- 74-78 KZ400
- 74-78 KZ440
- 81-82 KZ305 CSR
- 86-88 KZ305
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23006-044 Includes hardware as shown Application s: -
This used piston is in nice shape. Applications:- 77-78 KZ1000A
- 78-79 KZ650 SR
- 78 Z1R
-
New Old Stock Genuine Kawasaki P/N: 670B1507 Applications:- Z1 900
- Early KZ1000
- May fit others
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
This kit contains all necessary OEM replacement parts to rebuild one front brake caliper assembly. Kit made in Japan. Our P/N: 32-1289 Replaces Kawasaki P/N:- (1) 43054-003 Dust Seal
- (1) 43049-002 Piston Seal Ring
- (4) 43052-005 Dust Boot
- (4) 43053-006 O-Ring
- (1) 43057-003 Bleeder Cap
- 1976-77 KZ900A
- 1977-80 KZ1000A
- 1979-80 KZ1000B LTD
- 80 KZ1000D Z1R
- 1979-81 KZ1000C Police
- 1980 KZ1000-G1 Classic
- 1979-80 KZ1000E Shaft
-
Quality part, made in Japan. Replaces Kawasaki P/N: 44062-003 Applications:- 73-75 Z1 900
- 72-75 H2
- 76-79 KZ750B
- 76-77 KZ900A
- 76 KZ900 LTD
- 77 KZ1000A
- May fit others
-
Quality reproduction part, made in Japan. Kit replaces Kawasaki P/N:- 43063-001 (1)
- 43064-001 (1)
- 73-75 Z1 900
- 72-75 H2 750
- 72-75 H1 500
- KZ 900
- Others
-
Kawasaki P/N: 51001-1009-7V We bead blasted this tank to make sure it was able to accept emblems, as shown. Inside is nice, as shown. Outside has imperfections, as shown. Please keep in mind that the 78 KZ1000A takes a fuel valve that is held on with 2 bolts. Using the proper valve, this tank will fit: Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77 KZ1000A
- (Correct for a 78 KZ1000A)
-
Please call with needs! Motor SC84E***0632 Frame SC04-2000361 Offering for parts only. Stock airbag, fenders are gooned, tires are rotted out. Kick starter okay, we are getting the points cover and right side cover polished. (not shown in photos). Chain guard pretty good. Intake manifolds are junk, dyna cover has been scratched, seat lock is bad, side covers are okay. Wiring harness must be tested. Seat lock is bad. Still good parts on this bike, and some are interchangeable with the KZ1000. -
The pan and foam are in great condition. Cover is brand new. Kawasaki P/N: 53001-106 Applications:- 74-75 KZ400
- Looks like it will fit 76-77, but not 100% sure. Please check first.
-
This wheel assembly is great for unrestored every day rider. Rim has some marks and a few rust spots, otherwise very nice. OEM Kawasaki P/N: 42048-041 Consists of:- 41025-058 Genuine Takasago 2.5 x 18 rim
- (20) 41027-090 inner spokes
- (20) 41028-089 outer spokes
- KZ650
-
OEM Kawasaki P/N: 53001-1037 This seat needs to be recovered. Has a marginal repair job on the upper left front, as shown. Applications:- 78-70 KZ200
- May work on others
-
Out of stock
Sold as set of 2. These shock lowers were removed from a KZ1000A. Sold as shown, no returns. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- More
-
Out of stock
Genuine Kawasaki P/N: 27005-5019 Comes with 2 keys. Applications:- 81-82 KZ1000K LTD
- 81-82 KZ1000J
- 82 KZ1000R Eddie Lawson Replica
- 81 KZ1100B GPZ1100
- And more
-
We believe this is correct for 1981 Kz750 LTD There are 2 lower edge blemishes and 2 along front mounting area as shown. Overall Nice replacement seat. Kawasaki P/N: 53001-1107 Superseded P/N: 53001-1079 Application:- 81-83 Kz750 LTD
-
Genuine Kawasaki Part ~ Used Kawasaki P/N: 53001-1059 We removed this front seat from an 1980 KZ1300 B2. Sold as shown. Applications:- 1980 KZ1300 B2 only