-
Yuasa P/N: YTX14AHL-BS Best battery for Z1 and Early KZ1000. Sealed battery. -
Out of stock
Doremi P/N: 10261 & 10262 Replaces Kawasaki P/N: 44034-046 & 44033-046 Our P/N: 44033-046-KIT This Fork Cover/Headlamp Stay is correct for 1973 Z1 900. Will also work on:- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 14032-1038 Applications:- 80-81 KZ440A LTD
- 80-81 KZ440B
- 80-81 KZ440D LTD BELT
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 42041-171 Could use a little cleanup. Applications:- 76 KZ900B (LTD)
-
P/N: EK630-92 Superseded P/N: DID630-92 Applications:- This is the chain for Z1 900 and KZ 900 using stock gearing
-
New, High Quality Reproduction Replacement Valves Made in Japan. Kit contains 4 intake valves & 4 exhaust valves. Replaces Kawasaki P/N: 12004-012 Intake (4) 12005-005 Exhaust (4) Our P/N: 10155 Applications:- 73-75 Z1 900
- 73-75 Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police
Item is eligible for free domestic shipping.
-
Very nice, no damage. Black finish. VIN# KZT00JE035978 -
Cases are in good shape except for a crack and missing pin, as shown. We took these off of a 1977 and they have a good VIN. Low cost shipping available. Sold as shown Local pickup is encouraged -
Out of stock
Handlebars are set up for internal wires. Chrome is pretty nice, has a few marks on the bottom. Genuine Kawasaki ~ Used Kawasaki P/N: 46003-1002 Applications:- 1977-1978 KZ1000 LTD
-
Kawasaki P/N's: 44006-1090 Right 44005-1090 Left Applications:- 1982-1983 KZ750 Spectre
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-1056 Dyno Cover -Superseded P/N: 14031-1292 14045-014 Gasket (New) Applications:- 1981-1983 KZ1000J
- 1981-1982 KZ1000 CSR
- 1981-1982 KZ1000 LTD
- KZ1000 Police J Motor
- KZ1100A
- KZ1100-L1
- Will work on others
-
Genuine Kawasaki ~ Used Cases are in good shape except for a crack and missing pin, as shown. We took these off a 1977 and they have a good VIN. Location: Farm -
Out of stock
Freshly powder coated Genuine Kawasaki P/N: 44037-1015 Kit includes: 44037-1015 clamp (1) 92003-064 Bolts (2) 461F 1200 Washer (2) Applications:- 80 KZ1000G Z1 Classic
- 79-80 KZ1000A
- 79-80 KZ1000 LTD
-
Out of stock
Nicely polished front hub. Kawasaki P/N: 41034-041 Contains the following Kawasaki P/N's: (1) 41039-028 Spacer (2) 601B203 Bearing (1) 654A254008 Seal (1) 481J400D Snap Ring Applications:- 1976-1977 KZ900A
- 1977-1978 KZ1000A
- 1976-1979 KZ750B
- KZ650B
- KH500
- KH400
-
Genuine Kawasaki Parts ~ Used Give your project a nice added touch! Triple clamp has been freshly powder coated & includes new bolts that we have manufactured here in the U.S. Semigloss Black Powder Coated. Sold as shown. Includes Kawasaki P/N: 44039-073 Upper Triple Clamp Kawasaki 46012-008 Top Clamps (qty 2) 44041-048 Triple Clamp Pinch Bolts (qty 2) 44041-038 Steering Stem Bolt (qty 1) 92020-007 Steering Stem Nut (qty 1) 410B0800 Washer (qty 1) 461F0800 Spring Washer (qty 7) 92007-002 Bolts (qty 4) Applications:- 76-77 KZ900 A
- 1976 KZ900 LTD
- KZ900 C2 Police
- 77-80 KZ1000
- 77-80 KZ1000 LTD
- 1980 KZ1000 G (Z1 Classic)
-
VIN #: 7A15679H3 Cylinder measures 56mm. Has scratches. Chip on top of cylinder. Use oversized piston for perfect use, but would work as-is. Engine cases have glue on bottom, as shown in photos. Crankshaft appears good. Possible low-cost shipping available. SOLD AS SHOWN - NO RETURNS See video for further description. Location: Farm
