: 2G2-21711-00-E9 Has some scratches and could use a good clean up. Appears all the tabs are intact. We believe these came off of a 1979 -
Quality Japanese made condenser Made by Koyo (Okamoto Electric Co) Quantity of 2 required per bike. Sold each. Replaces Honda P/N: 30250-333-004 Our P/N: 617-007 Applications:- 73-74 CB350F, F1 (4-cylinder)
- 75-77 CB400F (4-cylinder)
-
Quality Japanese made condenser Made by Koyo (Okamoto Electric Co) Replaces Honda P/N: 30280-292-670 Superseded by: 30280-292-671, 30280-292-672, 30280-371-000 Our P/N: 617-020 Applications:- 68-73 CB350 K1-K4
- 1973 CB350 G
- 68-73 CL350 K1-K5
- 69-73 SL350 K1-K2
- 69-74 CB450 all
- 68-74 CL450 K1-K6
- 75-76 CB500T
- 75-77 GL1000
-
Out of stock
Will replace the following part #s 69-74 CB750:- 33400-341-702
- 33450-341-702
- 33650-300-000
- 33610-300-000
- Will fit others
-
Came from an older distributor. These will need final prep before paint. Weighs 12.4 oz. Measures 26" long, 12" tall, and 7" wide at fork mount. Replaces OEM P/N: 35003-015 Application:- 73-75 Z1 900
- Will fit others
-
This rim lock is compatible for a 2.50-3.oo" rim size. Uses...cafe racer, vintage drag race, vintage road race. Kawasaki P/N: 41025-053 Applications:- F81M
- F9
- many others
-
We purchased an older distributor's inventory, and these came with it. They appear to be very high quality locks. This rim lock is compatible for a 3.25-3.50 rim size. Uses...cafe racer, vintage drag race, vintage road race. Will be a great part for vintage motorcross front wheels. Reference Kawasaki P/N / Our P/N: 41025-053 Applications:
...and many othersHonda Kawasaki Yamaha CRF70 KX60 YZ250 XR70 F7 XR80 A1 Scrambler A7 Elsinore KX250 -
These rotor covers are in excellent condition, as shown. Very minor nicks at top. Front Right P/N: 44111-MN5-000 Serial # 44111-MAF-000ZB Front Left P/N: 44211-MN5-000 Serial # 44211-MAF-000ZB Applications:- 88 GL1500A
- 88 GL1500 AC
- May fit 89 GL1500
-
All Balls Racing P/N: 56-126 Applications:- KTM Adventure 390
-
Quality Japanese Made Parts Replaces Honda P/N: 30203-300-005 Superseded by P/N: 30203-323-005 Our P/N: 616-009 Applications:- 75-77 CB400F
- 72-73 CB500 K1-K2
- 76-78 CB550K
- 76-77 CB550F
- 76-78 CB750K
- 76-78 CB750F
- 76-78 CB750A
-
This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repairs. MANUAL P/N: 61GC402 CONDITION: USED SEE PICTURES All pages nice, clear, and legible; edges show some wear/dirt from use/handling/storage. Cover/binding in place showing some wear/dirt from use/handling/storage. Pages: 141 Print Date: 1984 CHAPTERS:- General Information
- Lubrication
- Maintenance
- Fuel System
- Engine Removal/Installation
- Cylinder Head/Cylinder/Piston
- ATAC
- Clutch/Kickstart/Shift Linkage
- Crankcase/Transmission/Crankshaft
- Cooling System
- Front Wheel/Brake/Suspension/Steering
- Rear Wheel/Brake/Suspension
- Subframe/Expansion Chamber
- Ignition System
- Troubleshooting
- 1985 CR80R
-
Quality Made in Japan ENERJET P/N: 6N2-2A-1 6 Volt Battery L: 70mm W: 46mm H: 95mm Does not include acid. 60 day warranty in lower 48 states. Application:- Honda CA110/S65
- May fit others
-
Quality Made in Japan ENERJET P/N: 6N2-2A-1 6 Volt Battery Does not include acid. 60 day warranty in lower 48 states. L: 70mm W: 46mm H: 95mm Application:- Honda CA110/S65
- May fit others
-
Quality Made in Japan ENERJET P/N: 6N2-2A-4 6 Volt Battery L: 70mm W: 46mm H: 95mm Does not include acid. 60 day warranty in lower 48 states. Applications: Honda- XL100 79
- XL110 83
- XL125 79-84
- XL185 79-83
- XL250 78-81
- XL500 79-81
- May fit others
-
Custom chrome pike nut. 6mm thread Part Number: 7510-1 Application:- Honda CB750
- Honda CB550
-
This chain housing has some rust on the bearing surfaces from a long shelf life but will clean up easily. Yamaha P/N: 802-47541-00-00 Applications:- 1968 SL351
-
Yamaha P/N: 807-11311-00-00 We purchased a large inventory of cylinders that included these NOS SL 396 Left Side Cylinders. We believe they will fit 69 SL396 and may work on others. Would recommend a small hone job. These have been sitting a long time and the oil has dried in spots. No broken fins. Original packaging is in various conditions as we have multiple quantities. -
