- 73-75 Z1 900
- 78 & 80 Z1R
- 76-77 KZ 900A
- 76 KZ 900 LTD
- 77-80 KZ 1000 LTD
- KZ 1000G Z1 Classic
-
Left Engine Cover Stater Replacement Grommet Applications: -
Out of stock
Genuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Out of stock
Quality re-manufactured stator coil wiring harness Applications:- 73-75 Z1 900
- 78 & 80 Z1R
- 76-77 KZ 900A
- 76 KZ 900 LTD
- 77-80 KZ 1000 LTD
- KZ 1000G Z1 Classic
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Quality reproduction parts. Kit contains all bolts and spacers to mount the engine. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000 LTD
- 78+80 Z1R
- 77-80 KZ1000A
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Out of stock
Genuine Replated Kawasaki Part Head: Plain with stamped dot Kawasaki P/N: 113B1256A Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 80 KZ1000G Classic
- 79-80 KZ1000 Shaft
- Z1R
- 77-80 KZ1000
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Out of stock
Quality re-plated original part. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-1265 Applications:
- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Kit contains: 2) 113N1035, 2) 461F1000 Part Number: 113N1035 Application:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B
- 72-75 H2 750
- 69-75 H1 500
- 1976 KH500-A8
- 78-80 KZ1000D Z1R
- 77-80 KZ1000A
- Many others
-
QUALITY USA MADE Replaces Kawasaki P/N: 114B1025 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000C POLICE
- 80 KZ1000 G CLASSIC
- 72-75 F9
- 73-75 F11
- 70 F5
- 71 F81M
- 72 F8
Item is eligible for free domestic shipping.
-
Quality Reproduction Made in Japan Replaces Kawasaki P/N: 12004-012 Applications:- 73-75 Z1 900
- 73-75 Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police
Item is eligible for free domestic shipping.
-
New, High Quality Reproduction Replacement Valves Made in Japan. Kit contains 4 intake valves & 4 exhaust valves. Replaces Kawasaki P/N: 12004-012 Intake (4) 12005-005 Exhaust (4) Our P/N: 10155 Applications:- 73-75 Z1 900
- 73-75 Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police
Item is eligible for free domestic shipping.
-
New, High Quality Reproduction Replacement Valve Made in Japan. Replaces Kawasaki P/N: 12005-005 Applications:
- 73-75 Z1 900
- 73-75 Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police
Item is eligible for free domestic shipping.
-
New Kawasaki Genuine Shim ~ New Old Stock Kawasaki P/N: 12037-015 Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B Ltd
- 77-80 Kz1000A
- 77-80 Kz1000B Ltd
- 78-81 Kz1000C Police
- 78 & 80 Kz1000D Z1R
- 79-80 Kz1000E Shaft
- 1980 Kz1000-G1 Classic
- 81-83 Kz1000J
- 81-82 Kz1000K Ltd
- 81-82 Kz1000M CSR
- 82-83 Kz1000R Eddie Lawson Replica
- 81-83 Kz1100A Shaft
- 81-82 Kz1100B GPz
- 82-83 Kz1100D Spectre
-
Kawasaki P/N: 12037-022 Applications:-
1973-1975 Z1 900
-
1976-1977 Kz900A
-
1976 Kz900B Ltd
-
1977-1980 Kz1000A
-
1977-1980 Kz1000B Ltd
-
1978-1981 Kz1000C Police
-
1978 & 1980 Kz1000D Z1R
-
1979-1980 Kz1000E Shaft
-
1980 Kz1000-G1 Classic
-
1981-1983 Kz1000J
-
1981-1982 Kz1000K Ltd
-
1981-1982 Kz1000M CSR
-
1982-1983 Kz1000R Eddie Lawson Replica
-
1981-1983 Kz1100A Shaft
-
1981-1982 Kz1100B GPz
-
1982-1983 Kz1100D Spectre
-
-
Nice used camshaft set, includes sprockets and bolts, as shown. Genuine Kawasaki P/N's: 12044-014 Intake- Superseded from 12044-004
- Superseded from 12044-005
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)
-
Out of stock
Kawasaki P/N: 12049-1003, replaces 12047-003 Applications:- 73-75 Z1
- 78 Z1R
- Early KZ1000 Police
- 77-78 KZ1000 LTD
- 77-78 KZ1000
- 76-77 KZ900 A
- 76 KZ900 LTD
- Early KZ650
-
Quality Japanese manufactured part Our P/N: 10607 Replaces P/N: 12053-001 Superseded # 12053-019 Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 80 KZ1000G / Z1 Classic
- 78 and 80 Z1R
- KZ1000 Police up to 81
- 79-80 KZ1000E
-
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 12055-002 Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 78+80 Z1R
- 79-80 KZ1000E
- 80 KZ1000G Z1 Classic
- 75-81 KzZ1000 Police
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 128-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Genuine Kawasaki - Used Early edition- shaft is half hollow, as shown. Kawasaki P/N: 13066-029 Kickstart Shaft 13078-011 Kickshaft Ratchet 13068-028 Kickstarter Gear 92028-126 Kickshaft Collar Applications:- KZ750 B
- KZ900 A
- KZ900 LTD
- Z1 900
- 77 KZ1000 LTD
- 77 KZ1000 A
Item is eligible for free domestic shipping.
