FacebookYouTube
Call Us Today! 330-335-7365|info@johnnysvintagemotorcycle.com
  • Out of stock

    44005-045, 44006-043 Kawasaki Z1 900 Polished Lower Fork Legs-Tubes


    $525.00
    Legs are polished to a high gloss finish. Consists of:
    • 1) 44005-045 Left Hand Outer Tube
    • 1) 44006-043 Right Hand Outer Tube
    • 2) 44009-014 Fork Seals
    • 2) 44043-044 Washer NOS
    • 2) 44044-012 Circlip NOS
    • 2) 44010-018 Dust Shield
    • 2) 28012-009 Reflector (used)
    • 2) 92094-011 Reflector Rubber (used)
    • 2) 220B0408A Screw NOS
    • 2) 44045-002 Fork Drain Gasket NOS
    Application:
    • 73-75 Z1 900
    Details
  • Out of stock

    44005-045, 44006-043 Kawasaki Z1 900 Natural Finish Lower Fork Legs-Tubes with Clear Coat

    $525.00
    Legs are polished to a natural brushed finish with clear coat. Consists of:
    • 1) 44005-045 Left Hand Outer Tube
    • 1) 44006-043 Right Hand Outer Tube
    • 2) 44009-014 Fork Seals
    • 2) 44043-044 Washer NOS
    • 2) 44044-012 Circlip NOS
    • 2) 44010-018 Dust Shield
    • 2) 28012-009 Reflector (used)
    • 2) 92094-011 Reflector Rubber (used)
    • 2) 220B0408A Screw NOS
    • 2) 44045-002 Fork Drain Gasket NOS
    Application:
    • 73-75 Z1 900
    Details
  • Out of stock

    11011-065 Kawasaki KZ1000A Air Box Complete KZ1000 LTD

    $525.00
    OEM Kawasaki P/N: 11011-065 Includes P/N:
    • 11013-063 Element, air cleaner
    • 11012075 Cap, air cleaner
    • 11011065 Body, air cleaner
    • 11016009 Silencer
    • 92059-124 Tube drain
    • 11015-050 Inlet pipe LH outside
    • 11015-051 LH inside and RH inside (2) pipe
    • 11015-053 RH outside pipe
    • More
    Applications:
    • 77-78 KZ1000A
    • 77-78 KZ1000 LTD
    location: farm
    Details

  • 44006-039, 44005-041 Kawasaki H2, H1 Natural Finish Fork Tube Assembly Left Right

    $550.00
    Legs are polished to a natural brushed finish. Consists of:
    • 2) 44013-032 New fork tubes
    • 1) 44006-039 Right Hand Outer Tube
    • 1) 44005-041 Left Hand Outer Tube
    • 2) 44062-003 Polished Top bolt
    • 2) 44009-014 New fork seal
    • 1) 220B0408A Fork drain kit
    • 2) 44010-018 Fork dust seals
    Applications:
    • 72-75 H2 750
    • 73-75 H1
    • 72 H1B
    location: farm
    Add to cart Details
  • Out of stock

    44006-039, 44005-041 Kawasaki H2, H1 HIGH GLOSS Fork Tube Assembly Left Right

    $550.00
    Legs are polished to a nice gloss finish. Consists of:
    • 2) 44013-032 New fork tubes
    • 1) 44006-039 Right Hand Outer Tube
    • 1) 44005-041 Left Hand Outer Tube
    • 2) 44062-003 Polished Top bolt
    • 2) 44009-014 New fork seal
    • 1) 220B0408A Fork drain kit
    • 2) 44010-018 Fork dust seals
    Applications:
    • 72-75 H2 750
    • 73-75 H1
    • 72 H1B
    location: farm
    Details
  • Out of stock

    41074-047 Rebuilt Kawasaki KZ900 Front Wheel KZ1000A

    $550.00
    Wheel consists of:
    • Brand new DID Rim
    • Buchanan Stainless Spokes and Nipples
    • Polished Hub
    • New Bearing and Seal
    Applications:
    • 77-78 KZ1000A
    • 76-77 KZ900A
    • 76 KH500
    • 77-79 KZ750B
    • 70's KZ650
    • May fit others
    Details

