- 1980 KZ1000G (Z1 Classic)
- KZ1000A (MKII)
- KZ1000B (LTD)
-
New Old Stock Genuine Kawasaki P/N: 25005-1067 Applications: -
Replaces Kawasaki P/N: 43015-033 Doremi P/N: 75-502 Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD KZ1000B
- 1978 KZ1000 Police C1, C1A
-
Out of stock
Replaces Kawasaki P/N: 43015-1047 Doremi P/N: 75-505 Applications:- 1980 KZ1000 MKII
- 1980 KZ1000D Z1R
-
Replaces Kawasaki P/N: 43015-1016 Doremi P/N: 75-504 Applications:- 1979 KZ1000 MKII A3A
- 1979 KZ1000 Police C2
- May work on others
-
Out of stock
Genuine Kawasaki ~ Used Kawasaki P/N's: 44039-1005 Upper 44037-1008 Lower 46012-008 Handlebar Holder 92007-002 Bolt Set 461F0800 Washers (in set) -
Out of stock
Fork outer tubes have been brush polished. Set includes:- 44005-063 LH Outer Tube
- 44006-061 RH Outer Tube
- 44009-024 Fork Seals
- 44010-032 Dust Shields
- 220B0408A Screws
- 44045-002 Seals
- 76-77 KZ900A
- 76 KH500
- 77 KZ1000A
- 76 KZ900 LTD
- May fit others
-
Out of stock
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23003-013 Application:- 1972 H2 750
-
No title. 2141 miles. This bike was hit from behind. Missing many parts. Carbs missing many parts. WILL SEPARATE! Possible low cost shipping on request. -
This wheel assembly is great for unrestored every day rider. Rim has some marks and a few rust spots, otherwise very nice. OEM Kawasaki P/N: 42048-041 Consists of:- 41025-058 Genuine Takasago 2.5 x 18 rim
- (20) 41027-090 inner spokes
- (20) 41028-089 outer spokes
- KZ650
-
Genuine Kawasaki Parts ~ Used This is correct for 1975 Z1 900 (Shift pattern numbers were stamped smaller) but will work on 1974 and up. Great part for the restored bike. Includes Kawasaki P/N:- 14026-026 Chain Cover (1)
- 14026-012 Inspection Cover
- 14045-012 Gasket
- 220B0612 Screws (2)
- 74-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
-
Genuine Kawasaki, reconditioned Kawasaki P/N: 43041-1013 Applications:- 1980 KZ1000D Z1R
- 1979-1980 KZ1000A MKII
- 1979-1981 KZ1000C Police
-
Used set of cams for Z1 900, polished. Hollow cams Correct hollow shaft for 1973 and Early 1974 Z1- 12044-004 Intake
- 12044-005 Exhaust
- 1973 Z1 900 and Early 1974
-
Out of stock
Brush finish. Set of 2. Some have lower bracket as shown for fender brace, and some do not. Kawasaki uses the same part number for both versions. Consists of:- 1) 44005-1001 Left Hand Outer Tube
- 1) 44006-1001 Right Hand Outer Tube
- 2) 220B0408A Screws
- 2) 44045-002 Drain gaskets
- 2) 44049-024 Fork seals
- 2) 44010-032 Dust shields
- 2) 44043-044 Washers
- 2) 44044-012 Circlip
- 78 KZ1000A
- 77-80 KZ1000 LTD
- 80 KZ1000G, Z1 Classic
- 78-79 KZ750B
- 78-79 KZ650B
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 51023-040 Applications:- H1 500
- H2 750
- KH 500
-
Out of stock
Kawasaki P/N: 13031-1006 This one-year-only crankshaft is in nice shape. Rods and bearings feel good. No flywheel key. 10mm rotor bolt. Applications:- 78 KZ1000A
- 78 KZ1000 LTD
- 78 Z1R
-
Used KZ1000 crankcase with no damage. Bottom only with shift drum ad shift fork. Kawasaki P/N: 14001-107-2J Application:- 77-78 KZ1000
- May fit others