-
Parting out this chassis. Front brake works. Charging system worked when it was running. Call with needs -
Bike does run. Seat needs recovered 52,000 miles changed oil, filter and spark plugs. 1000 LTD carbs. No broken fins on cylinder or head. Could be a good motor for another police bike or street bike. Doesn’t smoke, could use some tuning. Tachometer and Speedometer are not working. Runs rough. Transmission is good, has all the gears. Goes into gear nicely, doesn’t seem to smoke. Charging system seems to be over-charging; regulator/rectifier is bad, but it is putting out of the stator, so it probably has a good flywheel. Side covers have tab broken off both right and left. We believe these to be original paint. Gas tank has rust inside. Fairing has the bracket on front and some extra holes where equipment has been mounted. Please give us a call with your needs. View movie for more details. -
New Old Stock Genuine Kawasaki P/N: 92065-097 12 x 22 x 2 Applications:- KZ1000J Engines
- 82 and up KZ1000 Police
- Other uses
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 92055-048 D=18mm Applications:- Z1 900
- KZ750
- KZ1000 A
- KZ1000 LTD
- Z1R
- KZ1000 Police
- KZ400
-
Out of stock
Genuine Kawasaki ~ Reconditioned Part Kawasaki P/N: 33044-001 Applications:- 74-75 H2 750
- 73-75 Z1 900
- 76-77 KZ 900
- 1976 KZ 900 LTD
- 77-80 KZ1000 (All)
- *will fit others*
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92056-003 Sold as Shown Applications:- 73-75 Z1 900
- 76-77 KZ900 A
- 1976 KZ900 LTD
- 1980 KZ1000 G (Z1 CLASSIC)
- 78 & 80 Z1R
- 76-79 KZ750
- 78-81 KZ1000 POLICE
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 77-80 KZ650
-
Genuine Kawasaki Gasket New Old Stock Kawasaki P/N: 21166-001 Applications:- 73-75 Z1 900
- 76-77 KZ900 A
- 1976 KZ900 LTD
- 1976 KZ1000 Police
- 1976 KZ1000 J
- 1976 KZ1000 R
- 1976 GPZ1100
- will work on many more
-
New Old Stock Genuine Kawasaki P/N: 27011-018 Applications:- KE 175
- KL 250
- 80-81 KZ1000 Police
-
New Old Stock Genuine Kawasaki P/N: 92027-1103 Applications:- KE100
- KM 100
- KE125
- KE175
- KE250
- KZ650
- 77-80 KZ1000A
- 77-80 KZ1000B
- May fit some KZ1000C Police
- 1980 KZ1000D / Z1R
- 79-80 KZ1000E Shaft
-
New Kawasaki Genuine Shim ~ New Old Stock Kawasaki P/N: 12037-015 Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B Ltd
- 77-80 Kz1000A
- 77-80 Kz1000B Ltd
- 78-81 Kz1000C Police
- 78 & 80 Kz1000D Z1R
- 79-80 Kz1000E Shaft
- 1980 Kz1000-G1 Classic
- 81-83 Kz1000J
- 81-82 Kz1000K Ltd
- 81-82 Kz1000M CSR
- 82-83 Kz1000R Eddie Lawson Replica
- 81-83 Kz1100A Shaft
- 81-82 Kz1100B GPz
- 82-83 Kz1100D Spectre
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
NOS Kawasaki P/N: 92011-036 Applications:- 77-81 KZ1000 A, B
- 77-81 KZ1000 Police
-
NOS Kawasaki Kawasaki P/N: (4) 92012-003 Applications:- Z1 900
- KZ400, KZ440
- KZ550, KZ650,
- KZ750, KZ1000,
- KZ1100, KZ1300
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
QUALITY USA MADE Replaces Kawasaki P/N: 114B1025 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000C POLICE
- 80 KZ1000 G CLASSIC
- 72-75 F9
- 73-75 F11
- 70 F5
- 71 F81M
- 72 F8
Item is eligible for free domestic shipping.