  • 41074-047 Rebuilt Kawasaki KZ900 Front Wheel KZ1000A

    $550.00
    Wheel consists of:
    • Brand new DID Rim
    • Buchanan Stainless Spokes and Nipples
    • Hub
    • New Bearing and Seal
    Applications:
    • 77-78 KZ1000A
    • 76-77 KZ900A
    • 76 KH500
    • 77-79 KZ750B
    • 70's KZ650
    • May fit others
    Add to cart Details
  • Out of stock

    H2, Z1, KZ Rear Wheel 18” Rebuilt Stainless Spokes

    $600.00
    Stainless Spokes. New D.I.D. rim. Application:
    • Late 73-75 H2 750
    • 73-75 Z1 900
    • 76-77 KZ 900
    Details

  • 1986 Kawasaki KZ1000 Police Special

    $600.00
    We are parting out this bike. Good brakes Please call or email with your needs.
    Add to cart Details

  • 1982 Kawasaki KZ1100 Spectre

    $600.00
    Chassis with title. Will sell whole or part it out. Stock# 2961
    Add to cart Details

  • 41074-022 Kawasaki Z1 900 Rebuilt Front Wheel H1 H2

    $600.00
    • Powder Coated Hub
    • Buchanan Stainless Steel Spokes and Nipples
    • New Bearings
    • New DID Rim
    • New Rim Band
    Kawasaki P/N: 41074-022 Applications: 
    • 1973-1975 Z1 900
    • 1972-1975 H1 500
    • 1972-1975 H2 750
    Add to cart Details

  • 42048-021 Kawasaki H1 500 Rebuilt Rear Wheel

    $600.00
    • OEM Spokes and Nipples
    • New Bearings
    • New DID Rim
    • New Rim Band
    Kawasaki P/N: 42048-021 OEM Spokes P/N: 41027-012 41028-013 Applications: 
    • 1969-1975 H1 500
    Add to cart Details
  • Out of stock

    42048-023 Rebuilt Kawasaki Z1 Rear Wheel

    $650.00
    Rebuilt using quality parts Kawasaki P/N: 42048-023 DID rim 2.15 x 18 New spokes New bearings Applications:
    • 73-75 Z1 900
    • 76-77 KZ900A
    • Late 73-75 H2 750
    Sold as shown
    Details

  • 42048-023 Rebuilt Kawasaki Z1 900 H2 750 KZ900A Rear Wheel 16″

    $650.00
    Rebuilt using quality parts Kawasaki P/N: 42048-023 Rebuilt polished hub Buchanon stainless steel nipples and spokes New bearings Metal side valve tube-type rim Applications:
    • 73-75 Z1 900
    • 76-77 KZ900A
    • Late 73-75 H2 750
    Sold as shown
    Add to cart Details
  • Out of stock

    42048-023 Rebuilt Kawasaki Z1 900 H2 750 KZ900A Rear Wheel 18″

    $725.00
    Rebuilt using quality parts Kawasaki P/N: 42048-023 Rebuilt polished hub Buchanon stainless steel nipples and spokes New bearings Metal side valve tube-type rim Applications:
    • 73-75 Z1 900
    • 76-77 KZ900A
    • Late 73-75 H2 750
    Sold as shown
    Details

  • 1982 Kawasaki KZ1100D Spectre with Title – Motor Stuck

    $750.00
    VIN# JKAKZBD12CA003038 ENG#: KZT10AE014583 We are selling this bike with title, as-is, or parting out. Motor is stuck. No tank, no side covers, hole in bottom of headers. Seat pan rusty. No broken fins. Could be a good donor. Many good parts here. Coils, electrics, shock boots. Selling as-is or parting out. Good title, frame is straight.
    Add to cart Details