This saddlebag was removed from a GL1800 trike conversion. Black. We believe it will fit 1001-2003. May fit others. Lid features hydraulic arm. Right side. Has some scuffs from normal wear, as shown. Honda P/N: 81231-MCA-0000 Local pick up is encouraged. Possible low-cost shipping upon request. Location: FARM J/R Location: FARM J/R -
This saddlebag was removed from a GL1800 trike conversion. Black. We believe it will fit 1001-2003. May fit others. Lid features hydraulic arm. Right side. Has some scuffs from normal wear, as shown. Honda P/N: 81431-MCA-0000 Local pick up is encouraged. Possible low-cost shipping upon request. Location: FARM J/R Location: FARM J/R -
VIN# JS1GV74G 7M2100830 ENG# V718-100878 53819 miles. Will be parting out from the motor to the carbs, wheels, etc. 4 into 1 header looks like it has some bluing. Bike starts and runs as shown. Needs some clean up. Has large front forks, right fork has some leaking. Tires are old. Wheels look good, battery is not good. Motor sounds good, no smoking. We just got this bike started. No warranties. Local pickup OK. Call with needs! See video of bike running, below. -
This manual is designed primarily for use by trained mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the user who desires to carry out his own basic maintenance and repairs. Suzuki Manual P/N: 99500-38020-03E Condition: Gently Used. All pages nice, clear, and legible; light discoloration due to age. Edges have minor smudges, but in no way interferes with information. Unbound manual, out of original packaging. 3-hole drilled, ready to put in your own binder. Print Date: October, 1990 Models Covered:- VS700GLE
- 1987 VS700GLH
- 1988 VS750GLJ
- 1989 VS750GLK
- 1990 VS750GLFL/GLPL
- 1991 VS750GLFM/GLPM
- 1992 VS800GLN
- 1993/1994 VS800GLP/R
- 1995 VS800GLS
- Supplementary: 1996 VS800GLT
-
This Shop Manual details the proper servicing and repairing procedures for mechanics working on the Honda 500, Model CB500. Carefully reading the complete section before beginning the work and following the steps in order given will result in better maintenance and repair with less trouble and time consumed. Always keep the recommended special tools at the work bench when performing repairs. Use only genuine HONDA replacement parts. Service data for individual parts is consolidated into a single section at the rear of the text, for quick reference. The descriptions and specifications in this manual are those in effect at the time this manual was approved for printing. Shop Manual: A 1000610 Printed in Japan by Honda Motor Co., LTD. Condition: Rough. Back cover is off. Pages are dog-eared and there are some stains in the front of the book. Models Covered- 1971 Honda CB500
-
Standard motorcycle license plate frame from a long-time BMW, Yamaha, Moto Guzzi, Suzuki, Kawasaki motorcycle dealer in Wooster, Ohio now closed. -
Service - Repair - Maintenance Clymer Manuals are user-friendly and written in an easy-to-follow format that includes the following features: Two-column layout with large print. Step-by-step instructions. Thumb-tabbed chapters for quick access. Detailed exploded views and photos. Numbered table of contents and extensive index. Bold figure number to quickly match instructions with illustrations and photos. Clymer Manual: M437 Condition: New, still in wrapper Models Covered- 1997-2001 CR250R
-
Cycle World Literature ~ Used
CONDITION: USED All pages nice, clear, and legible; free of fingerprints, marks, and smudges; edges show very light wear/dirt from use, handling, or storage. Cover and binding are in place showing very minor wear from use, handling, or storage.
Print date: 1987
Models covered: T100 R D'tona Trident 750 Dunstall 750 Daytona Racer Tiger Cub & 650 500 Metisse 650 Saint Trophy 250 & 500 350 T120 R Bonneville
-
Sold as set of four plugs Honda P/N: 98069-55916
