- 73-75 Z1 900
- 77-78 KZ1000A
- And others
-
Quality reproduction P/N: 10483 Replaces P/N: 92024-044 Applications: -
Bike does run. Seat needs recovered 52,000 miles changed oil, filter and spark plugs. 1000 LTD carbs. No broken fins on cylinder or head. Could be a good motor for another police bike or street bike. Doesn’t smoke, could use some tuning. Tachometer and Speedometer are not working. Runs rough. Transmission is good, has all the gears. Goes into gear nicely, doesn’t seem to smoke. Charging system seems to be over-charging; regulator/rectifier is bad, but it is putting out of the stator, so it probably has a good flywheel. Side covers have tab broken off both right and left. We believe these to be original paint. Gas tank has rust inside. Fairing has the bracket on front and some extra holes where equipment has been mounted. Please give us a call with your needs. View movie for more details. -
Replaces Kawasaki P/N: 23048-012 Superseded P/N: 23048-1024 Applications:- Z1 900
- KZ900
- KZ1000 1978 and down
- KZ400
- KZ650
- Many more
-
New Old Stock Genuine Kawasaki P/N: 92027-1103 Applications:- KE100
- KM 100
- KE125
- KE175
- KE250
- KZ650
- 77-80 KZ1000A
- 77-80 KZ1000B
- May fit some KZ1000C Police
- 1980 KZ1000D / Z1R
- 79-80 KZ1000E Shaft
-
New Old Stock Genuine Kawasaki P/N: 11009-1165 Applications:- 81-83 KZ650H
- 78-79 KZ650 B2
- 80 KZ650 E1, F1
- 80-83 KZ750 Spectre
-
New Old Stock Genuine Kawasaki P/N: 11009-1500 Application:- 1986-87 ZL600
- 87-89 ZX600
- May fit others
-
New Old Stock Genuine Kawasaki P/N: 14045-029 Application:- 1977 KZ650
-
Reproduction 1st Over Piston Kit 66.5 mm Kit consists of:- 4) 13029-058 Pistons
- 4) 13025-046 Rings
- 4) 13002-022 Piston pins
- 8) 92036-021 Circlips
- 73-75 Z1 900
- 76-77 KZ900
-
New Old Stock Genuine Kawasaki P/N: 42036-1013 Applications:- 78-79 KZ650 SR
-
Out of stock
Quality reconditioned part, includes NOS gaskets and seals. Cover is in good condition. Has some chain marks, as shown. OEM Kawasaki P/N: 14024-007 Kit Includes:- 14024-007 Transmission cover
- 14058-004 Gasket
- 92050-024 Seal
- 92049-004 Seal
- 92050-048 Seal
- 73-75 Z1 900
- KZ1000
-
3 separate gaskets. Copper gaskets are .010 thick, with cylinder sleeve holes measuring 3.5". The mylar gasket has 3.25" holes. These may not go together. All 3 gaskets sold as a single item. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
-
Vesrah P/N: NK-4002 Replaces Kawasaki P/N: 11009-1208 Applications:- 81-87 KZ1000
- 81-83 KZ1100
- 84-85 ZN1100B
- 83-85 ZX1100A
- May fit others
-
Out of stock
This is an NOS Wiseco .040 thick fiber big bore base gasket. Cylinder liner openings measure 3.25" Applications:- 73-75 Z1 900
- KZ900
- KZ1000
- (Models with big bore sleeves)
-
Genuine Kawasaki ~ Used Grab bar is in pretty good condition, chrome is compromised around bolt area, as shown. Kawasaki P/N: 35011-1061 Applications:- 81 KZ250 D2 (CSR) only
- May fit others
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Out of stock
Nice chrome cover came from an older inventory we purchased. We estimate the chrome is about 20 years old. Very nice shape. OEM Kawasaki P/N: 14026-039-80 Comes with P/N: 14026-012 Chain oiler cover, as shown. Applications:- 77-78 KZ1000A
- 78 Z1R
- 77-78 KZ1000B (LTD)