-
New Old Stock Kawasaki P/N: 13116-022 Applications:- Most KZ650 models, 77-79
- KZ700
- ZN700
- KZ750B, 76-79
- Early KZ750 4-cylinder
- 76-77 KZ900A
- KZ900 LTD
- 73-75 Z1900
- KZ1000A 77-80
- KZ1000 LTD 77-80
- KZ1000 Police < 81
- 78 + 80 Z1R
- KZ1000 G (Z1 Classic)
- 79-81 KZ1300A
- 80 KZ1300B Touring
- May work on others
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13129-046 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E Shaft
- 1980 KZ1000-G1 Classic
-
Aftermarket sprocket from Sunstar Sunstar P/N 60515 Replaces Kawasaki P/N: 13144-046 or 13144-062 Applications:- 1973-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B LTD
- 77-80 Kz1000A
- 77-80 Kz1000B LTD
- 78 & 80 Kz1000D Z1R
- 78-81 Kz1000C Police
- 1980 Kz1000G Z1 Classic
-
Aftermarket Sprocket from Sunstar Replaces Kawasaki P/N: 13144-046 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1976 KZ900B LTD
- 1977-1980 KZ1000A
- 1977-1980 KZ1000B LTD
- 1978 and 1980 KZ1000D Z1R
- 1978-1981 KZ1000C Police
- 1980 KZ1000G Zl Classic
-
New Old Stock Genuine Kawasaki P/N: 13151-5003 Superseded P/N: 13151-022 Applications:- 76-77 KZ900
- 76 KZ900 LTD
- 77-99 KZ1000
-
Out of stock
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13161-029 Applications:- 76-77 KZ900
- KZ900 LTD
- KZ900 Police
- 73-75 Z1900
- 78+80 Z1R
- 80 KZ1000G, Z1 Classic
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- Early KZ1000 Police
-
Out of stock
Kawasaki Genuine Part ~ Used Very nice cover. Very minimal chain marks. Has some marking on the inside as shown as well. Includes one each Used Kawasaki P/N:- 14024-007 Transmission Cover
- 92049-004 Seal
- 92050-048 Seal
- 92050-024 Seal (SS P/N: 92049-1506)
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-78 KZ1000 A
- 77-78 KZ1000 LTD
- 78 Z1R
- Early KZ1000 Police
- Early KZ900 Police
- Early Z1 Police
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 14024-008 Sold as shown Applications:- 73-75 Z1 900
- 76-77 KZ900A
- KZ900 LTD
- Z1 Police
- KZ900 Police
-
Genuine Kawasaki Parts ~ Used This is correct for 1975 Z1 900 (Shift pattern numbers were stamped smaller) but will work on 1974 and up. Great part for the restored bike. Includes Kawasaki P/N:- 14026-026 Chain Cover (1)
- 14026-012 Inspection Cover
- 14045-012 Gasket
- 220B0612 Screws (2)
- 74-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
-
Kawasaki Genuine Part ~ Used, Polished Cover comes with gasket and seal. Kawasaki P/N's: 14032-075-2H (Cover - USED) 14046-025 (Gasket) 92049-001 (Seal) Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900 A
- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- 1977-1978 KZ1000 A
-
Out of stock
This is a very nicely polished, late edition clutch cover. It has some minor scratches from shelf life. This would be a perfect addition for your favorite bike. It is heavier in weight with more inside reinforcement than the earlier edition cover. Kawasaki Genuine Part ~ Used - Polished We believe this part was intended for the 77-78 KZ1000, as it has the heavy re-enforcement ribs inside as shown. Kit includes:- 14032-121 cover
- 52015-004 oil gauge window
- 14046-024 gasket
- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-78 KZ1000A
- 77-78 KZ1000B LTD
- 78 KZ1000C Police
- 78 KZ1000D Z1R
-
~ Quality Replacement Gasket ~ Made in Japan Replaces Kawasaki P/N: 14045-014 S/S P/N: 11060-1075 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 77-2001 KZ1000 POLICE
- 81-83 KZ1000 J Model
- 79-80 KZ1000 ST
- 81-82 KZ1000 CSR
- 84-85 KZ1100 LTD SHAFT
- 82-83 KZ1000 SPECTRE
- 81-82 KZ1000 GPZ
Item is eligible for free domestic shipping.
