- 77 - 80 KZ1000A
- 77 - 80 KZ1000 LTD
- 78 + 80 Z1R
- Early KZ1000 Police
-
Out of stock
Kawasaki P/N: 42032-071 Applications: -
Kawasaki P/N: 53058-003 Powdercoated OEM Bracket Applications:- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-78 KZ1000 A
- 77-80 KZ1000 LTD
- 80 KZ1000 G (Z1 Classic)
-
We install these on all of our KZ and Z1 restorations New aftermarket replacement part Replaces Kawasaki P/N: 21066-019 Our P/N: 10-515 NO CONNECTORS Applications:- 73-75 Z1 900
- 76 KZ900
- KZ900 LTD
- 79-81 & 82 KZ1300
- 1978 Z1R
- 77-78 KZ1000A
- 77-78 KZ1000 LTD
- 98-99 ZX9
-
Kawasaki P/N: 92066-1051 Applications:- KZ1000J
- KZ440
- ZG1000 Concours
- KZ1000 CSR
- 81-82 KZ1000 LTD
- ZX750
- KL650
- ZX600
- Many more
-
NOS Kawasaki P/N: 92065-103 Applications:- 76-79 KZ900
- 79-81 KZ1300
- 78 + 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- Many more
-
NOS Kawasaki P/N: 92011-036 Applications:- 77-81 KZ1000 A, B
- 77-81 KZ1000 Police
-
This is a reconditioned original part, it has been freshly powder coated. Kawasaki P/N: 32030-067 Applications:- 77-78 KZ1000A
- 77-79 KZ1000 LTD
- KZ1000 C1, C1A Police
-
Out of stock
See parts #21 and #22 in the diagram. Contains Kawasaki P/N's: (1) 92066-024 Plug (1) 670B1508 O-Ring Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1976 KZ900B LTD
- 1977-1978 KZ1000A
- 1977-1978 KZ1000B LTD
- 1978 KZ1000C Police
- 1978 KZ1000D Z1R
- 1976-1979 KZ750B
- 1980 KZ750G1 LTD
- 1983-1984 KZ750K
- 1982 KZ750M1 CSR Twin
-
Genuine Kawasaki Parts ~ Used Give your project a nice added touch! Triple clamp has been freshly powder coated & includes new bolts that we have manufactured here in the U.S. Semigloss Black Powder Coated. Sold as shown. Includes Kawasaki P/N: 44039-073 Upper Triple Clamp Kawasaki 46012-008 Top Clamps (qty 2) 44041-048 Triple Clamp Pinch Bolts (qty 2) 44041-038 Steering Stem Bolt (qty 1) 92020-007 Steering Stem Nut (qty 1) 410B0800 Washer (qty 1) 461F0800 Spring Washer (qty 7) 92007-002 Bolts (qty 4) Applications:- 76-77 KZ900 A
- 1976 KZ900 LTD
- KZ900 C2 Police
- 77-80 KZ1000
- 77-80 KZ1000 LTD
- 1980 KZ1000 G (Z1 Classic)
-
Out of stock
(Set of 2) Fresh powder coat, select desired finish Kawasaki P/N: 46012-008 Applications:- 73-75 Z1 900
- 76-77 KZ 900
- 76 KZ 900 (LTD)
- 77-80 KZ 1000
- 77-80 KZ 1000 (LTD)
- 72-75 H1 500
- 69 H1 500 (MACH III)
- 72 H2 750 (MACH IV)
- 74-75 H2 750 (MACH IV)
- 73-75 F11
- 71-73 F6
- 71-75 F7
- 71-72 F8
- 72-75 F9
- Many others
-
Replaces Kawasaki P/N: 43015-033 Doremi P/N: 75-502 Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD KZ1000B
- 1978 KZ1000 Police C1, C1A
-
Quality reproduction part, made in Japan Doremi P/N: 50087 Replaces Kawasaki P/N: 26004-1006 Applications:- 79-80 KZ1000 MKII
- KZ1000 G
- 80 Z1R / KZ1000D
- 79-80 KZ1000 LTD
- Will fit others
-
Quality reproduction part made in Japan Doremi P/N: 10279 Replaces Kawasaki P/N: 26011-063 Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900B LTD
- 77-78 KZ1000A
- 77-82 KZ1000 LTD
- 78-80 Z1R
