- 1972-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- May fit others
-
Bearings to fit rear brake hub and sprocket carrier. Kit P/N: 0215-0830 Replaces Kawasaki P/N's: 1) 601B6304Z Bearing 1) 601B6304 Bearing 1) 601B6206 Bearing 1) 92050-027 Seal Applications: -
Kit comes with three seals, as shown. Choose according to your model. Kit contains:- (2) 601B6203 bearings
- (1) 92050-003 seal
- Z1 900
- H2 750
- H1 500
-
Replaces Kawasaki P/N: 16099-002 Applications:- 73-75 Z1 900
- 76-77 KZ 900
- 77-81 KZ 1000
-
3 separate gaskets. Copper gaskets are .010 thick, with cylinder sleeve holes measuring 3.5". The mylar gasket has 3.25" holes. These may not go together. All 3 gaskets sold as a single item. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
-
Out of stock
Highest Quality Replacement Part Made in Japan. This is the label that goes on the tray inside the Z1 tail section. This label features the wiring diagram, valve clearance, point gap and engine capacity. Application:- 1973-75 Z1 900
Item is eligible for free domestic shipping.
-
Quality reproduction labels for the Z1 Kit includes:- Tire and load data sticker
- Drive chain information sticker
- Engine oil sticker
- Z1 Warranty chain replacement sticker
- 2) Helmet hook stickers
-
Left Engine Cover Stater Replacement Grommet Applications:- 73-75 Z1 900
- 78 & 80 Z1R
- 76-77 KZ 900A
- 76 KZ 900 LTD
- 77-80 KZ 1000 LTD
- KZ 1000G Z1 Classic
-
Quality Japanese Made Part for Kawasaki Our P/N: 10378 Application:- 73-75 Z1 900
-
Sale!
This is a genuine Kawasaki Head Gasket for Z1 New Old Stock Kawasaki P/N: 11004-052 Application:- 1973 Z1 900
-
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
Quality Reproduction Gasket, Made in U.S.A. OEM Kawasaki P/N: 11009-030 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
-
Doremi P/N: 11174 Replaces Kawasaki P/N: 11012-030Item is eligible for free domestic shipping.
-
Quality reproduction part which replaces oil pressure sending unit boot, which Kawasaki does not offer separately. P/N: 11013 Applications:- 73-75 Z1 900
- 1976-77 KZ900
- 1977-78 KZ1000
- May fit others
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Out of stock
Genuine Kawasaki - Used Polished, very nice kit. Kawasaki P/N's: 11022-005-2H Cylinder Head Cover Replaces 92003-092 Cam Cover Bolt Set Replaces 11023-006 Gasket Applications:- 73-75 Z1 900
- 76-77 KZ900
- Will work on 77-78 KZ1000
-
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
Quality Aftermarket Gasket Replaces Kawasaki P/N: 11023-006 Applications:- Z1 900
- KZ900 All
- 1977-1978 KZ1000 All
-
Out of stock
Quality re-manufactured stator coil wiring harness Applications:- 73-75 Z1 900
- 78 & 80 Z1R
- 76-77 KZ 900A
- 76 KZ 900 LTD
- 77-80 KZ 1000 LTD
- KZ 1000G Z1 Classic
-
ONE YEAR WARRANTY American Made Bolt Kit Kit consists of:- (13) 110B0625
- (3) 110B0635
- (1) 110B0650
- 1973-1975 Z1
- 1977-1980 KZ1000
- 1976-1977 KZ900A
- May fit Others
-
Quality replacement part. Replaces Kawasaki P/N: 110B0816 Our Part # 10561 Consists of:- (4) 110B0816 bolt
- (4) 461F0800 spring washer
- Z1900
- KZ900
- H2 750
- Early KZ1000
- May fit others
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Quality reproduction part Manufacturer P/N: 11103 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-78 KZ1000
- May fit others
-
Quality reproduction parts. Kit contains all bolts and spacers to mount the engine. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000 LTD
- 78+80 Z1R
- 77-80 KZ1000A
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Out of stock
Genuine Replated Kawasaki Part Head: Plain with stamped dot Kawasaki P/N: 113B1256A Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 80 KZ1000G Classic
- 79-80 KZ1000 Shaft
- Z1R
- 77-80 KZ1000
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Out of stock
Quality re-plated original part. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-1265 Applications:
- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Kit contains: 2) 113N1035, 2) 461F1000 Part Number: 113N1035 Application:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B
- 72-75 H2 750
- 69-75 H1 500
- 1976 KH500-A8
- 78-80 KZ1000D Z1R
- 77-80 KZ1000A
- Many others
-
QUALITY USA MADE Replaces Kawasaki P/N: 114B1025 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000C POLICE
- 80 KZ1000 G CLASSIC
- 72-75 F9
- 73-75 F11
- 70 F5
- 71 F81M
- 72 F8
Item is eligible for free domestic shipping.
-
Quality Reproduction Made in Japan Replaces Kawasaki P/N: 12004-012 Applications:- 73-75 Z1 900
- 73-75 Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police
Item is eligible for free domestic shipping.