- Z1 900
- KZ900 LTD
- KZ1000 LTD
-
Manufactured by ANNY in Japan. Lightweight, made out of titanium. Each pipe weighs only 4 lbs. These are prototype pipes, that have been run for about 500 miles. They produce a very nice sound. Bottom left pipe has a very tiny ding, as shown. See video below as we demonstrate these pipes on a customer’s 76 KZ900. (Bike is not for sale.) These retail for $4,000. Applications: 73-80 -
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
Genuine Kawasaki Parts ~ Used This is correct for 1975 Z1 900 (Shift pattern numbers were stamped smaller) but will work on 1974 and up. Great part for the restored bike. Includes Kawasaki P/N:- 14026-026 Chain Cover (1)
- 14026-012 Inspection Cover
- 14045-012 Gasket
- 220B0612 Screws (2)
- 74-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
-
Out of stock
Fork outer tubes have been brush polished. Set includes:- 44005-063 LH Outer Tube
- 44006-061 RH Outer Tube
- 44009-024 Fork Seals
- 44010-032 Dust Shields
- 220B0408A Screws
- 44045-002 Seals
- 76-77 KZ900A
- 76 KH500
- 77 KZ1000A
- 76 KZ900 LTD
- May fit others
-
Nice used camshaft set, includes sprockets and bolts, as shown. Genuine Kawasaki P/N's: 12044-014 Intake- Superseded from 12044-004
- Superseded from 12044-005
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)
-
Nicely powder-coated battery box. Includes 92071-056 rubber grommet. Applications:- 76-77 KZ900A
- 76 KZ900 LTD
-
Out of stock
Genuine Kawasaki ~ Used Chrome is not 100% perfect, but this is a very nice part. Kawasaki P/N: 35032-040 Applications:- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- Will fit others
-
Quality reproduction part Replaces OEM Kawasaki P/N: 44013-037 Set of 2 Fork Tubes Applications:- 76-77 KZ900A
- 76 KZ900 LTD
- 73-75 Z1 900
- 77 KZ1000 A
-
Out of stock
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13161-029 Applications:- 76-77 KZ900
- KZ900 LTD
- KZ900 Police
- 73-75 Z1900
- 78+80 Z1R
- 80 KZ1000G, Z1 Classic
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- Early KZ1000 Police
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Genuine Kawasaki ~ Used ~ Powder Coated ~ Semi-Gloss Kawasaki P/N's: 44037-098 Steering Stem (2) 92003-064 Bolt (2) 461F1200 Washer Applications:- 1976-1977 KZ900 A4-5
- 1976 KZ900 B1 LTD
- 1977-1978 KZ1000 A1-2
- 1977-1978 B1-2 LTD
-
We recommend changing out all of the petcocks on our restorations to the Pingel unit. Here we have the dual-outlet. Quality made in the U.S.A. These will fit other models with the proper adapter. Give us a call for more info if your bike is not listed here. Applications:- 76-77 KZ900A
- 76 KZ900 LTD
- 77 KZ1000A
- Will work on others
-
Out of stock
Quality Reproduction Replaces Kawasaki P/N: 35004-1012 Applications:- 1977-1980 KZ1000B LTD
- 1976 KZ900B LTD
- 1980 KZ750G LTD
-
Genuine Kawasaki Parts ~ Used Give your project a nice added touch! Triple clamp has been freshly powder coated & includes new bolts that we have manufactured here in the U.S. Semigloss Black Powder Coated. Sold as shown. Includes Kawasaki P/N: 44039-073 Upper Triple Clamp Kawasaki 46012-008 Top Clamps (qty 2) 44041-048 Triple Clamp Pinch Bolts (qty 2) 44041-038 Steering Stem Bolt (qty 1) 92020-007 Steering Stem Nut (qty 1) 410B0800 Washer (qty 1) 461F0800 Spring Washer (qty 7) 92007-002 Bolts (qty 4) Applications:- 76-77 KZ900 A
- 1976 KZ900 LTD
- KZ900 C2 Police
- 77-80 KZ1000
- 77-80 KZ1000 LTD
- 1980 KZ1000 G (Z1 Classic)