- 79-80 KZ1000A MkII
- 79-80 KZ1000B LTD
- 79-81 KZ1000C Police
- 79 KZ650 B3, D2
- 80 KZ650 E1, F1
- 81 KZ650 H1
-
Quality replacement kit, made in Japan. MFR P/N: 18-2903 Replaces OEM P/N: 43028-1010 and 43028-1012 Applications: -
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Motor# KZT000JE032164 Parting out an 82 KZ1000J, offering this motor separately. No title. 27,000 miles. Charging system works, Good rotor, selling without the carbs. Motor, ignition, starter included. The bike has been sitting for years, but inside the motor was well preserved, as shown. No broken fins. No damage. Clutch not frozen up. Ignition was replaced, new clutch gasket, transmission is good. No smoke, no oil leaks. Sold as-is. Will ship dry. Watch video below to see it run. Applications:- KZ1000J
- KZ1000 CSR
- KZ1000 LTD
- KZ1000 Police
-
This is a rare, early production pedal boss. New Old Stock Kawasaki P/N: 13061-014 Superseded P/N: 13061-017 Applications- 1973-1975 Z1 900
- 1976-1977 KZ900 A
- 1977-1980 KZ1000 A
- 1977-1981 KZ1000 B
- 1978-1981 KZ1000 C Police
-
Genuine Kawasaki, reconditioned Kawasaki P/N: 43041-1013 Applications:- 1980 KZ1000D Z1R
- 1979-1980 KZ1000A MKII
- 1979-1981 KZ1000C Police
-
Out of stock
Genuine Kawasaki P/N: 41080-010 Resurfaced rotor with replated bolts and new locking tab washers. Date coded: 2H Kit Contains: (1) 41080-010 Rotor (4) 92001-158 Bolts (2) 92088-023 Locking Tab Washers Applications:- 1977-1978 KZ1000A
- 1978 KZ1000C Police
-
Out of stock
Nicely polished Front Sprocket Cover with Clutch Inspection Cover. Genuine Kawasaki, Used Kawasaki P/N: 14026-1017 Applications:- 1979-1980 KZ1000A MKII
- 1979-1980 KZ1000B LTD
- 1979-1981 KZ1000C Police
- 1980 KZ1000D Z1R
-
Made by Sunstar, P/N: 60617 Replaces Kawasaki P/N: 13144-1042 17-tooth sprocket. Applications:- 81-83 KZ1000J
- 81-82 KZ1000K LTD
- 81-82 KZ1000M CSR
- 82-2001 KZ1000P Police
- 82-83 KZ1000R Eddie Lawson Replica
- 81-82 KZ1100B GPZ
-
Replaces Kawasaki P/N: 43015-1016 Doremi P/N: 75-504 Applications:- 1979 KZ1000 MKII A3A
- 1979 KZ1000 Police C2
- May work on others
-
New Old Stock Genuine Kawasaki P/N: 13118-011 Combine with the outer part #13102-019 to complete the assembly. Applications:- 76-79 KZ750B
- 80 KZ750G
- 79-80 KZ1000A
- 79-80 KZ1000B LTD
- 79-81 KZ1000C Police
- 78-80 KZ1000D Z1R
- 81 KZ1100B GPZ
-
New Old Stock Genuine Kawasaki P/N: 13102-019 Combine with the outer part #13118-011 to complete the assembly. Applications:- 76-79 KZ750B
- 80 KZ750G
- 79-80 KZ1000A
- 79-80 KZ1000B LTD
- 79-81 KZ1000C Police
- 78-80 KZ1000D Z1R
- 81 KZ1100B GPZ
-
New Old Stock Genuine Kawasaki P/N: 46098-010 Applications:- 1973-1975 Z1 900
- KH250
- S1
- KH400
- H1
- KH500
- H2
- KZ650
- KZ750B
- KZ900
- 1977-1978 KZ1000
- 1977-1980 KZ1000 LTD
- KZ1000 Police (Early)
- 1978 Z1R
-
New Old Stock Genuine Kawasaki P/N: 23066-016 Applications:- 1976-1977 KZ900
- 1977-1980 KZ1000
- 1978-1981 KZ1000 Police
- 1973-1975 Z1
- and more
-
Used Genuine Kawasaki P/N's: 21007-1036 Rotor 13196-1006 Clutch Will fit:- 1982-1983 KZ1000R
- 1981-1983 KZ1000J
- 1981-1982 KZ1000K LTD
- 1981-1982 KZ1000M CSR
- 1982-1986 KZ1000 Police
- 1987-1990 KZ1000 Police
- 1991-1995 KZ1000 Police
- 1996-2000 KZ1000 Police
- 2001 KZ1000 Police
- 1981-1982 GPZ1100
- 1981-1983 KZ1100A
- 1983 KZ1100L1 LTD
