- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Nice condition, Date coded 9L Kawasaki P/N: 41080-001 Applications: -
New Old Stock Genuine Kawasaki P/N: 21061-019 Applications:- 1975 Z1 900B (903)
-
Pingel P/N: 8210-T-AH Will positively stop fuel flow when turned off! Applications: 1972-78 small triples, including:- S1 250
- S2 350
- S3 400
- KH 250
- KH 400
-
These are the petcocks we use on all of our special project bikes. Replaces Kawasaki P/N: 51023-040 Kit includes: (1) 8210-T-AH Petcock (1) A2002C Adapter 24mm Applications:- H2 750
- H1 500
- KH 500
-
Out of stock
This is a quality reproduction seat. Replaces Kawasaki P/N: 53001-076 Will fit other models with proper seat catch, but the stay bar will be in a different position. Applications:- 73-75 Z1 900
-
Our P/N:DC1-1 This coil set is 3-OHM Great for use with electronic ignition. Wires available. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
- Will work on others
-
The DYNA S Electronic Ignition System was designed as a points replacement. Totally self-contained for easy installation. All components fit under the point cover, replacing the original points. It is designed for use with stock OEM, or other coils, or combinations of coils that have at least 3-ohms primary resistance. No more points to set! Our P/N DS2-1 Applications:- 73 - 75 Z1 900
- 76 - 77 Kz900
- 77 - 81 Kz1000
-
Out of stock
GENUINE KAWASAKI Nicely Polished Hub Notice no Rib in Webbing Kawasaki P/N: 42008-013 CORRECT FOR:- 1973 Z1 900
- 74-75 Z1 900
- 76-77 KZ900
-
These cases are in nice shape and we do not see any damage. Engine Number: KZT10BE024383 Sold as shown Local Pickup encouraged -
Out of stock
Kawasaki Genuine Part ~ New Old Stock This is a nice NOS lower triple clamp. There are some minor marks and shelf wear here and there. This would be a great choice for your favorite bike. Kawasaki P/N: 44037-024 Applications:- 1969 H1 (Mach III)
- 1972 H1-C
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
Out of stock
This is a very nice polished, early edition clutch cover. Has some minor scratches from shelf life. This would be a perfect addition for your favorite bike. It is lighter in weight than the late model cover. We believe this is for 73-76 because of the thinner ribs on the inside. Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 76 Kz900B LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 14032-082 cover (supersedes to 14032-121)
- 52015-004 oil gauge window
- 14046-024 gasket
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Out of stock
New bearing and seal Kawasaki P/N: 42008-010 Applications:- 1972-1975 H2 750
-
Out of stock
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13161-029 Applications:- 76-77 KZ900
- KZ900 LTD
- KZ900 Police
- 73-75 Z1900
- 78+80 Z1R
- 80 KZ1000G, Z1 Classic
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- Early KZ1000 Police
-
Freshly Powder Coated. Nice Genuine Parts. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Contains the following Kawasaki P/N's:- 34011-029 Stand OEM powder coated
- 34023-012 Spring
- 34019-014 Bolt
- 92016-044 Nut
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Out of stock
Quality, reconditioned polished part. Kawasaki P/N: 42006-062 Applications:- 76 KZ 900
-
Out of stock
OEM Kawasaki P/N: 33001-091 It is stamped 607. It only has one bearing on each side. Has been powder coated and is in nice shape. Sold as shown. Applications:- 77 KZ1000A
-
Out of stock
Genuine Kawasaki P/N: 42008-034 Nicely polished Includes P/N: 601B6206 Bearing 481J6200 Ring 92050-027 Seal Application:- 77-78 KZ1000A
-
Out of stock
Genuine Kawasaki Parts Kawasaki P/Ns:- 11016-006 Silencer (1)
- 220B0645 NOS Screws (2)
- 92027-149 NOS Collar (2)
- 92075-118 NOS Damper (2)
- 92022-125 NOS Washer (2)
- 72 H1B
- 73-75 H1
-
Out of stock
Quality replacement part. Replaces Kawasaki P/N: 41080-1020 Our P/N: MD4063 Applications:- 79-80 KZ1000 LTD
- 80 Z1 Classic
- 79 650 SR
- May fit others
-
OEM Kawasaki P/N: 41080-008 RE-conditioned rear brake rotor kit with bolts and lock washers. Kit Includes P/N's:- 41080-008 Rotor
- 92001-160 Bolt (4)
- 92088-023 Lock (2)
- 76-79 KZ750 B
- 77-78 KZ1000 LTD
- 77-79 KZ650 C
- 78 KZ650 D
-
The pan and foam are in great condition. Cover is brand new. Kawasaki P/N: 53001-106 Applications:- 74-75 KZ400
- Looks like it will fit 76-77, but not 100% sure. Please check first.
