- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-78 KZ1000A
- Others
-
Out of stock
Quality Japanese Parts Made by Daiichi Our P/N: 21008-027 Applications: -
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Quality reproduction part, replaces Kawasaki P/N: 25023-015 Superseded P/N: 25023-1006 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- 1977-1980 KZ1000A
- 1976-1979 KZ750B
- Early KZ650
-
Quality reproduction parts. Kit includes the following OEM P/N's:- 92075-120 (2)
- 92075-119 (2)
- 73-75 Z1 900
- 76-77 KZ900
- 76 KZ900B LTD
-
Out of stock
Quality Reproduction Replaces Kawasaki P/N: 35004-1012 Applications:- 1977-1980 KZ1000B LTD
- 1976 KZ900B LTD
- 1980 KZ750G LTD
-
Genuine Part ~ Used and replated Kawasaki P/N's: 1) 92001-113 BOLT 1) 92022-244 WASHER Application- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
- 1980 KZ1000-G1 CLASSIC
-
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
Aftermarket Sprocket from Sunstar Replaces Kawasaki P/N: 13144-046 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1976 KZ900B LTD
- 1977-1980 KZ1000A
- 1977-1980 KZ1000B LTD
- 1978 and 1980 KZ1000D Z1R
- 1978-1981 KZ1000C Police
- 1980 KZ1000G Zl Classic
-
New Old Stock Genuine Kawasaki P/N: 43007-047 This is NOS but has some shelf wear. Applications: 1976 KZ900 B1 (LTD 900) -
New Old Stock Kawasaki P/N: 92043-079 Applications:- 1973-1975 Z1
- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1980 KZ1000A and LTD
- and more
-
New Old Stock Genuine Kawasaki P/N: 92043-127 Applications:- 1976 KH250
- 1976-1978 KH400
- 1976-1977 KZ900A
- 1976 KZ900B
- 1977-1978 KZ1000A
- 1977-1980 KZ1000 LTD
- 1980 KZ1000G Z1 Classic
-
ZINC Re-plated Front Brake Caliper Shaft Bolts Includes Kawasaki P/N:- 43045-006 Bolts (2)
- 43040-004 Spacer (1)
- 76-77 KZ900 All
- 77-80 KZ1000 All
- 76-79 KZ750B Twin
- 77-79 KZ650 All
- Will fit others
-
Kawasaki Genuine Part ~ Used See photos for condition. Kawasaki P/N: 42032-077 Applications:- 1976 KZ900 LTD
-
Quality reproduction part. Mfr P/N: 18-2453 Applications:- 76-77 KZ900
- 76 KZ900 LTD
-
Out of stock
Quality reproduction exhaust collars. Set of 8. Replaces Kawasaki P/N: 92027-170 Applications:- 73-75 Z1 900
- 76-77 KZ900 All
- 77-80 KZ1000 All
-
Kawasaki P/N: 23051-042 Kawasaki Genuine Part ~ New Old Stock Applications:- 1976 KZ900 LTD
- 77-80 KZ1000 LTD
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 42041-171 Could use a little cleanup. Applications:- 76 KZ900B (LTD)
-
Quality Japanese Parts Made by Daiichi Our P/N: 21008-027-KIT Kit Includes:- 21008-028 Point
- 21008-027 Point
- 21013-035 Condenser
- BR8ES Spark plugs (4)
- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-78 KZ1000A
- Others
-
Out of stock
Quality re-plated part. Contains OEM Kawasaki P/N: 53011-008 (Seat pin) 92041-003 (Cotter pin) Applications: Each bike takes 2 each- 73-75 KZ900
- KZ900 LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- May fit others
-
Genuine Kawasaki Parts ~ Used This is correct for 1975 Z1 900 (Shift pattern numbers were stamped smaller) but will work on 1974 and up. Great part for the restored bike. Includes Kawasaki P/N:- 14026-026 Chain Cover (1)
- 14026-012 Inspection Cover
- 14045-012 Gasket
- 220B0612 Screws (2)
- 74-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
-
Aftermarket sprocket from Sunstar Sunstar P/N 60515 Replaces Kawasaki P/N: 13144-046 or 13144-062 Applications:- 1973-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B LTD
- 77-80 Kz1000A
- 77-80 Kz1000B LTD
- 78 & 80 Kz1000D Z1R
- 78-81 Kz1000C Police
- 1980 Kz1000G Z1 Classic
-
New Old Stock Genuine Kawasaki P/N: 27011-009 Superseded P/N: A1020-7742 Applications:- A1
- A7
- 73-75 Z1 900
- All KZ900
- 77-80 KZ1000
- KZ650 SR
- KZ1000 Z1R
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 51035-009 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 73-75 S1 250
- 76 KH250
- Many more
-
Quality reproduction part Replaces OEM Kawasaki P/N: 44013-037 Set of 2 Fork Tubes Applications:- 76-77 KZ900A
- 76 KZ900 LTD
- 73-75 Z1 900
- 77 KZ1000 A
-
