- 1991 KX80-R1, S1, T1, V1
- 1991 KX100-B1
-
All pages are nice, clear and legible. Page edges are showing wear/dirt from use, handling and storage. Cover and binding in place showing wear/dirt from use, handling and storage. Print Date: August 1, 1990 Kawasaki P/N: 99924-1144-01 Models Covered: -
Headlamp Bracket Right Side Kawasaki Genuine Part ~ New Old Stock Has some scuffs as shown from storage Kawasaki P/N: 44034-040-21 Application:- 72-73 H2 750
-
Out of stock
Sold as a set of 8 Kawasaki P/N: 92049-1153 Applications:- 1980-1983 KZ550 A1-A4
- 1980-1983 C1 (LTD)
- 1981 KZ550 D1 (GPz)
- 1983 KZ550 F1 (Spectre)
- 1984 KZ550 F2 (LTD Shaft)
- 1982-1983 H1-H2 (GPz)
- 1983 KZ550 M1 (LTD Shaft)
- 1983-1990 ZR550 B1-B4 (Zephyr)
- 1984-1986 ZX550 A1-A3 (GPz)
-
Out of stock
Set of 2 Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23019-022 Applications below -
Out of stock
Some shelf wear, as shown. We are not 100% sure on the part number but we believe it to be: Kawasaki P/N: 44034-069 Applications:- 1974-1975 H1 500
- May also fit 1974-1975 H2 750
-
- Powder Coated Hub
- Buchanan Stainless Steel Spokes and Nipples
- New Bearings
- New DID Rim
- New Rim Band
- 1973-1975 Z1 900
- 1972-1975 H1 500
- 1972-1975 H2 750
-
Bearings to fit rear brake hub and sprocket carrier. Kit P/N: 0215-0830 Replaces Kawasaki P/N's: 1) 601B6304Z Bearing 1) 601B6304 Bearing 1) 601B6206 Bearing 1) 92050-027 Seal Applications:- 1972-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- May fit others
-
Kawasaki P/N's: 44006-1090 Right 44005-1090 Left Applications:- 1982-1983 KZ750 Spectre
-
Out of stock
Quality Reproduction Part Replaces Kawasaki P/N: 92064-035 Applications:- Early Z1 900
- May work on others
-
Out of stock
Kawasaki P/N: 16087-002 Applications:- A1 250
- A1SS 250
- A7 350
- A7SS 350
- F3 175 Bushwacker
- F4 250 Sidewinder
-
Quality Reproduction Grab Rail with Hardware Kawasaki P/N: 35032-022 (10276) Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
-
All pages are nice, clear and legible; showing some discoloration due to age. Page edges are showing wear/dirt from use handling and storage. Cover/Binding are in place showing some wear/dirt from use, handling and storage. Print Date: June 1975 Kawasaki P/N: 99997-715 -
Out of stock
Big dent on the left side, as shown. Shelf wear and scratches, as shown. Poor storage, as shown, on right side. Inside of the tank looks decent. Kawasaki P/N: 51001-109-3P Applications:- 1976 KZ400
-
Carburetor Holder Set - Left & Right Quality Made Reproduction Part Replaces Kawasaki P/N's: (2) 16065-028 Right (2) 16065-029 Left (4) 92068-006 Rubber Plug Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900 All
- 1977-1980 KZ1000 All
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92073-016 Applications:- 1970 F5 BIGHORN
- 72-75 F9 350
- 71-75 F7 175
- 76-79 KD175A
- 76-78 KE175B
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 44045-049 This part is for the headlight mounting brackets to absorb vibration in order to prevent stress cracking and premature headlight failure. They fit below the brackets, over the fork upper tube. Some of the models listed use 4, some use 2. These are considered must have parts for proper headlight mounting. Sold as Shown. Applications:
- 1983 EX305 B1 (Gpz 305)
- 76-79 KE125 A3-A6
- 1974 KS125
- 1975 KS125 A
- 78-79 KZ200 A1-A2, A1A
-
Quality Reproduction Parts Includes Kawasaki P/N: 1) 92007-031 Bolt 1) 92022-230 Washer Our PN: 92007-031 Applications:- 73-75 Z1 900
- 76-77 KZ900 All
- 74-75 H2 750
- 78, 80 Z1R
- 73-75 H1
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/Ns: Inner ~ 43050-003 (1) Outer ~ 43051-002 (1) Our P/N: 43050-003-SET Application 1975 KZ 400 -
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 21156-007 Application:- 72 H1 500 B
-
Out of stock
Complete Gasket Kit Includes the Following: 11004-048 (3) 11009-019 (3) 18067-008 (3) 16062-011 (6) 14046-014, 14045-012, 14050-005, 16094-002 Our P/N: VG-431 Applications:- 73-75 H1 500
- 76 KH500
