- 72-75 H2 750
- 73-75 Z1 900
- 1980 KZ1000 G1 Z1 Classic
- 77-80 KZ1000 A
- 77-80 KZ1000 LTD
- 1976 KZ900 LTD
- 76-77 KZ900 A
- 76-79 KZ750 B
- 73-75 H1 500
- KH500 A
- F9 350
- KE250
-
Top of the line American Made Bolts with Washers. Bolt size: 12 x 36 Replaces Kawasaki P/N 92003-064 (2 bolts) Replaces Kawasaki P/N 461F1200 (2 washers) Applications: -
Highest Quality Reproduction Replaces Kawasaki P/N: 2) 92001-143 Bolts 2) 315B1000 Nuts Application:- 74-75 Z1 10mm
- 78 & 80 Z1R
- 76-77 KZ900
- 74-75 H2 750
- KZ900 LTD
- KZ1000 POLICE
- KZ1000G CLASSIC
- 77-80 KZ1000A
- Many others
-
New Old Stock Will fit:- 1976 KH500
- 73-75 Z1900
- 76-77 KZ900
- 1976 KZ900 LTD
- 78+80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000LTD
- 78-81 KZ1000 Police
- 81-82 KZ1000 CSR
-
Out of stock
New Kawasaki Genuine Part ~ NOS Application- KZ650
- 76-79 KZ750 B1-B4
- KZ900 ALL
- Z1 ALL
- KZ1000 POLICE C4A
- 77-78 KZ1000B
- 77-78 KZ1000A
- 77-78 B1/B2A
- 77-78 C1/C2
- 1978 D1
- KZ1000 POLICE
- C1/C1A/C2/C3
-
High Quality Reproduction Part Made in the U.S.A. Replaces Kawasaki P/N:42045-018 Nut 18mm 550D4035 Pin Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 72-75 H2 750 Triple
- 77-80 KZ1000A
- 76-79 KZ750B
-
We designed this bracket to be used on Z1 900 and KZ900A when the stock exhaust has been removed and the header is mounted. (Example: Vance & Hines, Kerker, Yoshimura) This part keeps the center stand from hitting the chain.* Our P/N: 35-CS10mm ID mounting hole-10mm Freshly powder coated by Ace Powder Coating! Applications:- 73-75 Z1 900
- 76-77 KZ900A
-
Sold as a set of 2 with washers Zinc Very High Quality Reproduction Part Made in the U.S.A. Our P/N: 35-115-Z Replaces P/N: 1) 92001-115 1) 110N0618 Washers Replace P/N: 1) 92022-195 1) 92022-125 Applications:- 76-77 KZ900A
- 73-75 Z1 900
- 1978 KZ1000D (Z1R)
-
Sold as a set of 2 with washers Very high quality reproduction part Made in the U.S.A. Replaces Kawasaki P/N's: 1) 92001-115 1) 110N0618 Screws Replaces Kawasaki P/N's: 1) 92022-195 1) 92022-125 Washers Our P/N: 35-115 Applications:- 76-77 KZ 900
- 73-75 Z1 900
- 1978 KZ 1000D Z1R
- 1977-1978 KZ1000
-
Kit contains: 2) 113N1035, 2) 461F1000 Part Number: 113N1035 Application:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B
- 72-75 H2 750
- 69-75 H1 500
- 1976 KH500-A8
- 78-80 KZ1000D Z1R
- 77-80 KZ1000A
- Many others
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Quality bolt made in the USA! Zinc This bolt has many other uses. 92001-115 (1) reproduction bolt Applications:- 73-75 Z1 900
- Z1R
- KZ900
- KZ1000A
- KZ650
-
Out of stock
Quality Aftermarket Rear Sprocket 35T, 630 Chain Replaces Kawasaki P/N: 42041-118 Our P/N: K22-3714 Stock on:- 73-75 Z1 900
- 76-77 KZ900A
-
Rear drum 18" Sold as shown P/N: KAW502SS Applications:- 73-75 Z1 900
- 72-75 H2 750
- 76-77 KZ900
-
40 Spoke Chrome Steel Rim DID 1.85 x 19 (WM2) Kawasaki P/N: 41025-051 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000a
- 1976 KH500A
- 72-75 H1 500 Triple
- 72-75 H2 750 Triple Disc brake model
- May work with others
-
Out of stock
Stainless Spokes. New D.I.D. rim. Application:- Late 73-75 H2 750
- 73-75 Z1 900
- 76-77 KZ 900
-
Quality American Made Parts Our P/N: CS10-mountkit Applications:- 73-75 Z1 900
- 76-77 KZ900A
-