  • 42048-021 NOS 1975 Kawasaki H1 500 Rebuilt Rear Wheel

    $800.00
    • NOS OEM Spokes and Nipples
    • New Sealed Bearings
    • NOS Date Coded 1975 Takasago Rim 305
    • Hub vapor blasted and polished
    Kawasaki P/N: 42048-021 OEM Spokes P/N: 41027-012 41028-013 Applications: 
    • 1975 H1 500
    • Will work on 69-75 or KH500, but is correct for 1975 H1
    Add to cart Details

  • K1015 Kawasaki Z1 900 KZ1000 1015 Piston Kit

    $852.84
    P/N: K1015 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:
    • 4 Pistons
    • 4 Ring sets
    • 4 Piston pins
    • 8 Circlips
    • Base gasket
    • Head gasket
    Applications:
    • Z1 900
    • KZ1000
    Add to cart Details
  • Out of stock

    44005-045 OEM Kawasaki Z1 900 Rebuilt Fork Assembly 73-75

    $1,000.00
    Nice Rebuilt Fork Assembly Consists of:
    • 44005-045 LH Outer Tube
    • 44006-043 RH Outer Tube
    • 2) 44013-037 Fork Tube
    • 2) 44062-003 Fork Top Bolts
    • 2) 44010-018 Dust Shield
    • And More
    These are stamped 8C and 8D Applications:
    • 73-75 Z1 900
    Please see video for more information!
    Details

  • 1982 Kawasaki KZ1000J Motor 2164 27,000 Miles

    $1,000.00
    Motor# KZT000JE032164 Parting out an 82 KZ1000J, offering this motor separately. No title. 27,000 miles. Charging system works, Good rotor, selling without the carbs. Motor, ignition, starter included. The bike has been sitting for years, but inside the motor was well preserved, as shown. No broken fins. No damage. Clutch not frozen up. Ignition was replaced, new clutch gasket, transmission is good. No smoke, no oil leaks. Sold as-is. Will ship dry. Watch video below to see it run. Applications:
    • KZ1000J
    • KZ1000 CSR
    • KZ1000 LTD
    • KZ1000 Police
    128 lbs, 24" x 22" x 22" (without crate) Possible low-cost shipping upon request. location: 188
    Add to cart Details
  • Out of stock

    11005-136-2H Kawasaki Z1 900 KZ900 Cylinder Kit First-over

    $1,100.00
    Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:
    • 11005-136-2H OEM cylinder (1)
    • 13029-058 Piston 0.50 (4)
    • 13025-046 Ring (4)
    • 13002-022 Pin (4)
    • 92036-021 Clip (8)
    Applications:
    • 74-75 Z1 900
    • 76-77 KZ900A
    • 76 Z1 900 LTD
    Details
  • Out of stock

    127-61001 Kawasaki Z1 900 Kerker 4-Into-1 Exhaust BLACK

    $1,178.95
    Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:
    • 73-75 Z1 900
    • 76-77 KZ900A
    • 76 KZ900B LTD
    • 77-80 KZ1000A
    • 77-80 KZ1000B LTD
    Details

  • 82 Kawasaki GPZ1100 Project Bike / Basket Case

    $1,200.00
    FRAME# JKAKZBB14CAO12810 ENG# KZ8T10BE012738 Purchased this basket case GPZ along with a Kawasaki Z1. This came from an estate, and it came in boxes. The frame does not appear to be bent. The originals sticker is on the frame and we have a title with this bike. Crank feels okay, probably should be inspected. 18" rear wheel is complete with rotor and sprocket carrier. Rim is nice and straight, not bent. Rear inner fender is intact, with electrical connections. Side stand, 19" wheel is complete and rim is not bent. Cylinder head no broken fins but incomplete, only one cam cap and no cams. Exhaust studs look nice, fuel injection looks good, combustion chambers look good. Fuel injection unit, air box, (only one air box side over), we think the front sprocket cover is correct, brake parts, extra caliper, tail light, handlebars, (one may be bent), mirror, fuel sending unit, gauge, sprocket, ignition switch with key, clutch push rod (bent). See video for details. Sold as shown. Low cost shipping available. FRAME HAS BEEN SOLD, ALONG WITH SWING ARM
    Add to cart Details

