- 73-75 Z1 900
- 78 & 80 Z1R
- 76-77 KZ 900A
- 76 KZ 900 LTD
- 77-80 KZ 1000 LTD
- KZ 1000G Z1 Classic
-
Left Engine Cover Stater Replacement Grommet Applications: -
QUALITY USA MADE Replaces Kawasaki P/N: 114B1025 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000C POLICE
- 80 KZ1000 G CLASSIC
- 72-75 F9
- 73-75 F11
- 70 F5
- 71 F81M
- 72 F8
Item is eligible for free domestic shipping.
-
Genuine Kawasaki - Used Early edition- shaft is half hollow, as shown. Kawasaki P/N: 13066-029 Kickstart Shaft 13078-011 Kickshaft Ratchet 13068-028 Kickstarter Gear 92028-126 Kickshaft Collar Applications:- KZ750 B
- KZ900 A
- KZ900 LTD
- Z1 900
- 77 KZ1000 LTD
- 77 KZ1000 A
Item is eligible for free domestic shipping.
-
~ Quality Replacement Gasket ~ Made in Japan Replaces Kawasaki P/N: 14045-014 S/S P/N: 11060-1075 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 77-2001 KZ1000 POLICE
- 81-83 KZ1000 J Model
- 79-80 KZ1000 ST
- 81-82 KZ1000 CSR
- 84-85 KZ1100 LTD SHAFT
- 82-83 KZ1000 SPECTRE
- 81-82 KZ1000 GPZ
Item is eligible for free domestic shipping.
-
Out of stock
Genuine Kawasaki ~ Reconditioned Part Kawasaki P/N: 33044-001 Applications:- 74-75 H2 750
- 73-75 Z1 900
- 76-77 KZ 900
- 1976 KZ 900 LTD
- 77-80 KZ1000 (All)
- *will fit others*
-
This is an exact replica of the original master cylinder ribbed rubber dust cover. Replaces Kawasaki P/N: 43069-001 Our P/N: 11224 Applications:- 73-75 Z1 900
- 76-77 KZ900 A
- 1976 KZ900 LTD
- EARLY KZ400
- 77-78 KZ1000 LTD
- EARLY KZ1000 POLICE
- Will fit others
-
This is an exact replica of original. Kawasaki P/N: 51059-008 Our P/N: 10077 Applications:- 73-75 Z1 900
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 1980 KZ1000 G1 (Z1 Classic)
- 76-77 KZ900 A
- 1976 KZ900 LTD
- 1976 H2 750
- 1976 KZ650
- 72-75 H1 500, KH500, KH400, S2 350, KZ400
- Many more
-
Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92003-099 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
NOS Clutch Cable Clamp. This is the guide that bolts to the triple clamp on the left side for the clutch cable. Kawasaki P/N: 92037-090 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 1980 KZ1000-G1 Classic
- 76-79 KZ750B
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92056-003 Sold as Shown Applications:- 73-75 Z1 900
- 76-77 KZ900 A
- 1976 KZ900 LTD
- 1980 KZ1000 G (Z1 CLASSIC)
- 78 & 80 Z1R
- 76-79 KZ750
- 78-81 KZ1000 POLICE
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 77-80 KZ650
-
Quality Japanese Made Part for Kawasaki Kawasaki P/N: (1) 92066-026 Plug & (1) 670B1508 O-ring Plug P/N superseded by 92001-1183 Magnetic Drain Plug Application:- 77-78 KZ1000LTD
- 77-78 KZ1000 POLICE
- 76-77 KZ900A
- 1976 KZ900LTD
- 73-75 Z1900
- 77-78 Kz1000A
- 1978 Z1R
- 74-77 KZ400
- may fit others
-
Replaces Kawasaki P/N: 92071-056 Sold as shown, set of 6. Applications:- KT250
- S2 350
- S3
- KH400
- 73-75 H1 500
- 76 KH500
- KZ550
- KZ650
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-80 KZ1000 A
- 77-80 KZ1000 LTD
- KZ1000 POLICE
-
Cam Chain Guide Roller Rubbers Quality Japanese Made Part for Kawasaki Replaces Kawasaki P/N: 92075-232 Our P/N: 10992 Sold as Shown (set of 4) Applications:- 73-75 Z1 900
- 76-77 KZ 900
- 1977 KZ 900 LTD
- 78&80 Z1R
- 77-80 KZ1000
- 77-80 KZ1000 LTD
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
Out of stock
This part has been given a powder coat finish by ACE Powder Coating. Nice, original used powder coated right front engine mount! Applications:- 76-77 KZ900A
- 1976 KZ900 LTD
- KZ900 Police
- 73-75 Z1 900
- 81 and down KZ1000 Police
- 77-80 KZ1000A
- 78 & 80 Z1R
- KZ1000G (Z1 Classic)
- 77-80 KZ1000 LTD
-
High Quality Reproduction Part Made in the U.S.A.Replaces Kawasaki P/N: 42045-018 Nut 18mm 550D4035 PinApplications- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 72-75 H2 750 Triple