Genuine Kawasaki Part. These nuts have been re-plated, so they will not all look exactly 100% the same. Some may have small marks from being removed from the motorcycle. Kawasaki P/N: 92090-007 Applications:- Z1 900
- KZ550
- KZ750 B
- Z1R
- KZ900
- KZ1000 G Classic
- S1, S2, S3
- KH400
- KZ650
- H1 500
-
Genuine Kawasaki Part; Machine cut, 52mm . The collars have been re-plated, so they will not all look exactly 100% the same. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G Z1 Classic
- 78 & 80 Z1R
- early KZ1000 Police
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
-
Genuine Kawasaki Part; Press cut, 52mm The collars have been re-plated, so they will not all look exactly 100% the same. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G Z1 Classic
- 78 & 80 Z1R
- early KZ1000 Police
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
-
Out of stock
OEM Style Quality Reproduction Handlebar Replaces Kawasaki P/N: 46003-029 Applications:- Z1-900
- KZ900A
- KZ1000
- KZ650
- Will work on many others
-
Quality reproduction part. Fits:- Z1900 73-75
- KZ900A 76-77
- 43011-017 brake rod
- 43012-002 spring
- 92015-056 adjuster
- 92027-177 front pin
- 92043-095 middle pin
- 92043-065 rear pin
- 92019-008 lock nut
-
High Quality Reproduction Part Made in the U.S.A.Replaces Kawasaki P/N: 42045-018 Nut 18mm 550D4035 PinApplications- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 72-75 H2 750 Triple
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 76-79 KZ750B
-
GENUINE KAWASAKI Nicely Polished Hub with new Seal and Bearing. Kawasaki P/N: 42008-013 Includes: 601B6206 Bearing, 92050-027 Seal APPLICATIONS:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
-
Out of stock
GENUINE KAWASAKI Nicely Polished Hub Notice no Rib in Webbing Kawasaki P/N: 42008-013 CORRECT FOR:- 1973 Z1 900
- 74-75 Z1 900
- 76-77 KZ900
-
Sale!
Ace 2.15 Rim Lock Bead Protector Nice piece for the Z1 900, KZ 900, H2 750 Rear Wheel -
Out of stock
This part has been given a powder coat finish by ACE Powder Coating. Nice, original used powder coated right front engine mount! Applications:- 76-77 KZ900A
- 1976 KZ900 LTD
- KZ900 Police
- 73-75 Z1 900
- 81 and down KZ1000 Police
- 77-80 KZ1000A
- 78 & 80 Z1R
- KZ1000G (Z1 Classic)
- 77-80 KZ1000 LTD
-
Nice, original used powder coated lower right motor mount! This part has been given a powder coat finish. Kawasaki P/N: 32030-026 Applications:- 76-77 KZ900 A4-A5
- 1976 KZ900 B1 LTD
- KZ900 Police
- 73-75 Z1 900
- Z1 Police
- 79-80 KZ1000 E1-E2 (Shaft)
- 77-80 KZ1000 A1-A4
- 78-80 KZ1000 D1 & D3 (Z1R)
- 1980 KZ1000 G1 (Classic)
- 77-80 KZ1000 B1-B4 LTD
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 27010-1009 Sold as Shown Kit includes: 1) 46028-003 Horn Push Button 1) 46079-003 Contact 1) 46031-005 Spring Applications:- MT1
- H2 750
- H1 500
- KV 75
- F5
- KZ400
- Z1 900
- F9
- S2 350
- 77-78 KZ1000
- F6
- KZ650
- KZ900
-
EK630 ROLLER CHAIN 630x92 Correct length with stock sprockets, size (15t front & 35t rear) Comes with one masterlink (THIS IS NOT AN O-RING CHAIN) Part Number: EK630 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 76 KZ900 LTD
-
Quality American Made Parts. Our P/N: CS10 kit Applications*:- 73-75 Z1 900
- 76-77 KZ900A
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
