- 72 H1B
- 73-75 H1
- 76 KH500
-
Used, Satin Polish Kawasaki P/N: 14030-036-80 Applications: -
Kawasaki P/N: 99920-1171-01 Condition: Used Pages are all nice clear and legible, some pages have dirt/marks, but they do not interfere with the information. This manual appears to have come in contact with fluid along the bottom but none of the pages are stuck together. Binding and cover intact. Cover is showing wear from storage/handling. As we have more than one copy of this manual, you may not receive the one pictured, but they are all in similar condition. Pages: 55 Print Date: August 1981 Models covered:- 1982 KX80 C2, D2
-
New Old Stock Genuine Kawasaki Kawasaki P/N's: (1) 21082-006 Points Replaces 310-9208 (1) 21013-012 Condenser Replaces 310-9209 Our P/N: 21082-006 KIT Applications:- B8
- B8S
- B8T
- F1
- F1TR
- F2
- F2TR
- F3
-
Quality reproduction parts. Our P/N: 92075-149-KIT Kit includes:- 92075-149 Rubber (2)
- 92027-165 Collar (2)
- 92027-156 Collar (2)
- 92075-161 Damper (2)
- 92075-141 Rubber (1)
- 92075-146 Rubber (2)
- 73-75 Z1 900
- May fit others
-
Quality reproduction part. Replaces Kawasaki P/N: 27003-046 Applications:- 73-75 Z1 900
-
Quality reproduction parts. Kit includes the following OEM P/N's:- 92075-120 (2)
- 92075-119 (2)
- 73-75 Z1 900
- 76-77 KZ900
- 76 KZ900B LTD
-
Quality reproduction part replaces OEM Kawasaki P/N: 43005-021 Applications:- 73-75 Z1 900
- 76-77 KZ900
-
Quality re-plated parts. OEM P/N: 92003-015 Set of 6 Applications:- 1974-75 Z1 900
- 1973-75 H1 500
- 76 KH500
- May fit others
-
Quality reproduction part which replaces oil pressure sending unit boot, which Kawasaki does not offer separately. P/N: 11013 Applications:- 73-75 Z1 900
- 1976-77 KZ900
- 1977-78 KZ1000
- May fit others
-
Quality reproduction part, replaces Kawasaki P/N: 25023-015 Superseded P/N: 25023-1006 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- 1977-1980 KZ1000A
- 1976-1979 KZ750B
- Early KZ650
-
Comes with complete 1015 kit from Wiseco. We use these kits on all of our restorations. -
Motor# KZT000JE032164 Parting out an 82 KZ1000J, offering this motor separately. No title. 27,000 miles. Charging system works, Good rotor, selling without the carbs. Motor, ignition, starter included. The bike has been sitting for years, but inside the motor was well preserved, as shown. No broken fins. No damage. Clutch not frozen up. Ignition was replaced, new clutch gasket, transmission is good. No smoke, no oil leaks. Sold as-is. Will ship dry. Watch video below to see it run. Applications:- KZ1000J
- KZ1000 CSR
- KZ1000 LTD
- KZ1000 Police
-
We have removed the motor. Call with needs! 330-335-7365 -
Out of stock
Mini coil set 3 OHM Dual, set of 2. This is the part we use on our Z1 900 and KZ1000 73-78 restorations. Will work on others. We also have wires and lower units in stock. -
No broken tabs. Needs a little work at the emblem area, as shown. Applications:- 76 KZ900 LTD
- 76-77 KZ900A
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Out of stock
Quality Japanese Parts Made by Daiichi Our P/N: 21008-027 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-78 KZ1000A
- Others
-
TUNE UP KIT Z1 900 Futaba Breaker Point Assy Made in Japan Includes:- K-851
- 14-2011
- BR8ES Spark plugs
-
New Old Stock Genuine Kawasaki P/N: 92001-115 Applications:- 73-75 Z1 900
- 76 KZ900A
- Z1 R
- Battery Box on Z1 900
-
New Old Stock Genuine Kawasaki P/N: 21013-030 Applications:- 71-72 F8 250cc
- 73-75 F11 250cc
-
Reproduction parts. Standard size piston rings. Includes 2 pieces plus expander oil rings, sold per cylinder. Replaces OEM P/N: 13008-1001 Applications:- 77-80 KZ1000
-
Genuine Kawasaki New Old Stock P/N: 44013-015 Applications:- 66-71 A1, A1SS 250cc Samurai
- A7, A7SS 350cc Avenger
-
Genuine Kawasaki New Old Stock P/N: 13029-023 .020 Oversize, or .5 mm. oversize. Piston only. No rings included. Application:- 1966-71 A7, A7SS 350cc Avenger
-
Pingel P/N: 8210-T-AH Will positively stop fuel flow when turned off! Applications: 1972-78 small triples, including:- S1 250
- S2 350
- S3 400
- KH 250
- KH 400
-
Quality reproduction part from Doremi Collection of Japan. Replaces OEM P/N: 16054-005 Doremi P/N: 10127 Applications:- 73-75 Z1 900
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 26004-024 Applications:- 1974 KZ400
- 1975 KZ400D
- 1975 KZ400S
-
New Old Stock Genuine Kawasaki P/N: 43010-011 Application:- 1973 G4TR 100cc Trail Boss
-
This rim lock is compatible for a 2.50-3.oo" rim size. Uses...cafe racer, vintage drag race, vintage road race. Kawasaki P/N: 41025-053 Applications:- F81M
- F9
- many others
-
Kawasaki P/N: 25015-026 Meter has been tested and works. Has some fading on redline and some spots inside glass. Ring is nice and overall is a nice rider-quality piece. Applications:- 73 H1 500D
- 74 H1500E
- 75 H1500F
- 76 KH500
-
New Old Stock Genuine Kawasaki P/N: 25005-1067 Applications:- 1980 KZ1000G (Z1 Classic)
- KZ1000A (MKII)
- KZ1000B (LTD)
-
This came from a closed dealership. Unopened package. Not 100% sure of the application. **No returns** -
New Old Stock Genuine Kawasaki P/N: 42005-024 Rear wheel hub includes sprocket bolts and locking plates. Applications:- 71-72 F6 125cc
- 71-72 F7 175cc