- 73-75 Z1
- 76-77 KZ900
- 80 KZ1000G
- 78 & 80 Z1R
- 77-80 KZ1000
- KZ650
- Will work on others
-
Quality set of 8 Clutch Plates Made in United Kingdom EBC P/N: CK4409 Replaces OEM P/N: 13088-030 Applications: -
Out of stock
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13161-029 Applications:- 76-77 KZ900
- KZ900 LTD
- KZ900 Police
- 73-75 Z1900
- 78+80 Z1R
- 80 KZ1000G, Z1 Classic
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- Early KZ1000 Police
-
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 12055-002 Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 78+80 Z1R
- 79-80 KZ1000E
- 80 KZ1000G Z1 Classic
- 75-81 KzZ1000 Police
-
New Old Stock, includes: Kawasaki P/N: 92081-020 Spring P/N: 600A0600 Ball Applications:- Z1 900
- KZ900
- H1, H2
- KX420
- S3
- A7, A1
- KZ1000
- Many others
-
Quality reproduction part made in Japan Replaces Kawasaki P/N: 26002-031 Applications:- 76-77 KZ900A
- KZ900 Police
- 73-75 Z1 900
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- KZ1000 Police (early)
-
Kit includes:- (2) 92043-080
- (2) 550D2515
- 73-75 H1
- 73-75 Z1
- 78 Z1R
- 76-77 KZ900
- 77-79 KZ1000A
-
Quality Japanese manufactured part Our P/N: 10607 Replaces P/N: 12053-001 Superseded # 12053-019 Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 80 KZ1000G / Z1 Classic
- 78 and 80 Z1R
- KZ1000 Police up to 81
- 79-80 KZ1000E
-
Kit consists of:- 2) 46012-008 Holders, fresh powder coat (select finish)
- 4) 92007-002 Bolt
- 4) Washers
- 73-75 Z1 900
- 76-77 KZ 900
- 76 KZ 900 (LTD)
- 77-80 KZ 1000
- 77-80 KZ 1000 (LTD)
- 72-75 H1 500
- 69 H1 500 (MACH III)
- 72 H2 750 (MACH IV)
- 74-75 H2 750 (MACH IV)
- 73-75 F11
- 71-73 F6
- 71-75 F7
- 71-72 F8
- 72-75 F9
- Many others
-
We recommend changing out all of the petcocks on our restorations to the Pingel unit. Here we have the single-outlet, used because of the clearance with the side cover. The Z1 originally came with a 2-outlet petcock. We offer a Z1 fuel line kit for this unit, P/N:35-6311 -
This kit is made up of good quality parts, including Motion Pro fuel line. Because of the size of the Pingel fuel valve, we had to use the single outlet so that it would not interfere with the stock Z1 side cover. Quality parts for a quality fuel valve. Kit Contains:- (1) fuel line 2FT Motion Pro
- (6) 1/2" clips
- (2) 5/16" clip
- (1) T line
-
Out of stock
This is a set of four NGK spark plug covers for the 73-75 Kawasaki Z1 Comes as shown *Items taken out of packaging for photo purposes only Replaces Kawasaki P/N: 21130-020 & 21130-019 Our P/N: 35-8082 -
Out of stock
Legs are polished to a high gloss finish. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Out of stock
Kawasaki Genuine Part ~ Used Very nice cover. Very minimal chain marks. Has some marking on the inside as shown as well. Includes one each Used Kawasaki P/N:- 14024-007 Transmission Cover
- 92049-004 Seal
- 92050-048 Seal
- 92050-024 Seal (SS P/N: 92049-1506)
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-78 KZ1000 A
- 77-78 KZ1000 LTD
- 78 Z1R
- Early KZ1000 Police
- Early KZ900 Police
- Early Z1 Police
-
Contains 16115-013 Oil Plug and 92055-049 O-Ring Applications:- 73-75 Z1 900
- KZ 1000
- KZ 1300
- KZ 900
- and more
-
Left hand engine cover Contains Kawasaki P/N’s: 14031-053 Cover 14045-014 Gasket (New) OEM polished dyno cover, correct for Z1 / KZ 900 Will fit up to 1978 KZ 1000