- may fit others
-
Out of stock
Genuine Kawasaki, Used Contains the following Kawasaki P/N's: 14032-1015 Cover 14046-024 Gasket 52015-004 Sight Glass Applications:- 1979-1980 KZ1000 LTD
- 1978-1981 KZ Police
- 1978-1980 Z1R
- 1979-1980 MKII
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Aftermarket Sprocket from Sunstar Replaces Kawasaki P/N: 13144-046 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1976 KZ900B LTD
- 1977-1980 KZ1000A
- 1977-1980 KZ1000B LTD
- 1978 and 1980 KZ1000D Z1R
- 1978-1981 KZ1000C Police
- 1980 KZ1000G Zl Classic
-
New Old Stock Genuine Kawasaki P/N: 13102-013 Applications:- 1973-1975 Z1
- 1976-1977 KZ900
- 1974-1977 KZ400
- 1978 KZ400 A2
- 1977-1978 KZ1000
-
New Old Stock Genuine Kawasaki P/N: 92073-022 Applications:- 72-73 S2 350
- 76-77 KZ900A
- 78-80 KZ1000C Police
-
Genuine Kawasaki ~ Reconditioned Kawasaki P/N: 92037-093 Applications:- KZ1000J
- KZ1000 Police
- KZ1000 Shaft
- KZ1000G
- Z1
- KZ650
- KX125
- KZ1300
- Many more
-
Out of stock
Quality reproduction part Replaces OEM P/N: 43015-1009 Applications:- 77-79 KZ650B
- 78-79 KZ650C Custom
- 78-79 KZ650D
- 79-80 KZ1000A
- 78-80 KZ1000B LTD
- 78-80 KZ1000C Police
-
ZINC Re-plated Front Brake Caliper Shaft Bolts Includes Kawasaki P/N:- 43045-006 Bolts (2)
- 43040-004 Spacer (1)
- 76-77 KZ900 All
- 77-80 KZ1000 All
- 76-79 KZ750B Twin
- 77-79 KZ650 All
- Will fit others
-
Out of stock
These NOS stands came from an older inventory. There was some small damage from poor shelf life, so they have been freshly powder coated. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Out of stock
Quality reproduction exhaust collars. Set of 8. Replaces Kawasaki P/N: 92027-170 Applications:- 73-75 Z1 900
- 76-77 KZ900 All
- 77-80 KZ1000 All
-
Bike does run. Seat needs recovered 52,000 miles changed oil, filter and spark plugs. 1000 LTD carbs. No broken fins on cylinder or head. Could be a good motor for another police bike or street bike. Doesn’t smoke, could use some tuning. Tachometer and Speedometer are not working. Runs rough. Transmission is good, has all the gears. Goes into gear nicely, doesn’t seem to smoke. Charging system seems to be over-charging; regulator/rectifier is bad, but it is putting out of the stator, so it probably has a good flywheel. Side covers have tab broken off both right and left. We believe these to be original paint. Gas tank has rust inside. Fairing has the bracket on front and some extra holes where equipment has been mounted. Please give us a call with your needs. View movie for more details. -
New Old Stock Genuine Kawasaki P/N: 92027-1103 Applications:- KE100
- KM 100
- KE125
- KE175
- KE250
- KZ650
- 77-80 KZ1000A
- 77-80 KZ1000B
- May fit some KZ1000C Police
- 1980 KZ1000D / Z1R
- 79-80 KZ1000E Shaft
-
New Old Stock Genuine Kawasaki P/N: 92065-097 12 x 22 x 2 Applications:- KZ1000J Engines
- 82 and up KZ1000 Police
- Other uses
-
Quality reproduction part replaces OEM Kawasaki P/N: 43059-031 Applications:- 77-79 KZ1000A
- Early KZ1000 Police
- 79 KZ1000 LTD
-
Aftermarket sprocket from Sunstar Sunstar P/N 60515 Replaces Kawasaki P/N: 13144-046 or 13144-062 Applications:- 1973-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B LTD
- 77-80 Kz1000A
- 77-80 Kz1000B LTD
- 78 & 80 Kz1000D Z1R
- 78-81 Kz1000C Police
- 1980 Kz1000G Z1 Classic
-
Sale!