  • 1985 ZN1100 Kawasaki LTD with Title, Will Separate

    $1,200.00
    Frame # JKAZNBB14FB502477 Eng # KZT10AE024423 We are parting this bike out. It has a couple of issues; under the head by the cam cover has a small crack, as shown. The carbs are off of a KZ1000 J. Exhaust is different, not stock and has no baffle. Brakes in front not bad; rear brakes are locking up. No broken fins. We will separate. Bike has a title. Due to our Ohio weather, it has not been test ridden. New oil, filter, spark plugs. Will run as shown in video. Charging system does not work. Has a lot of good parts, or you can buy this and fix it up. Please call us if interested. 330-335-7365
    Add to cart Details

  • K1075 Kawasaki Z1 900 KZ1000 1075 Piston Kit

    $1,267.71
    P/N: K1075 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:
    • 4 Cylinder sleeves
    • 4 Pistons
    • 4 Ring sets
    • 4 Piston pins
    • 8 Circlips
    • Base gasket
    • Head gasket
    Applications:
    • Z1 900
    • KZ1000
    Add to cart Details
  • Out of stock

    41074-022 NOS Kawasaki Z1 900 Front Wheel H2 H1 Takasago

    $1,400.00
    Kawasaki P/N: 41074-022 This rebuilt OEM wheel is in great shape! Wheel is stamped: Takasago 185 X 19 4F  303 Applications:
    • Z1 900
    • ALL H2 750
    • 72-75 H1 500
    Details

  • 35-1 Kawasaki KZ1000 Wiseco Cylinder Kit

    $1,400.00
    This kit is for 77-80 KZ1000A, but will also work on Z1R, KZ1000A LTD or Z1 900. Cylinder head has been fitted with brand new cylinder sleeves from Wiseco. Includes 1015 Kit from Wiseco, piston 1-4, all marked, pistons, rings, pins, and clips, as well as gaskets. This is a bolt-on kit, ready to go. No broken fins on the cylinder. Applications:
    • 77-80 KZ1000A
    • Z1R KZ1000A LTD
    • Z1 900.
    Add to cart Details

  • 11005-136-2H KIT Kawasaki Z1 900 Wiseco® 1015 Kit with Cylinder

    $1,500.00
    This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:
    • 74-75 Z1 900
    • 76-77 KZ900A
    • 76 KZ900B LTD
    Add to cart Details
  • Out of stock

    1973-1976 Kawasaki Z1 900 / KZ900 Exhaust System

    $1,500.00
    Quality reproduction exhaust system P/N:  OSVP059 Applications:
    • 73-75 Z1 900
    • 76 KZ900
    Details
  • Out of stock

    Kawasaki KZ1000 Wiseco® 1075 Kit with Cylinder

    $1,500.00
    This is a ready-to-go bolt-on kit, complete with Wiseco 1075 kit. Freshly-bored cylinder. No broken fins. This is the same setup we use on our restorations. Applications:
    • 76-77 KZ900
    • 77-80 KZ1000
    • 73-75 Z1 900
    Details

  • 11006-013 1973-Only Kawasaki Z1 Cylinder Kit

    $1,500.00
    Genuine Kawasaki Z1 900 903 cylinder has been heat-treated powder coated. Comes with complete 1015 kit from Wiseco. This year does not take the center O-ring that the 74-75 take. Each piston is marked their respective cylinders. No 2 pistons are alike. 70mm. We use these kits on all of our restorations. *Optional enhancement, if you would like we can file the black from the edges of the fins to appear as the originals came.
    Add to cart Details

  • 1015 Kit

    $1,500.00
    Comes with complete 1015 kit from Wiseco. We use these kits on all of our restorations.  
    Add to cart Details

johnnys-vintage-motorcycle-footer

1280 High Street
P.O. Box 508
Wadsworth, OH 44282
Phone: 330.335-7365
Email: info@johnnysvintagemotorcycle.com
Web: Johnnysvintagemotorcycle.com

Select category above. Products will load at top of page.

© Copyright    |   Johnny's Vintage Motorcycle Company   |   All Rights Reserved   |   website designed by DigitalHipster Inc.

Go to Top