- 79-80 KZ1000 E SHAFT
- 80 KZ1000 G CLASSIC
- 81-82 KZ1000 CSR
- 79-81 KZ1300
- 76-81 KM100
- 81 KZ250D CSR
- 82 KZ250L CSR belt
- 83 KZ250W LTD belt
- 81-82 KZ305 A CSR
- 82 KZ305 B CSR belt
- 78-79 KZ400 B
- 78 KZ400 C
- 79 KZ400 H
- 80-83 KZ440 A LTD
- 80-81 KZ440 B
- 80-83 KZ440D LTD belt
- 82 KZ440 G
- 77-79 KZ650 B
- 77-79 KZ650 C CUSTOM
- 78-79 KZ650 D SR
- 80 KZ650 E LTD
- 80 KZ650 F
- 81-83 KZ650 H CSR
- 76-79 KZ7502 B
- 80-82 KZ750 E
- 80 KZ750 G LTD II
- 80-83 KZ750 H LTD
- 83 KZ750 K LTD belt
- 84 KZ750 K (Canada only)
- 82 KZ750 M CSR Twin
- 74-75 MC1
-
New Old Stock Kawasaki P/N: 13116-022 Applications:- Most KZ650 models, 77-79
- KZ700
- ZN700
- KZ750B, 76-79
- Early KZ750 4-cylinder
- 76-77 KZ900A
- KZ900 LTD
- 73-75 Z1900
- KZ1000A 77-80
- KZ1000 LTD 77-80
- KZ1000 Police < 81
- 78 + 80 Z1R
- KZ1000 G (Z1 Classic)
- 79-81 KZ1300A
- 80 KZ1300B Touring
- May work on others
-
New Kawasaki Genuine Part ~ New Old Stock P/N: 46044-013 Applications:- Early KZ1000 Police
- 77-78 KZ1000 LTD
- KZ900
- KZ900 LTD
- Z1 900
- 76-79 KZ750 B
- 74-75 H2 750
- 73-75 H1 500
- 1976 KH500
- Early KZ650
- KH400
- KZ400
- S1
- KH250
- KZ200
-
Out of stock
This is a reconditioned original part, it has been freshly powder coated. Pad Length is 33mm. Kawasaki P/N: 32030-055 Superseded P/N: 32030-066 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police C2
- 1977-1978 KZ1000A
- 1977-1980 KZ1000 LTD
- 1980 KZ1000 G Z1 Classic
- 1980 KZ1000 Police, C1 C1A
-
Out of stock
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13161-029 Applications:- 76-77 KZ900
- KZ900 LTD
- KZ900 Police
- 73-75 Z1900
- 78+80 Z1R
- 80 KZ1000G, Z1 Classic
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- Early KZ1000 Police
-
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 12055-002 Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 78+80 Z1R
- 79-80 KZ1000E
- 80 KZ1000G Z1 Classic
- 75-81 KzZ1000 Police
-
Quality reproduction part made in Japan Replaces Kawasaki P/N: 26002-031 Applications:- 76-77 KZ900A
- KZ900 Police
- 73-75 Z1 900
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- KZ1000 Police (early)
-
Out of stock
This would be a great part for your original bike. Does have small damage, as shown. Kawasaki P/N: 25023-015 Superseded P/N: 25023-1006 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- 1977-1980 KZ1000A
- 1976-1979 KZ750B
- Early KZ650
-
Out of stock
Set of 4 Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92075-293 Applications:- 77-80 KZ1000 LTD
- 76-79 KZ750B
- 79-80 KZ1000E
- KZ650 and more
-
Out of stock
Quality Made in Japan Gasket Set Set of 4 Replaces KAWASAKI P/N: 16019-031 Applications:- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 78 & 80 Z1R
- 79-80 KZ1000E SHAFT
- Early KZ650
-
Quality Made in Japan Gasket Set* Set of 4 *Color varies as we get these from different suppliers. Replaces KAWASAKI P/N: 16019-030 Superseded P/N: 11009-1563 Applications:- 78-79 KZ650 SR, KZ650D
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-79 KZ650B