-
New Old Stock Genuine Kawasaki P/N: 92049-1003 Application:- KZ1000J
- KZ550
- KZ1000 Police
- KZ440
- Many others
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Genuine Kawasaki Part; Press cut, 52mm The collars have been re-plated, so they will not all look exactly 100% the same. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G Z1 Classic
- 78 & 80 Z1R
- early KZ1000 Police
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
-
Genuine Kawasaki Part; Machine cut, 52mm . The collars have been re-plated, so they will not all look exactly 100% the same. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G Z1 Classic
- 78 & 80 Z1R
- early KZ1000 Police
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
-
Nice reconditioned OEM Genuine Kawasaki Part. Actual part may differ from photo due to reconditioning process. Kawasaki P/N: 46098-010 Applications:- 73-75 Z1 900
- KH 250
- S1
- KH 400
- H1
- KH 500
- H2
- KZ 650
- KZ 750B
- KZ900
- 77-78 KZ1000
- 77-80 KZ1000 LTD
- KZ1000 Police (early)
- 1978 Z1R
-
Kawasaki P/N: 11009-1210 SS P/N: 11060-1070 Applications:- 1981-1982 KZ1000J J1 J2
- 1981-1982 KZ1000 LTD
- 1981-1982 KZ1000 CSR
- 1982 and up KZ1000 Police
- 1982-1983 KZ1000R
- 1981-1984 GPZ1100
- KZ1100 D1 D2
- May fit others
-
Genuine Kawasaki ~ Reconditioned Kawasaki P/N: 33044-001 Applications:- 1974-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900
- 1976 KZ900 LTD
- 1977-1980 KZ1000 (All)
- May fit others
-
Kawasaki P/N's: 99996-1031 Lock Washer (1) - Superseded P/N: 92022-1351 32085-1101 Stopper (1) Our P/N: 99996-1031 Applications:- 1981-1982 KZ1000 J1, J2
- 1981-1982 KZ1000 K1, K2
- 1981-1982 KZ1000 M1, M2 (CSR)
- 1982-1986 KZ1000 P1-P5 (Police 1000)
- 1982 KZ1000 R1 (Eddie Lawson Replica)
- 1981-1982 KZ1000 B1, B2 (GPz)
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
New Old Stock Genuine Kawasaki P/N: 92066-053 Superseded P/N: 92066-1174 Applications: Fits early GPZ 1100, KZ 1100A, KZ1000 Police using D motor, and many others. Check with dealer first.- KL 600
- KZ 650
- KZ 750
- ZX 750
- KZ 1000
- KZ 1100
- ZX 1100
-
Genuine Kawasaki ~ Reconditioned Kawasaki P/N: 92037-093 Applications:- KZ1000J
- KZ1000 Police
- KZ1000 Shaft
- KZ1000G
- Z1
- KZ650
- KX125
- KZ1300
- Many more
-
New Old Stock Genuine Kawasaki P/N: 23066-016 Applications:- 1976-1977 KZ900
- 1977-1980 KZ1000
- 1978-1981 KZ1000 Police
- 1973-1975 Z1
- and more
-
Out of stock
Fits Police KZ1000 -
New Old Stock Genuine Kawasaki P/N: 92081-1457 Applications:- 82-03 KZ1000 Police
- 81-83 KZ1100 KZ1100 Shaft / Spectre
- 81-83 KZ1000J
- 82-83 KZ750
- Many more
-
Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92003-099 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
~Set of 4~ Application:- 73-75 Z1 900
- 76-77 KZ 900A
- 1976 KZ 900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ 1000C Police
- 78 & 80 KZ 1000D Z1R
- 79-80 KZ 1000E Shaft
- 1980 KZ 1000-G1 Classic
-
New Old Stock Genuine Kawasaki P/N: 92007-047 Applications:- 76-77 KZ900A
- 77-80 KZ1000A
- KZ900 LTD
- KZ1000 Police
- 78&80 Z1R
- KZ1000 LTD
- KH400
- GPZ550
- Will fit many others. Please check first.