-
Out of stock
Complete Gasket Kit Includes the Following: 11004-048 (3) 11009-019 (3) 16062-011 (6) 18067-008 (3) 14046-014 Our P/N: VG-421 Applications:- 69-72 H1 500
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14025-1244 Cover 11009-1220 Gasket NOS (2) 120P0635 Screws NOS Applications- 1981-1983 KZ1000J
- 1981-1982 KZ1000 LTD
- 1981-1982 KZ1000 CSR
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-1056 Dyno Cover -Superseded P/N: 14031-1292 14045-014 Gasket (New) Applications:- 1981-1983 KZ1000J
- 1981-1982 KZ1000 CSR
- 1981-1982 KZ1000 LTD
- KZ1000 Police J Motor
- KZ1100A
- KZ1100-L1
- Will work on others
-
Out of stock
Notice the taper on the rib which is correct for 1977-1978 KZ1000 Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-100-80 Cover 14045-014 Gasket (New) Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000B LTD
- 1978 KZ1000C Police
- 1978 KZ1000D Z1R
- Will fit others
-
Kawasaki P/N: 21049-008 Preceding Kawasaki P/N: 723131-8103 Applications:- C2SS
- C2TR
-
Kawasaki P/N: 42037-023 Applications:- 1973-1975 Z1 900
- Z1 Police
- 1976-1977 KZ900A
- KZ900C2 Police
- 1972-1975 H2 72
-
Comes with original box. Kawasaki P/N: 28001-030 Superseded P/N: 28001-020 Applications:- 1974-1975 H2 750
- 1973-1975 H1 500
- 1974-1975 S3 400
- 1974-1975 S1 250
-
Genuine Kawasaki ~ Used, Replated Kawasaki P/N: 42032-037 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900
-
New Kawasaki Genuine Part, New Old Stock Kawasaki P/N: 54011-1262 Application:- 88-93 KX125
-
Out of stock
Quality re-manufactured stator coil wiring harness Applications:- 73-75 Z1 900
- 78 & 80 Z1R
- 76-77 KZ 900A
- 76 KZ 900 LTD
- 77-80 KZ 1000 LTD
- KZ 1000G Z1 Classic
-
Genuine Kawasaki ~ Used, Powder Coated Kawasaki P/N: 32105-006 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- KZ900 Police
-
This decal is for the left or right. Kawasaki P/N: 56050-1866 Applications:- 1993 EX500
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
Out of stock
Genuine Kawasaki Part ~ Freshly powder coated Kawasaki P/N: 46094-019 Applications:- 77-80 KZ 1000 A
- 77-80 KZ 1000 LTD
- 78-81 KZ 1000 C
- 78-80 KZ 1000 D Z1R
- 76-79 KZ 750 B
- 77-79 KZ 650
- Will fit others
-
Kawasaki P/N: 56051-1563 Applications:- 1997 EX500
-
Quality Re-manufactured Part, Made in the U.S.A. Kawasaki P/N: 92003-071 Application:- 1972-75 H2 750 Mach IV
-
Highest Quality Reproduction Replacement Part. Made in Japan. Replaces Kawasaki P/N: 92066-017 Our P/N 72-152 ~includes 4 plugs~ Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 1976- Kz900B LTD
- 77-80 Kz1000A
- 77-80 Kz1000B LTD
- 78 & 80 Kz1000D Z1R
- 78-81 Kz1000C Police
- 79-80 Kz1000E Shaft
- 1980 Kz1000-G1 Classic
-
Brand new, beautiful brochure highlighting 2003 KAWASAKI Ninja series motorcycles. 14 page; full color, (11 "x 11") sales brochure showcasing their gorgeous product-line. *This brochure is sold as a reference item for restoration and as a collectible item only! Do not attempt to order any product from this catalog, as it is obsolete! Models Covered:- 2003 Ninja Series
- Ninja ZX-12R
- Ninja ZX-6R
- Ninja ZX-9R
- Ninja 500R
- Ninja ZX-7R
- Ninja 250R
- Ninja ZX-6RR
-
Kawasaki Genuine Part ~ New Kawasaki P/N: 92038-015 Applications:- 1976 KH250 A5
- 76-78 KH400 A3-A5
- 76-75 S1-A, S1-B, S1-C 250 Mach I
- 72-73 S2, S2-A 350 Mach II
- 74-75 S3, S3-A 400 Mach II
-
K&N delivers a race-spec oil filter which is built with a high-efficiency media specifically designed to withstand the high concentrates of synthetic racing oils. Replaces Kawasaki P/N: 16099-003 K&N P/N: KN-401 -
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
Fork Bracket has some scratches from shelf life. Kawasaki P/N: 44033-053-21 Applications:- 1973 S2
- 1974-1975 S3 400
- May work on others
-
Genuine Kawasaki Part Length 31mm Collars have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 92027-160 -
104 mm long ~ Aftermarket Kawasaki Part ~ Replaces Kawasaki P/N: 2) 92003-180 Applications:- 73-75 Z1 900
- 76-77 KZ900A