Cam Chain Guide Roller Rubbers Quality Japanese Made Part for Kawasaki Replaces Kawasaki P/N: 92075-232 Our P/N: 10992 Sold as Shown (set of 4) Applications:- 73-75 Z1 900
- 76-77 KZ 900
- 1977 KZ 900 LTD
- 78&80 Z1R
- 77-80 KZ1000
- 77-80 KZ1000 LTD
-
Out of stock
Quality Japanese Made Reproduction Kit Kawasaki P/N: 92075-128 Kit Includes: 4) 92075-128 rubber, turn signal 2) 23076-001 collar, headlamp body 2) 23066-005 damper rubber 2) 23066-001 damper rubber Applications:- 73-75 Z1 900
- 76-77 KZ900A
-
Replaces Kawasaki P/N: 92071-056 Sold as shown, set of 6. Applications:- KT250
- S2 350
- S3
- KH400
- 73-75 H1 500
- 76 KH500
- KZ550
- KZ650
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-80 KZ1000 A
- 77-80 KZ1000 LTD
- KZ1000 POLICE
-
Quality Japanese Made Part for Kawasaki Kawasaki P/N: (1) 92066-026 Plug & (1) 670B1508 O-ring Plug P/N superseded by 92001-1183 Magnetic Drain Plug Application:- 77-78 KZ1000LTD
- 77-78 KZ1000 POLICE
- 76-77 KZ900A
- 1976 KZ900LTD
- 73-75 Z1900
- 77-78 Kz1000A
- 1978 Z1R
- 74-77 KZ400
- may fit others
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92056-003 Sold as Shown Applications:- 73-75 Z1 900
- 76-77 KZ900 A
- 1976 KZ900 LTD
- 1980 KZ1000 G (Z1 CLASSIC)
- 78 & 80 Z1R
- 76-79 KZ750
- 78-81 KZ1000 POLICE
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 77-80 KZ650
-
Out of stock
Quality reproduction part made in Japan Replaces Kawasaki P/N: 92037-092 Our P/N: 10705 Set of 2 Applications:- 72-75 H2 750
- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
-
NOS Clutch Cable Clamp. This is the guide that bolts to the triple clamp on the left side for the clutch cable. Kawasaki P/N: 92037-090 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 1980 KZ1000-G1 Classic
- 76-79 KZ750B
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92027-177 Applications:- KZ900
- Z1
-
Kawasaki Genuine Part ~ REPLATED Not all spacers will look the same Kawasaki P/N: 92026-108 Applications:- 74-75 Z1 900
- 76-77 KZ900A
-
Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92003-099 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
Out of stock
Doremi P/N: 10261 & 10262 Replaces Kawasaki P/N: 44034-046 & 44033-046 Our P/N: 44033-046-KIT This Fork Cover/Headlamp Stay is correct for 1973 Z1 900. Will also work on:- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
-
Out of stock
Doremi P/N: 10262 Replaces Kawasaki P/N: 44033-046 This Fork Cover/Headlamp Stay is correct for 1973 Z1 900. Please indicate Right or Left Side Will also work on:- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
-
This is an exact replica of the original master cylinder ribbed rubber dust cover. Replaces Kawasaki P/N: 43069-001 Our P/N: 11224 Applications:- 73-75 Z1 900
- 76-77 KZ900 A
- 1976 KZ900 LTD
- EARLY KZ400
- 77-78 KZ1000 LTD
- EARLY KZ1000 POLICE
- Will fit others
-
Out of stock
Kawasaki P/N: 43059-007 Applications:- 72-75 H2
- 73-75 Z1
- 76-79 KZ750B
- 76-77 KZ900A
- 1976 KZ900 LTD
- 77-78 KZ1000A
- May Fit Others
-
Kawasaki Genuine Part ~ Zinc Plated Kawasaki P/N: 42031-034 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 77-81 KZ1000C POLICE
- 78-80 Z1R
- 80 KZ1000 G CLASSIC
-
42010-021 Rear Hub Bearing Spacer Quality reproduced in the USA Application:- Z1 900
- H2 750
- KZ900A