-
~ Quality Replacement Gasket ~ Made in Japan Replaces Kawasaki P/N: 14045-014 S/S P/N: 11060-1075 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 77-2001 KZ1000 POLICE
- 81-83 KZ1000 J Model
- 79-80 KZ1000 ST
- 81-82 KZ1000 CSR
- 84-85 KZ1100 LTD SHAFT
- 82-83 KZ1000 SPECTRE
- 81-82 KZ1000 GPZ
Item is eligible for free domestic shipping.
-
Highest Quality Reproduction Replaces Kawasaki P/N: 2) 92001-143 Bolts 2) 315B1000 Nuts Application:- 74-75 Z1 10mm
- 78 & 80 Z1R
- 76-77 KZ900
- 74-75 H2 750
- KZ900 LTD
- KZ1000 POLICE
- KZ1000G CLASSIC
- 77-80 KZ1000A
- Many others
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 13151-1010 Applications:- 83-84 ZX1100 GPZ
- 01-05 KZ1000 Police
- 87-08 Vulcan VN1500 VN1600
-
Replaces Kawasaki P/N: 92071-056 Sold as shown, set of 6. Applications:- KT250
- S2 350
- S3
- KH400
- 73-75 H1 500
- 76 KH500
- KZ550
- KZ650
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-80 KZ1000 A
- 77-80 KZ1000 LTD
- KZ1000 POLICE
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
Genuine Kawasaki ~ New Old Stock Kawasaki P/N: 92037-093 Applications:- KZ1000J
- KZ1000 Police
- KZ1000 Shaft
- KZ1000G
- Z1
- KZ650
- KX125
- KZ1300
- Many more
-
Quality reproduction part made in Japan Replaces Kawasaki P/N: 26002-031 Applications:- 76-77 KZ900A
- KZ900 Police
- 73-75 Z1 900
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- KZ1000 Police (early)
-
Out of stock
This is a reconditioned original part, it has been freshly powder coated. Pad Length is 33mm. Kawasaki P/N: 32030-055 Superseded P/N: 32030-066 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police C2
- 1977-1978 KZ1000A
- 1977-1980 KZ1000 LTD
- 1980 KZ1000 G Z1 Classic
- 1980 KZ1000 Police, C1 C1A
-
New Kawasaki Genuine Part ~ New Old Stock P/N: 46044-013 Applications:- Early KZ1000 Police
- 77-78 KZ1000 LTD
- KZ900
- KZ900 LTD
- Z1 900
- 76-79 KZ750 B
- 74-75 H2 750
- 73-75 H1 500
- 1976 KH500
- Early KZ650
- KH400
- KZ400
- S1
- KH250
- KZ200
-
This is a reconditioned original part, it has been freshly powder coated. Kawasaki P/N: 32030-067 Applications:- 77-78 KZ1000A
- 77-79 KZ1000 LTD
- KZ1000 C1, C1A Police
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 23006-4004 Application:- KZ1000 Police
-
New Old Stock Genuine Kawasaki P/N: 49016-1016 Applications:- KZ1000J
- 78 and 80 Z1R
- KZ1000 Police
-
New Old Stock Genuine Kawasaki P/N: 46098-010 Applications:- 1973-1975 Z1 900
- KH250
- S1
- KH400
- H1
- KH500
- H2
- KZ650
- KZ750B
- KZ900
- 1977-1978 KZ1000
- 1977-1980 KZ1000 LTD
- KZ1000 Police (Early)
- 1978 Z1R
-
New Old Stock Kawasaki P/N: 13116-022 Applications:- Most KZ650 models, 77-79
- KZ700
- ZN700
- KZ750B, 76-79
- Early KZ750 4-cylinder
- 76-77 KZ900A
- KZ900 LTD
- 73-75 Z1900
- KZ1000A 77-80
- KZ1000 LTD 77-80
- KZ1000 Police < 81
- 78 + 80 Z1R
- KZ1000 G (Z1 Classic)
- 79-81 KZ1300A
- 80 KZ1300B Touring
- May work on others