- 77-79 KZ650C
- 78 & 80 Z1R
- 79-80 KZ1000E SHAFT
- 77-81 KZ1000 POLICE
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
-
Quality Japanese manufactured part Our P/N: 10607 Replaces P/N: 12053-001 Superseded # 12053-019 Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 80 KZ1000G / Z1 Classic
- 78 and 80 Z1R
- KZ1000 Police up to 81
- 79-80 KZ1000E
-
Kit consists of:- 2) 46012-008 Holders, fresh powder coat (select finish)
- 4) 92007-002 Bolt
- 4) Washers
- 73-75 Z1 900
- 76-77 KZ 900
- 76 KZ 900 (LTD)
- 77-80 KZ 1000
- 77-80 KZ 1000 (LTD)
- 72-75 H1 500
- 69 H1 500 (MACH III)
- 72 H2 750 (MACH IV)
- 74-75 H2 750 (MACH IV)
- 73-75 F11
- 71-73 F6
- 71-75 F7
- 71-72 F8
- 72-75 F9
- Many others
-
Nice polished kit for the clean bike, includes 4 gaskets. Kawasaki P/N's: (4) Cap 16005-027 (4) Gasket 16019-031 Applications:- 1976-1977 KZ900 A
- 1976 KZ900 LTD
- Early KZ1000 Police
- 1977-1980 KZ1000 A
- 1977-1980 KZ1000 LTD
- 1978 & 1980 Z1R
- 1979-1980 KZ1000 Shaft
- 1977-1979 KZ650
- 1977-1979 KZ650 Custom
- 1978-1979 KZ650 SR
- 1980 KZ650 LTD
- 1981 KZ650 CSR
-
Out of stock
Brush finish. Set of 2. Some have lower bracket as shown for fender brace, and some do not. Kawasaki uses the same part number for both versions. Consists of:- 1) 44005-1001 Left Hand Outer Tube
- 1) 44006-1001 Right Hand Outer Tube
- 2) 220B0408A Screws
- 2) 44045-002 Drain gaskets
- 2) 44049-024 Fork seals
- 2) 44010-032 Dust shields
- 2) 44043-044 Washers
- 2) 44044-012 Circlip
- 78 KZ1000A
- 77-80 KZ1000 LTD
- 80 KZ1000G, Z1 Classic
- 78-79 KZ750B
- 78-79 KZ650B
-
Out of stock
Freshly powder coated Genuine Kawasaki P/N: 44037-1015 Kit includes: 44037-1015 clamp (1) 92003-064 Bolts (2) 461F 1200 Washer (2) Applications:- 80 KZ1000G Z1 Classic
- 79-80 KZ1000A
- 79-80 KZ1000 LTD
-
Out of stock
Kawasaki P/N: 25008-1005 Replaces Kawasaki P/N: 25008-045 Applications:- KZ1000 G1 (Z1 Classic)
- KZ650 B
- KZ650 C
- KZ650 D
- KZ750 B
- KZ900 LTD
- 1976-1977 KZ900 A
- 1977-1980 KZ1000 A
- 1977-1980 KZ1000 LTD
-
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41078-008 Kit Includes:- 41062-005 Speedometer Cable Bushing
- 41063-001 Thrust Washer (2)
- 41060-017 Speedometer Pinion
- 41082-001 Spring Pin
- 41064-013 Speedometer Gear Receiver
- 654A304208 Oil Seal
- 41059-028 Speedometer Gear
- KH400
- KH500
- KZ650
- KZ750 B 76-79
- KZ900 76-77
- KZ900 LTD
- KZ900 Police
- KZ1000 A 77-78
- KZ1000 LTD 77-79
- *May Fit Others*
-
Nice polished breather cover with 92055-052 O-ring Applications:- 77-78 KZ1000A
- 78-80 KZ1000A
- 76-79 KZ750B
- 78+80 Z1R
- 80 KZ1000G, Z1 Classic
- 79-80 KZ1000E Shaft
- (Early) KZ1000 Police
-
Out of stock
Great reconditioned part. Kawasaki P/N's: Bracket 32049-101 Grommet 92071-056 Applications:- 1977-1978 KZ1000A
- 1977-1980 KZ1000B LTD
- 1978-1980 KZ1000C Police
- 1980 KZ1000G Classic
-
Out of stock
Quality Reproduction Part Replace Kawasaki P/N: 43024-004 Our P/N: 60102 Applications:- 1979-1981 KZ1300
- 1978-1980 Z1R
- 1977-1980 KZ1000A
- 1977-1980 KZ1000 LTD