Nice used camshaft set, includes sprockets and bolts, as shown. Genuine Kawasaki P/N's: 12044-014 Intake- Superseded from 12044-004
- Superseded from 12044-005
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)
-
New Old Stock Genuine Kawasaki P/N: 13151-5003 Superseded P/N: 13151-022 Applications:- 76-77 KZ900
- 76 KZ900 LTD
- 77-99 KZ1000
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
Quality part, made in Japan. Replaces Kawasaki P/N: 44062-003 Applications:- 73-75 Z1 900
- 72-75 H2
- 76-79 KZ750B
- 76-77 KZ900A
- 76 KZ900 LTD
- 77 KZ1000A
- May fit others
-
Used part. Very good condition. Kawasaki P/N: 25008-045 Superseded P/N: 25008-039 Applications:- KZ900
- KZ900 LTD
- 77-78 KZ1000A
- 76-79 KZ650
- KZ750B
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 46092-022 Applications:- 76-77 KZ900A
- KZ900 LTD
- KH500
- 77-78 KZ1000A
- And more
-
New Old Stock Genuine Kawasaki P/N: 18069-046 Applications:- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
-
New Old Stock Genuine Kawasaki P/N: 46092-022 Applications:- 76-77 KZ900A
- 76 KZ900 B
- 77-78 KZ1000A
- 76 KH500
- Will work on others
-
New Old Stock Genuine Kawasaki P/N: 92007-047 Applications:- 76-77 KZ900A
- 77-80 KZ1000A
- KZ900 LTD
- KZ1000 Police
- 78&80 Z1R
- KZ1000 LTD
- KH400
- GPZ550
- Will fit many others. Please check first.
-
New Kawasaki Genuine Shim ~ New Old Stock Kawasaki P/N: 12037-015 Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B Ltd
- 77-80 Kz1000A
- 77-80 Kz1000B Ltd
- 78-81 Kz1000C Police
- 78 & 80 Kz1000D Z1R
- 79-80 Kz1000E Shaft
- 1980 Kz1000-G1 Classic
- 81-83 Kz1000J
- 81-82 Kz1000K Ltd
- 81-82 Kz1000M CSR
- 82-83 Kz1000R Eddie Lawson Replica
- 81-83 Kz1100A Shaft
- 81-82 Kz1100B GPz
- 82-83 Kz1100D Spectre
-
New Old Stock Genuine Kawasaki P/N: 23066-003 Sold as set of 2 rubbers. Applications:- 77-80 KZ900 LTD
- 77-80 KZ1000 LTD
- Many more
-
Kawasaki P/N: 23051-043 Kawasaki Genuine Part ~ New Old Stock Applications:- 1976 KZ900 LTD
- 77-80 KZ1000 LTD
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13129-046 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E Shaft
- 1980 KZ1000-G1 Classic
-
The surface is not perfect but IS new. Has some light marks from a long shelf life. Kawasaki P/N: 42032-061 Applications:- 1976 KZ900 LTD
- 76-79 KZ750B
-
Quality powder coated part. Has some minor pitting, as shown. OEM Kawasaki P/N: 32100-020 Includes NOS rubber grommets:- P/N: 92071-056
- P/N: 92075-078 (2)
- 76-77 KZ900A
- 76 KZ900 LTD
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 128-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
New Old Stock Genuine Kawasaki P/N: 35039-004 Applications:- Z1 900
- KZ900A
- KZ900 LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- Many more
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 46043-005 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 72-75 H2 750
- 73-75 H1 500
- 1976 KH500
- 73-75 S1 250
- 1976 KH250
- 74-75 S3 400
- 76-78 KH400
- 77-78 KZ1000A
- 77-78 KZ1000B LTD
- 74-77 KZ400
- 76-79 KZ750B
-
Out of stock
This line was made in Japan Kawasaki replacement P/N: 43059-011 Includes Genuine Kawasaki damper rubber P/N: 43064-001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77 KZ1000A
- 76 KZ900 LTD (takes 2, with metal lines going to the calipers)
-
Out of stock
New Old Stock Kawasaki P/N: 25008-045 Superseded P/N: 25008-039 Application:- KZ900
- KZ900 LTD
- 77-78 KZ1000A
- 76-79 KZ650
- KZ750B
- Will fit others
-
Nicely polished OEM Part Kawasaki P/N: 44062-003 Applications:- 73-75 Z1 900
- 72-75 H2
- 76-79 KZ750B
- 76-77 KZ900A
- 76 KZ900 LTD
- 77 KZ1000A
- May fit others
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
Manufactured by ANNY in Japan. Lightweight, made out of titanium. Each pipe weighs only 4 lbs. These are prototype pipes, that have been run for about 500 miles. They produce a very nice sound. Bottom left pipe has a very tiny ding, as shown. See video below as we demonstrate these pipes on a customer’s 76 KZ900. (Bike is not for sale.) These retail for $4,000. Applications: 73-80- Z1 900
- KZ900 LTD
- KZ1000 LTD