- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications: -
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
This decal is for the left or right. Kawasaki P/N: 56050-1866 Applications:- 1993 EX500
-
Genuine Kawasaki ~ Used, Powder Coated Kawasaki P/N: 32105-006 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- KZ900 Police
-
Out of stock
Quality re-manufactured stator coil wiring harness Applications:- 73-75 Z1 900
- 78 & 80 Z1R
- 76-77 KZ 900A
- 76 KZ 900 LTD
- 77-80 KZ 1000 LTD
- KZ 1000G Z1 Classic
-
New Kawasaki Genuine Part, New Old Stock Kawasaki P/N: 54011-1262 Application:- 88-93 KX125
-
Genuine Kawasaki ~ Used, Replated Kawasaki P/N: 42032-037 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900
-
Comes with original box. Kawasaki P/N: 28001-030 Superseded P/N: 28001-020 Applications:- 1974-1975 H2 750
- 1973-1975 H1 500
- 1974-1975 S3 400
- 1974-1975 S1 250
-
Kawasaki P/N: 42037-023 Applications:- 1973-1975 Z1 900
- Z1 Police
- 1976-1977 KZ900A
- KZ900C2 Police
- 1972-1975 H2 72
-
Kawasaki P/N: 21049-008 Preceding Kawasaki P/N: 723131-8103 Applications:- C2SS
- C2TR
-
Out of stock
Notice the taper on the rib which is correct for 1977-1978 KZ1000 Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-100-80 Cover 14045-014 Gasket (New) Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000B LTD
- 1978 KZ1000C Police
- 1978 KZ1000D Z1R
- Will fit others
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-1056 Dyno Cover -Superseded P/N: 14031-1292 14045-014 Gasket (New) Applications:- 1981-1983 KZ1000J
- 1981-1982 KZ1000 CSR
- 1981-1982 KZ1000 LTD
- KZ1000 Police J Motor
- KZ1100A
- KZ1100-L1
- Will work on others
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14025-1244 Cover 11009-1220 Gasket NOS (2) 120P0635 Screws NOS Applications- 1981-1983 KZ1000J
- 1981-1982 KZ1000 LTD
- 1981-1982 KZ1000 CSR
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Out of stock
Complete Gasket Kit Includes the Following: 11004-048 (3) 11009-019 (3) 16062-011 (6) 18067-008 (3) 14046-014 Our P/N: VG-421 Applications:- 69-72 H1 500
-
Out of stock
Complete Gasket Kit Includes the Following: 11004-048 (3) 11009-019 (3) 18067-008 (3) 16062-011 (6) 14046-014, 14045-012, 14050-005, 16094-002 Our P/N: VG-431 Applications:- 73-75 H1 500
- 76 KH500
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 21156-007 Application:- 72 H1 500 B
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/Ns: Inner ~ 43050-003 (1) Outer ~ 43051-002 (1) Our P/N: 43050-003-SET Application 1975 KZ 400 -
Quality Reproduction Parts Includes Kawasaki P/N: 1) 92007-031 Bolt 1) 92022-230 Washer Our PN: 92007-031 Applications:- 73-75 Z1 900
- 76-77 KZ900 All
- 74-75 H2 750
- 78, 80 Z1R
- 73-75 H1
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 44045-049 This part is for the headlight mounting brackets to absorb vibration in order to prevent stress cracking and premature headlight failure. They fit below the brackets, over the fork upper tube. Some of the models listed use 4, some use 2. These are considered must have parts for proper headlight mounting. Sold as Shown. Applications:
- 1983 EX305 B1 (Gpz 305)
- 76-79 KE125 A3-A6
- 1974 KS125
- 1975 KS125 A
- 78-79 KZ200 A1-A2, A1A
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92073-016 Applications:- 1970 F5 BIGHORN
- 72-75 F9 350
- 71-75 F7 175
- 76-79 KD175A
- 76-78 KE175B
-
Carburetor Holder Set - Left & Right Quality Made Reproduction Part Replaces Kawasaki P/N's: (2) 16065-028 Right (2) 16065-029 Left (4) 92068-006 Rubber Plug Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900 All
- 1977-1980 KZ1000 All
-
Out of stock
Big dent on the left side, as shown. Shelf wear and scratches, as shown. Poor storage, as shown, on right side. Inside of the tank looks decent. Kawasaki P/N: 51001-109-3P Applications:
- 1976 KZ400
-
All pages are nice, clear and legible; showing some discoloration due to age. Page edges are showing wear/dirt from use handling and storage. Cover/Binding are in place showing some wear/dirt from use, handling and storage. Print Date: June 1975 Kawasaki P/N: 99997-715 -
Quality Reproduction Grab Rail with Hardware Kawasaki P/N: 35032-022 (10276) Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
-
Out of stock
Kawasaki P/N: 16087-002 Applications:- A1 250
- A1SS 250
- A7 350
- A7SS 350
