- 73-75 Z1 900
- 76-77 KZ900A
- More
-
Out of stock
Sold as set of 2. These shock lowers were removed from a KZ1000A. Sold as shown, no returns. Applications: -
Out of stock
Rear Chain Adjuster with Bolt and Nut Genuine Kawasaki P/N: 33040-063 The chain adjusters have been re-plated Washers on inside 10mm thread Sold as a set of 2 Applications:- 74-Mid 75 Z1 900
-
Reproduction part. Replaces Kawasaki P/N: 12006-010 Superseded P/N: 12013-001 Applications:- 73-75 Z1 900
- KZ900
-
Reproduction part. Replaces Kawasaki P/N: 12006-011 Superseded P/N: 12013-002 Applications:- 73-75 Z1 900
- KZ900
-
Yuasa P/N: YTX14AHL-BS Best battery for Z1 and Early KZ1000. Sealed battery. -
P/N: EK630-92 Superseded P/N: DID630-92 Applications:- This is the chain for Z1 900 and KZ 900 using stock gearing
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 92004-045 Our P/N: 92004-045-KIT Kit includes:- (4) 92004-045
- (4) 92004-046
- (4) 92004-047
- 73-75 Z1 900
- KZ 1000
-
New Old Stock Genuine Kawasaki P/N: 20P0635 Sold as set of 2 Applications- 1981-1983 KZ1000J
- 1981-1982 KZ1000 LTD
- 1981-1982 KZ1000 CSR
-
Out of stock
We removed this wheel from a Z1 900. Very nice drum. We can remove the drum for lower-cost shipping. Can also replace to 18" for additional cost. See video below. Applications:- 73-75 Z1 900
- 76-77 KZ 900A
- Late 73-75 H2 750
-
New Old Stock Genuine Kawasaki P/N: 12007-011 Applications:- 77-78 KZ1000A
- 73-75 Z1 900
-
New Old Stock Genuine Kawasaki P/N: 18069-046 Applications:- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
-
Nice re-plated OEM Kawasaki parts. Our P/N: Z1CRANKBOLTKIT Kit contains 30 bolts total. Kawasaki P/N's:- 92003-109 (12)
- 92003-110 (3)
- 92003-111 (1)
- 92003-113 (1)
- 92003-106 (2)
- 92003-107 (4)
- 92003-108 (2)
- 92003-112 (4)
- 92003-114 (1)
- 73-75 Z1 900
- 76-77 KZ900A
- 76-77 KZ900 LTD
-
New Old Stock 2nd gear drive shaft, not all in original box. Kawasaki P/N: 13130-032 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 78 + 80 Z1R KZ1000G
- and more
-
Quality American Made Front Fork Lower Leg Stud Kit Our P/N: 172G0835-KIT Superseded P/N: 92004-1009 Pack of 4 each:- 172G0835 Bolt
- 461F0800 Spring washer
- 310B0800 Nut
- 72-73 Z1 900
- 77-78 KZ1000A
- 73-75 H1 500
- 76 KZ500
- 76-77 KZ900A
- And more
-
Quality reproduction part. OEM Kawasaki P/N: 46094-011-21 Applications:- Z1 900
- H2 750
- 72 H1 500B
- 73-75 H1 500
- KZ400
- F9
- F11
- Many more
-
New Old Stock Genuine Kawasaki P/N: 41039-019 Applications:- 73-75 Z1 900
- 72 H1 B
- 73-75 H1 500
- 72-75 H2
-
Replated OEM part Kawasaki P/N 92003-099 Applications:- Z1 900
-
Made in Japan by Daiichi Replaces Kawasaki P/N: 21008-028 Superseded P/N: 21008-022 Applications:- KZ550
- KZ650
- KZ900
- KZ1000
- Z1 900
-
P/N: K1075 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:- 4 Cylinder sleeves
- 4 Pistons
- 4 Ring sets
- 4 Piston pins
- 8 Circlips
- Base gasket
- Head gasket
- Z1 900
- KZ1000
-
P/N: K1015 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:- 4 Pistons
- 4 Ring sets
- 4 Piston pins
- 8 Circlips
- Base gasket
- Head gasket
- Z1 900
- KZ1000
-
Genuine Kawasaki. These are all NOS but have been re-plated due to shelf life. New Old Stock P/N: 92001-012 Applications:- Z1 900
- KZ900
- 77-80 KZ1000
- H1 500
- H2 750
- A1
- A7
- MT1
- Many more
-
Quality reproduction part Replaces Kawasaki P/N: 43069-002 Applications:- 76-79 KZ750
- KZ650B
- 72-75 H2 750
- KZ650C
- 73-75 H1 500
- S2, S3
- KH500
- KH400
- Z1 900
- Will fit others. Please check first.
-
Out of stock
Set of 4 float bowl gaskets for Mikuni Smooth Bore 29MM Carburetors. P/N: G-29MM Applications:- Z1 900
- KZ 1000
- Anything running a Mikuni Smooth Bore Carburetor
-
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 13058-044 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000 A, B, C, G1
-
New Old Stock Genuine Kawasaki P/N: 92081-107 Applications:- Z1 900
- 77-78 KZ1000
- May fit others
-
New Kawasaki Genuine Shim ~ New Old Stock Kawasaki P/N: 12037-015 Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B Ltd
- 77-80 Kz1000A
- 77-80 Kz1000B Ltd
- 78-81 Kz1000C Police
- 78 & 80 Kz1000D Z1R
- 79-80 Kz1000E Shaft
- 1980 Kz1000-G1 Classic
- 81-83 Kz1000J
- 81-82 Kz1000K Ltd
- 81-82 Kz1000M CSR
- 82-83 Kz1000R Eddie Lawson Replica
- 81-83 Kz1100A Shaft
- 81-82 Kz1100B GPz
- 82-83 Kz1100D Spectre
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 92075-194 8.3T ID 36mm Applications:- KZ900
- Z1 900
- Early KZ1000
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 92075-193 7.3T ID 36mm Applications:- KZ900
- Z1 900
- Early KZ1000
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 92075-192 6.3T ID 36mm Applications:- KZ900
- Z1 900
- Early KZ1000
-
Contains all the necessary components to completely rebuild the front master cylinder. This kit is sourced directly from the OEM manufactures. Distributed by K&L Supply. Replaces Kawasaki P/N: 43073-001 Our P/N 32-8048 Kit Includes:- Piston Assy
- Return Spring Assy
- Check Valve Assy
- Primary Cup
- Circlip (18mm)
- Piston Stopper
- Boot
- Boot Stopper
- Z1 900 73 - 75
- H2 750 2-Stroke 72 - 75
- Kz900A 76 - 77
- H1 500 2-Stroke 73 -75
- KZ1000A 1977
- H1B 500 1972
- KH500-A8 2-Stroke 1976
- KZ400A 77 - 78
- S3 400 2-Stroke 74 - 75
- KZ650B 77 - 79
- S2 350 2-Stroke 72 - 73
- KZ750B 76 - 79
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23066-005 Sold as set of 2 Applications:- 73-75 Z1 900
- 73-75 H1 500
- 1976 KH500-A8
- 74-75 S3
- 76-78 KH400
- 1973 S2 350
- 73-75 S1
- 1974 KH250-A5
-
Out of stock
Legs are polished to a natural brushed finish with clear coat. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900