-
Reproduction Clutch Cover Gasket* Replaces Kawasaki P/N: 14046-024 Supersedes To PN: 11060-1529 Applications:- Z1 73 - 75
- KZ900A 76 - 77
- KZ900 LTD 1976
- KZ1000 LTD 77 - 80
- Z1R 78 & 80
- Z1 CLASSIC 1980
- KZ1000G 1980
- KZ1000ST 79 - 80
Item is eligible for free domestic shipping. * Color may differ.
-
Genuine Kawasaki ~ Used, Polished Kawasaki P/N: 14070-003 Application:- 1973-75 Z1-900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 76-79 KZ750B Twin
-
Nice polished kit for the clean bike, includes 4 gaskets. Kawasaki P/N's: (4) Cap 16005-027 (4) Gasket 16019-031 Applications:- 1976-1977 KZ900 A
- 1976 KZ900 LTD
- Early KZ1000 Police
- 1977-1980 KZ1000 A
- 1977-1980 KZ1000 LTD
- 1978 & 1980 Z1R
- 1979-1980 KZ1000 Shaft
- 1977-1979 KZ650
- 1977-1979 KZ650 Custom
- 1978-1979 KZ650 SR
- 1980 KZ650 LTD
- 1981 KZ650 CSR
-
Out of stock
Quality Made in Japan Gasket Set* Set of 4 *Color varies as we get these from different suppliers. Replaces KAWASAKI P/N: 16019-030 Superseded P/N: 11009-1563 Applications:- 78-79 KZ650 SR, KZ650D
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-79 KZ650B
- 77-79 KZ650C
- 78 & 80 Z1R
- 79-80 KZ1000E SHAFT
- 77-81 KZ1000 POLICE
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
-
Out of stock
Quality Made in Japan Gasket Set Set of 4 Replaces KAWASAKI P/N: 16019-031 Applications:- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 78 & 80 Z1R
- 79-80 KZ1000E SHAFT
- Early KZ650
-
New Reproduction Part Replaces Kawasaki P/N: 16046-002 Our P/N: 10125 Sold each Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-78 KZ1000A
- 77-80 KZ1000B LTD
-
New Old Stock Genuine Kawasaki P/N: 16054-003 Takes 4 per bike. Sold individually. Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- May also work on ZN1300 and KLX250
-
Quality Made Reproduction Replaces Kawasaki P/N: 11060-1074 Superseded Kawasaki P/N: 16112-002 Applications:- 1973-1975 Z1
- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 77-80 KZ1000
- 1978 & 1980 Z1R
- KZ1000 Police
- KZ1000J
- GPz1100
-
Quality reproduction part. Mfr P/N: 18-2453 Applications:- 76-77 KZ900
- 76 KZ900 LTD
-
~Set of 4~ Application:- 73-75 Z1 900
- 76-77 KZ 900A
- 1976 KZ 900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ 1000C Police
- 78 & 80 KZ 1000D Z1R
- 79-80 KZ 1000E Shaft
- 1980 KZ 1000-G1 Classic