- F3 175 Bushwacker
- F4 250 Sidewinder
-
Out of stock
Quality Reproduction Part Replaces Kawasaki P/N: 92064-035 Applications:- Early Z1 900
- May work on others
-
Kawasaki P/N's: 44006-1090 Right 44005-1090 Left Applications:- 1982-1983 KZ750 Spectre
-
Bearings to fit rear brake hub and sprocket carrier. Kit P/N: 0215-0830 Replaces Kawasaki P/N's: 1) 601B6304Z Bearing 1) 601B6304 Bearing 1) 601B6206 Bearing 1) 92050-027 Seal Applications:- 1972-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- May fit others
-
- Powder Coated Hub
- Buchanan Stainless Steel Spokes and Nipples
- New Bearings
- New DID Rim
- New Rim Band
- 1973-1975 Z1 900
- 1972-1975 H1 500
- 1972-1975 H2 750
-
Out of stock
Some shelf wear, as shown. We are not 100% sure on the part number but we believe it to be: Kawasaki P/N: 44034-069 Applications:- 1974-1975 H1 500
- May also fit 1974-1975 H2 750
-
Out of stock
Set of 2 Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23019-022 Applications below -
Out of stock
Sold as a set of 8 Kawasaki P/N: 92049-1153 Applications:- 1980-1983 KZ550 A1-A4
- 1980-1983 C1 (LTD)
- 1981 KZ550 D1 (GPz)
- 1983 KZ550 F1 (Spectre)
- 1984 KZ550 F2 (LTD Shaft)
- 1982-1983 H1-H2 (GPz)
- 1983 KZ550 M1 (LTD Shaft)
- 1983-1990 ZR550 B1-B4 (Zephyr)
- 1984-1986 ZX550 A1-A3 (GPz)
-
Headlamp Bracket Right Side Kawasaki Genuine Part ~ New Old Stock Has some scuffs as shown from storage Kawasaki P/N: 44034-040-21 Application:- 72-73 H2 750
-
All pages are nice, clear and legible. Page edges are showing wear/dirt from use, handling and storage. Cover and binding in place showing wear/dirt from use, handling and storage. Print Date: August 1, 1990 Kawasaki P/N: 99924-1144-01 Models Covered:- 1991 KX80-R1, S1, T1, V1
- 1991 KX100-B1
-
Out of stock
Handlebars are set up for internal wires. Chrome is pretty nice, has a few marks on the bottom. Genuine Kawasaki ~ Used Kawasaki P/N: 46003-1002 Applications:- 1977-1978 KZ1000 LTD
-
Kawasaki P/N: 671B2565 Applications:- KZ1000 LTD
- KZ650 Custom
-
Made in Japan 219Hx122 Replaces Kawasaki P/N: 21070-003 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1977-1978 KZ1000 Police
- 1978 Z1R
-
Quality Made Reproduction Replaces Kawasaki P/N: 11060-1074 Superseded Kawasaki P/N: 16112-002 Applications:- 1973-1975 Z1
- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 77-80 KZ1000
- 1978 & 1980 Z1R
- KZ1000 Police
- KZ1000J
- GPz1100
-
Out of stock
Kawasaki P/N: 92022-248 -
Kawasaki P/N: 14046-030 Applications:- 1975-1976 KT250
- 1974-1979 KX250
-
Kawasaki P/N: 46060-010 Applications:- 1974-1976 KX125
- 1974-1976 KX250
- 1975-1976 KX400
- 1974 KX450
-
This shock suffers from poor storage and needs a little paint. Kawasaki P/N: 45014-1003 Applications:- 1978-1979 KZ400B
- 1978 KZ400 C1
- 1980-1981 KZ440
- May work on others
-
Genuine Kawasaki~Used One very small ding on top surface as shown. Minor surface scuffs as shown. Kawasaki P/N: 35004-1012 Applications:- 1977-1980 KZ1000 LTD
-
Genuine Kawasaki ~ Used, Reconditioned Kawasaki P/N: 92091-011 Superseded P/N: 92091-024 Applications:- 1969-1972 H1 500
-
Kawasaki P/N: 92081-076 Applications:- KX80
- KDX200
- Early KX125
- KZ1300
- KX500
- ZX750
- KDX250
- and many more
-
Kawasaki P/N: 23019-023 Applications:- 73-75 H1 500 D, E, F
- 1982 KZ250 L1 (CSR BELT)
- 1972 H2 750 Mach IV
- 1983 KZ250 W1 (LTD BELT)
- 74-75 H2 750 B, C Mach IV
- 81-82 KZ305 A1-A2 (CSR)
- 1976 KH250 A5
- 1982 KZ305 B1 (CSR BELT)
- 76-78 KH400 A3-A5
- 87-88 KZ305 B2-B3
- 1976 KH500 A8
- 81-83 KZ440 A2-A3,B2,D2-D5,G1
- 77-80 KZ1000 A1-A4, A2A, A3A
- 80-83 KZ550 C1 -C4,D1,H1-H2
- 77-80 KZ1000 B1-B4 LTD
- 77-79 KZ650 B1-B3, B2A
- 1978 KZ1000 C1, C1A Police
- 77-79 KZ650 C1-C3 Custom
- 79-80 KZ1000 E1-E2 Shaft
- 78-79 KZ650 D1-D2, D1A SR
- 1980 KZ1000 G1 Classic
- 1980 KZ650 E1 LTD
- 81-83 KZ1000 J1-J3
- 1980 KZ650 F1
- 81-82 KZ1000 K1-K2 (LTD)
- 81-83 KZ650 H1-H3 (CSR)
- 81-82 KZ1000 M1-M2 (CSR)
- 1984 KZ700 A1
- 82-83 KZ1000 R1-R2 Eddie Lawson Replica
- 76-82 KZ750 B1-B4,E1-E3,G1,H1-H3,L3,M1,N1-N2,R1
- 81-82 KZ1100 A1-A2 (SHAFT)
- 76-77 KZ900 A4-A5,B1
- 81-82 KZ1100 B1-B2 (GPz)
- 73-75 S1 A, B, C Mach I
- 1982 KZ1100 D1 (SPECTRE)
- 72-73 S2 A Mach II
- 79-82 KZ1300 A1-A4
- 74-75 S3 A Mach II
- 1980 KZ1300 B2
- 73-75 Z1 900 A, B
- 78-79 KZ200 A1-A2
- 83-84 ZX1100 A
- 80-81 KZ250 D1-D2
- 83-85 ZX650 A,E