- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications: -
Out of stock
Nice chrome cover came from an older inventory we purchased. We estimate the chrome is about 20 years old. Very nice shape. OEM Kawasaki P/N: 14026-039-80 Comes with P/N: 14026-012 Chain oiler cover, as shown. Applications:- 77-78 KZ1000A
- 78 Z1R
- 77-78 KZ1000B (LTD)
-
This kit is for 77-80 KZ1000A, but will also work on Z1R, KZ1000A LTD or Z1 900. Cylinder head has been fitted with brand new cylinder sleeves from Wiseco. Includes 1015 Kit from Wiseco, piston 1-4, all marked, pistons, rings, pins, and clips, as well as gaskets. This is a bolt-on kit, ready to go. No broken fins on the cylinder. Applications:- 77-80 KZ1000A
- Z1R KZ1000A LTD
- Z1 900.
-
Quality reproduction part replaces OEM Kawasaki P/N: 43059-031 Applications:- 77-79 KZ1000A
- Early KZ1000 Police
- 79 KZ1000 LTD
-
Out of stock
Quality re-plated part. Contains OEM Kawasaki P/N: 53011-008 (Seat pin) 92041-003 (Cotter pin) Applications: Each bike takes 2 each- 73-75 KZ900
- KZ900 LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- May fit others
-
P/N: 0215-0040 Replaces P/N: 601B6206 Kit Contains:- 92050-027 Oil Seal
- 601B6206 Bearing
- 601B6304 Rear Wheel Bearing (2)
- 92052-006 Rear Wheel Oil Seal
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 78-80 Z1R
- Will fit others
-
Aftermarket sprocket from Sunstar Sunstar P/N 60515 Replaces Kawasaki P/N: 13144-046 or 13144-062 Applications:- 1973-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B LTD
- 77-80 Kz1000A
- 77-80 Kz1000B LTD
- 78 & 80 Kz1000D Z1R
- 78-81 Kz1000C Police
- 1980 Kz1000G Z1 Classic
-
Quality reproduction gasket. Replaces OEM Kawasaki P/N: 14058-004 Applications:- 73-75 Z1 900
- 77-79 KZ1000A
- 77-79 KZ1000 LTD
- 78 KZ1000D / Z1R
-
Genuine Kawasaki Part ~ Used Kawasaki P/N: 21163-008 *30 day warranty for the lower 48 states Applications:- 77-78 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 80 KZ1000G CLASSIC
-
Genuine Kawasaki P/N: 33028-011 Applications:- 75 G3SSE
- 76-77 KH100
- 76-77 KZ900
- 76 KZ900
- 73-75 Z1 900
- 77-78 KZ1000B LTD
- 80 KZ1000G
-
Set made of quality reproduction parts. Includes OEM P/N 44043-044 Washer (2) and 44044-012 Circlip (2) Applications:- 73-75 Z1 900
- 77-80 KZ1000A
- 73-75 H1 500
- 72 H1B
- 76-77 KZ900
- 77 KZ1000 LTD
- Z1R | KZ1000D
- H2 750
- KZ650
- KZ750 B
- May fit others
-
Powdercoated OEM Kawasaki P/N: 34003-037 Applications:- KZ900A
- 77-80 KZ1000A
- 78 Z1R
- 77-80 Kz1000 LTD
- KZ1000 G
- Will fit Z1 900
-
Out of stock
We had this sprocket re-plated, as it was looking dull. 35 TOOTH Part # 42041-169 & 42041-1010 Applications:- 77-80 KZ1000LTD
- 1980 KZ1000G Z1 Classic
- 77-78 KZ1000A
- KZ750L3
- KZ750E
-
New Old Stock Genuine Kawasaki P/N: 92046-1035 Applications:- 82-83 KZ1000R
- 81-82 KZ1000K LTD
- 81-83 KZ1000J
- Many more
-
Genuine Kawasaki OEM P/N: 13031-1046 Applications:- 81-83 KZ1000J
- 81-82 KZ1000K LTD
- 82-83 KZ1000R Eddie Lawson Replica
-
This kit contains all necessary OEM replacement parts to rebuild one front brake caliper assembly. Kit made in Japan. Our P/N: 32-1289 Replaces Kawasaki P/N:- (1) 43054-003 Dust Seal
- (1) 43049-002 Piston Seal Ring
- (4) 43052-005 Dust Boot
- (4) 43053-006 O-Ring
- (1) 43057-003 Bleeder Cap
- 1976-77 KZ900A
- 1977-80 KZ1000A
- 1979-80 KZ1000B LTD
- 80 KZ1000D Z1R
- 1979-81 KZ1000C Police
- 1980 KZ1000-G1 Classic
- 1979-80 KZ1000E Shaft