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 2) 43050-010 Applications:- 77-78 KZ1000A
- 1978 KZ1000P POLICE
-
New Old Stock Genuine Kawasaki P/N: 92028-122 Applications:- 78 and 80 Z1R
- Early KZ1000 Police
- 73-75 Z1 900
- KZ900
- KZ1000A
- KZ1000 MkII
-
Nice used camshaft set, includes sprockets and bolts, as shown. Genuine Kawasaki P/N's: 12044-014 Intake- Superseded from 12044-004
- Superseded from 12044-005
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 13151-1010 Applications:- 83-84 ZX1100 GPZ
- 01-05 KZ1000 Police
- 87-08 Vulcan VN1500 VN1600
-
New Old Stock Genuine Kawasaki P/N: 92081-1457 Applications:- 82-03 KZ1000 Police
- 81-83 KZ1100 KZ1100 Shaft / Spectre
- 81-83 KZ1000J
- 82-83 KZ750
- Many more
-
Replaces Kawasaki P/N: 92015-076 Set of 12, tapered style. Applications:- Mid 74-75 Z1 900
- KZ900
- KZ1000
- KZ1000 Police
- KZ750
- KZ650
- KZ440
- Many more
-
This kit contains all necessary OEM replacement parts to rebuild one front brake caliper assembly. Kit made in Japan. Our P/N: 32-1289 Replaces Kawasaki P/N:- (1) 43054-003 Dust Seal
- (1) 43049-002 Piston Seal Ring
- (4) 43052-005 Dust Boot
- (4) 43053-006 O-Ring
- (1) 43057-003 Bleeder Cap
- 1976-77 KZ900A
- 1977-80 KZ1000A
- 1979-80 KZ1000B LTD
- 80 KZ1000D Z1R
- 1979-81 KZ1000C Police
- 1980 KZ1000-G1 Classic
- 1979-80 KZ1000E Shaft
-
Powdercoated New Old Stock Includes:- Kawasaki P/N: 32100-100 (1) Band
- 92075-078 (4) Rubbers
- 77-78 KZ1000A
- 79-80 KZ1000 MkII
- 77-80 KZ1000 LTD
- 80 KZ1000 G (Z1 Classic)
- 78-80 Z1R
- Early KZ1000 Police
-
New Old Stock Genuine Kawasaki P/N: 49016-1016 Applications:- KZ1000J
- 78 and 80 Z1R
- KZ1000 Police
-
New Old Stock Genuine Kawasaki P/N: 92007-047 Applications:- 76-77 KZ900A
- 77-80 KZ1000A
- KZ900 LTD
- KZ1000 Police
- 78&80 Z1R
- KZ1000 LTD
- KH400
- GPZ550
- Will fit many others. Please check first.
-
New Kawasaki Genuine Shim ~ New Old Stock Kawasaki P/N: 12037-015 Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B Ltd
- 77-80 Kz1000A
- 77-80 Kz1000B Ltd
- 78-81 Kz1000C Police
- 78 & 80 Kz1000D Z1R
- 79-80 Kz1000E Shaft
- 1980 Kz1000-G1 Classic
- 81-83 Kz1000J
- 81-82 Kz1000K Ltd
- 81-82 Kz1000M CSR
- 82-83 Kz1000R Eddie Lawson Replica
- 81-83 Kz1100A Shaft
- 81-82 Kz1100B GPz
- 82-83 Kz1100D Spectre
-
New Old Stock Genuine Kawasaki P/N: 27011-018 Applications:- KE 175
- KL 250
- 80-81 KZ1000 Police
-
New Old Stock Genuine Kawasaki P/N: 92049-1003 Application:- KZ1000J
- KZ550
- KZ1000 Police
- KZ440
- Many others
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 44029-1029 Applications:- 82-90 KZ1000 Police
- 82 KZ750M CSR
- 81-82 KZ750E-2
-
Reproduction sprocket Replaces Kawasaki P/N: 42041-1058 +1 Tooth Applications:- 81-82 KZ1000 J
- 82-95 KZ1000 P
- 81 KZ1100 B1 GPZ
-
New Old Stock Genuine Kawasaki P/N: 42041-1058 Applications:- 81-82 KZ1000 J
- 82-95 KZ1000 P
- 81 KZ1100 B1 GPZ
-
Out of stock
Beautifully polished sprocket carrier. (Used/restored) Genuine Kawasaki P/N: 42008-040 Applications:- 79-80 KZ1000 MKII
- 77-80 KZ1000 LTD
- 80 KZ1000G | Z1 Classic
- Early KZ1000 Police
-
New Old Stock Genuine Kawasaki P/N: 92066-053 Superseded P/N: 92066-1174 Applications: Fits early GPZ 1100, KZ 1100A, KZ1000 Police using D motor, and many others. Check with dealer first.- KL 600
- KZ 650
- KZ 750
- ZX 750
- KZ 1000
- KZ 1100
- ZX 1100
-
New Old Stock Genuine Kawasaki P/N: 16031-031 Applications:- 76-77 KZ900A
- 79-80 KZ1000 MKII
- 77-80 KZ1000 LTD
- 78 and 80 Z1R
- 79-80 KZ1000 ST Shaft
- Early KZ900 and KZ1000 Police