- 1975 Z1 900
- 76-77 KZ900A
- 1980 KZ750 LTD II
- 76-79 KZ750 B (Left hand only)
- 81-82 GPZ 1100
- 82-05 KZ1000 Police
- 81-82 CSR1000
- 77-82 KZ1000 LTD
- 81-83 KZ1000J
- 1980 KZ1000G Classic
- 78 & 80 Z1R
- 77-80 KZ1000A
-
Out of stock
Rear Chain Adjuster with Bolt and Nut Genuine Kawasaki Part The chain adjusters have been re-plated, so they will not all look exactly 100% the same. Bolt and nut are new. Kawasaki P/N: 33040-066 Applications: -
Out of stock
Genuine Kawasaki ~ Reconditioned Part Kawasaki P/N: 33044-001 Applications:- 74-75 H2 750
- 73-75 Z1 900
- 76-77 KZ 900
- 1976 KZ 900 LTD
- 77-80 KZ1000 (All)
- *will fit others*
-
Genuine Kawasaki ~ New Old Stock Kawasaki P/N: 33044-001 Applications:- 74-75 H2 750
- 73-75 Z1 900
- 76-77 KZ 900
- 1976 KZ 900 LTD
- 77-80 KZ1000 (All)
- *will fit others*
-
Genuine Kawasaki ~ Reconditioned Kawasaki P/N: 33044-001 Applications:- 1974-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900
- 1976 KZ900 LTD
- 1977-1980 KZ1000 (All)
- May fit others
-
We recommend changing out all of the petcocks on our restorations to the Pingel unit. Here we have the dual-outlet. Quality made in the U.S.A. These will fit other models with the proper adapter. Give us a call for more info if your bike is not listed here. Applications:- 76-77 KZ900A
- 76 KZ900 LTD
- 77 KZ1000A
- Will work on others
-
Powdercoated OEM Kawasaki P/N: 34003-036 Applications:- 73-75 Z1 900
- Early KZ900A
- 78 Z1R
- 77-80 Kz1000 LTD
- KZ1000 G
- Will fit Z1 900
-
Freshly Powder Coated. Nice Genuine Parts. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Contains the following Kawasaki P/N's:- 34011-029 Stand OEM powder coated
- 34023-012 Spring
- 34019-014 Bolt
- 92016-044 Nut
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Out of stock
These NOS stands came from an older inventory. There was some small damage from poor shelf life, so they have been freshly powder coated. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Out of stock
Quality powder coated center stand. Replaces Kawasaki P/N: 34011-1004KIT Kit consists of:- (1) 34011-1004 Main stand
- (1) 34023-012 Spring
- (2) 34019-014 Bolts
- (2) 92016-044 Nuts
- 73-75 Z1 900 (With 4-into-1 header)
- 77-78 KZ1000A (With 4-into-1 header)
- 78 Z1R
-
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 34019-014 Kit consists of:- (2) 34019-014 Bolts
- (2) 92016-044 Nuts
- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- 78 Z1R
-
Quality Reproduction Part Made in Japan Replaces P/N: 34023-012 Our P/N: 10449 Fits:- Kawasaki KZ
- Kawasaki Z1
-
This is a short stand for a lowered bike. Used. Genuine Kawasaki P/N: 34024-038 Measures approximately 7.5" from center of bolt to base. Applications:- 1973-75 Z1 900
- 1976 KZ900A
- May fit others
-
Kawasaki P/N: 34025-005 Applications:- 73-75 Z1
- 76-77 KZ900
- 77-83 KZ1000
- KZ650
- KZ440
- Many more
-
Out of stock
Quality replacement parts Set consists of:- (1) 24028-011 left footrest
- (1) 34028-012 right footrest
- (4) 92075-140 rubber bushings
- (1) 34003-036 left bracket
- (1) 34003-037 right bracket
- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- 77-78 KZ1000 LTD
- 76 KZ900 LTD
-
Sold as a set of 2 with washers Very high quality reproduction part Made in the U.S.A. Replaces Kawasaki P/N's: 1) 92001-115 1) 110N0618 Screws Replaces Kawasaki P/N's: 1) 92022-195 1) 92022-125 Washers Our P/N: 35-115 Applications:- 76-77 KZ 900
- 73-75 Z1 900
- 1978 KZ 1000D Z1R
- 1977-1978 KZ1000
-
Sold as a set of 2 with washers Zinc Very High Quality Reproduction Part Made in the U.S.A. Our P/N: 35-115-Z Replaces P/N: 1) 92001-115 1) 110N0618 Washers Replace P/N: 1) 92022-195 1) 92022-125 Applications:- 76-77 KZ900A
- 73-75 Z1 900
- 1978 KZ1000D (Z1R)