-
Kawasaki P/N: 51001-1009-7V We bead blasted this tank to make sure it was able to accept emblems, as shown. Inside is nice, as shown. Outside has imperfections, as shown. Please keep in mind that the 78 KZ1000A takes a fuel valve that is held on with 2 bolts. Using the proper valve, this tank will fit: Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77 KZ1000A
- (Correct for a 78 KZ1000A)
-
Frame #: H1F-26166 Frame appears to be in good shape, except for water damage on lower right leg as shown on front. Does not appear to be bent. No title. This is an oversized item - countries with postal restrictions, please contact us for a shipping quotes. Local pickup welcome. Possible low-cost shipping available upon request. -
Quality reproduction part Replaces OEM Kawasaki P/N: 44013-037 Set of 2 Fork Tubes Applications:- 76-77 KZ900A
- 76 KZ900 LTD
- 73-75 Z1 900
- 77 KZ1000 A
-
OEM Kawasaki P/N: 13031-1161 Superseded P/N: 13031-1332 This crankshaft came from an older inventory. Looks to be reconditioned. Applications:- 84-86 GPZ900
- ZX900
- 84-86 ZL900
-
Out of stock
These NOS stands came from an older inventory. There was some small damage from poor shelf life, so they have been freshly powder coated. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
New Old Stock Genuine Kawasaki P/N: 21003-1005 Applications:- 1977-1979 KZ650B
- 1977-1979 KZ650C
- 1978-1979 KZ650D SR
- 1980 KZ650-E1 LTD
- 1980 KZ650-F1
-
No broken tabs. Needs a little work at the emblem area, as shown. Applications:- 76 KZ900 LTD
- 76-77 KZ900A
-
New Old Stock Genuine Kawasaki P/N: 43001-1001 Applications:- 1977-78 KZ1000 B1, B2 LTD
-
Out of stock
Mini coil set 3 OHM Dual, set of 2. This is the part we use on our Z1 900 and KZ1000 73-78 restorations. Will work on others. We also have wires and lower units in stock. -
Quality replacement part. Replaces Kawasaki P/N: 41080-001 Our P/N: MD4069LS Applications:- 73-75 Z1 900
- 72-75 H2 750
- 72-75 H1 500
-
Out of stock
Genuine Kawasaki ~ Used Chrome is not 100% perfect, but this is a very nice part. Kawasaki P/N: 35032-040 Applications:- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- Will fit others
-
Out of stock
Freshly powder coated Genuine Kawasaki P/N: 44037-082 Includes: 92003-064 Bolts (2) 461F 1200 Washer (2) Applications:- 74-75 H2 750
- May fit others
-
Out of stock
NOS Kawasaki front spoke set, complete with nipples. Includes (20) 41028-084 (outer) and (20) 41027-085 (inner) Applications:- 76-77 KZ900A
- 77-78 KZ1000A
- 76-79 KZ750B
- 76 KH500A
- Will fit others
-
Out of stock
Quality, reconditioned polished part. Kawasaki P/N: 42006-030-80 Applications:- 73 Z1 900
-
We removed this seat from a 1979 KZ750 B Nice Seat! Looks to have had a repair at one time Applications:- Should fit 76-79 KZ750
-
Freshly powdercoated front hub Genuine Kawasaki P/N: 41034-021-21 Applications:- Z1 900
- H1 500
- H2 750
-
Quality reproduction part Replaces OEM Kawasaki P/N: 44013-032 Set of 2 Fork Tubes Applications:- 72 H1 500 B
- 73-75 H1 500
- 76 KH500
- 72-75 H2 750
-
Very nice front brake rotor, it is date coded 9A (1) Rotor 41080-001 (6) Replated Brake Rotor Bolts (3) 92088-014 Locks Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Very nice front brake rotor, it is date coded 0A (1) Rotor 41080-001 (6) Replated Brake Rotor Bolts (3) 92088-014 Locks Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Very nice front brake rotor, it is date coded 9F (1) Rotor 41080-001 (6) Replated Brake Rotor Bolts (3) 92088-014 Locks Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Out of stock
Nicely polished Front Sprocket Cover with Clutch Inspection Cover. Genuine Kawasaki, Used Kawasaki P/N: 14026-1017 Applications:- 1979-1980 KZ1000A MKII
- 1979-1980 KZ1000B LTD
- 1979-1981 KZ1000C Police
- 1980 KZ1000D Z1R
-
Out of stock
Genuine Kawasaki, Used We see no dents. There are some scratches, as shown. The scratches could be polished out if desired. Comes with original bracket and bolts. Great for the unrestored rider. Very nice part and very hard to find! Kawasaki P/N's: 35022-038 Fender Superseded P/N: 35022-045 35025-009 Bracket (2) 112G0612 Bolts Applications:- 1969-1971 H1 500
- 1972 H1 500C
-
We recommend Pingel Fuel Valves for every restoration we do. Kit made from quality reproduction parts. Replaces Kawasaki P/N: 51023-1006 Superseded P/N: 51023-1018 Our P/Ns: A1703C Adapter Plate, 3311-D-AH Fuel Valve Applications:- KZ1000 A2, A2A
- KZ1000 C1A, C2, C3
-
GENUINE KAWASAKI Nicely Polished Hub with new Seal and Bearing. Kawasaki P/N: 42008-013 Includes: 601B6206 Bearing, 92050-027 Seal APPLICATIONS:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900