- 1978-1980 KZ1000 Police
- Will fit others
-
Out of stock
Kawasaki Genuine Part ~ Used Very nice cover. Very minimal chain marks. Has some marking on the inside as shown as well. Includes one each Used Kawasaki P/N:- 14024-007 Transmission Cover
- 92049-004 Seal
- 92050-048 Seal
- 92050-024 Seal (SS P/N: 92049-1506)
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-78 KZ1000 A
- 77-78 KZ1000 LTD
- 78 Z1R
- Early KZ1000 Police
- Early KZ900 Police
- Early Z1 Police
-
Out of stock
New Old Stock. Sold as a set of 2 Applications:- 82-83 KZ 1000R
- 81-82 KZ 1000J
- 81-82 KZ 1000 LTD
- 81-82 KZ 1000 CSR
- KZ 1000P 1-P3
-
Out of stock
This is a very nice polished, early edition clutch cover. Has some minor scratches from shelf life. This would be a perfect addition for your favorite bike. It is lighter in weight than the late model cover. We believe this is for 73-76 because of the thinner ribs on the inside. Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 76 Kz900B LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 14032-082 cover (supersedes to 14032-121)
- 52015-004 oil gauge window
- 14046-024 gasket
-
Replaces Kawasaki P/N: 43015-018 Applications:- 1973-1975 Z1 900 using dual disc
- Can be used on most vintage motorcycles using dual disc including KZ1000 LTD and KZ900 LTD
-
Set of 4 Kawasaki P/N: 18069-1015 Applications:- 1981-1982 KZ1000 LTD, KZ1000J, KZ1000 CSR, KZ1000 Police using J motor
- 1981-1983 KZ1100A
- 1984-1985 ZN1100 B1 B2
- 1973-1975 Z1 900 and 1977-1980 KZ1000 Custom Application
-
Out of stock
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41078-1012 Applications:- KZ650-E1
- KZ650-F1
- KZ750-G1
- KZ1000-A4 (1980)
- KZ1000-B4 (LTD) (1980)
- KZ1000-D3/Z1R (1980)
- KZ1000-G1 (Z1 Classic)
-
Genuine Kawasaki ~ Used Cases are in good shape except for a crack and missing pin, as shown. We took these off a 1977 and they have a good VIN. Location: Farm -
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 92027-1177 Sold as shown Applications:- 79-80 KZ1000 LTD
- 80 KZ1000G (Z1 Classic)
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 42032-071 Sold as shown Applications:- 77 - 80 KZ1000A
- 77 - 80 KZ1000 LTD
- 78 + 80 Z1R
- Early KZ1000 Police
-
Good quick fix for meters that have been dented, or flaking Our P/N: 58-12410 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- May fit others
-
Includes P/N 25012-023 Speedometer Cover 25012-024 Tachometer Cover Our P/N: 58-85100 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- KZ1000 77-78
- Z1 900 73-75
- May fit others
-
Genuine Kawasaki Part Length 31mm Collars have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 92027-160 -
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
Out of stock
Genuine Kawasaki Part ~ Freshly powder coated Kawasaki P/N: 46094-019 Applications:- 77-80 KZ 1000 A
- 77-80 KZ 1000 LTD
- 78-81 KZ 1000 C
- 78-80 KZ 1000 D Z1R
- 76-79 KZ 750 B
- 77-79 KZ 650
- Will fit others
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police