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 76-79 KZ750B
-
Genuine Kawasaki Part; Press cut, 52mm The collars have been re-plated, so they will not all look exactly 100% the same. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G Z1 Classic
- 78 & 80 Z1R
- early KZ1000 Police
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
-
Genuine Kawasaki Part; Machine cut, 52mm . The collars have been re-plated, so they will not all look exactly 100% the same. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G Z1 Classic
- 78 & 80 Z1R
- early KZ1000 Police
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Out of stock
New Kawasaki Genuine Part ~ NOS Application- KZ650
- 76-79 KZ750 B1-B4
- KZ900 ALL
- Z1 ALL
- KZ1000 POLICE C4A
- 77-78 KZ1000B
- 77-78 KZ1000A
- 77-78 B1/B2A
- 77-78 C1/C2
- 1978 D1
- KZ1000 POLICE
- C1/C1A/C2/C3
-
New Old Stock Will fit:- 1976 KH500
- 73-75 Z1900
- 76-77 KZ900
- 1976 KZ900 LTD
- 78+80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000LTD
- 78-81 KZ1000 Police
- 81-82 KZ1000 CSR
-
Kawasaki P/N: 92027-1225 -
Top of the line American Made Bolts with Washers. Bolt size: 12 x 36 Replaces Kawasaki P/N 92003-064 (2 bolts) Replaces Kawasaki P/N 461F1200 (2 washers) Applications:- 72-75 H2 750
- 73-75 Z1 900
- 1980 KZ1000 G1 Z1 Classic
- 77-80 KZ1000 A
- 77-80 KZ1000 LTD
- 1976 KZ900 LTD
- 76-77 KZ900 A
- 76-79 KZ750 B
- 73-75 H1 500
- KH500 A
- F9 350
- KE250
-
New Old Stock Kawasaki P/N: 92022-244 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
- 1980 KZ1000-G1 CLASSIC
-
Footrest bar cap. Sold as a set of 4 Quality part made in the USA Replaces Kawasaki P/N: 92102-010 Applications:- Z1 900
- KZ900 LTD
- KZ900A
- Z1R
- KZ1000A 77-80
- KZ1000LTD 77-80
- KZ750B 76-79
- KZ650
-
Chrome plated, set of 16 Replaces Kawasaki P/N: 92003-092 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ 900A
- KZ900B, LTD
- 1977-1978 KZ1000A
- KZ1000B, LTD
- 1978 Z1R
-
Kawasaki Genuine Part ~ Replated Kawasaki P/N: 92003-098 Applications:- 1977-1980 KZ1000
- 1980 KZ1000G CLASSIC
- 1977-1980 KZ1000 LTD
- 1976-1979 KZ750
- 1978-1981 KZ1000 POLICE
- 1980 KZ750 G LTD II
- 1978 & 1980 Z1R
- 1983 KZ750 LTD BELT
- 1979-1980 KZ1000 SHAFT
- 1976-1977 KZ900
- 1976 KZ900 LTD
- 1982 CSR
- 1973-1975 Z1
-
~Set of 4~ Application:- 73-75 Z1 900
- 76-77 KZ 900A
- 1976 KZ 900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ 1000C Police
- 78 & 80 KZ 1000D Z1R
- 79-80 KZ 1000E Shaft
- 1980 KZ 1000-G1 Classic
-
Highest quality reproduction Japanese made fork dust shields. Sold as set of 2 Replaces Kawasaki P/N: 44010-032 Applications:- 77-80 KZ1000 G (Z1 Classic)
- 77-80 KZ1000 A3
- 77-80 KZ1000 LTD
- 78&80 Z1R
- 76-77 KZ900 A
- 76-79 KZ750 B
- 74-76 KX250
- KZ900 LTD
- KZ650
- KH500
- KX400
- KXT250 A2 Tecate
-
Quality aftermarket front wheel seal Replaces Kawasaki P/N: 654A254008 Applications:- 73-75 H1 500
- 76-78 KH400 A3-A5
- 1976 KH500 A8
- 77-80 KZ1000 A1-A4, A3A
- 77-80 KZ1000 B1-B4 LTD
- 78 & 80 KZ1000 D1, D3 (Z1R)
- 79-80 KZ1000 E1-E2 Shaft
- 78-79 KZ400 B1-B2
- 77-79 KZ650 B1-B3, B2A
- 77-79 KZ650 C1-C3 (Custom)
- 78-79 KZ650 D1-D2, D1A (SR)
- 1980 KZ650 E1 LTD
- 1980 KZ650 F1
- 76-79 KZ750 B1-B4
- 1980 KZ750 G1 (LTD II)
- 76-77 KZ900 A4-A5
- 1976 KZ900 B1 LTD
-
Out of stock
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 1) 92001-113 BOLT 1) 92022-244 WASHER Application- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
- 1980 KZ1000-G1 CLASSIC
-
Quality reproduction part Made in U.S.A. Sold as shown, set of 3 Replaces Kawasaki P/N: 92088-007 Applications:- 69-75 H1 500
- 76 KH 500
- 76-79 KZ750B
- 77-80 KZ1000A
- 77-80 KZ1000LTD
- Early KZ1000 Pocket
- 77-80 KZ650
- Will fit others
-
Exact replica, quality parts made in USA Zinc Replaces Kawasaki P/N: 92102-010 (Cap) Replaces Kawasaki P/N: 92019-013 (Nut) Sold in sets of four (4 caps and 4 nuts) OUR P/N: 92102-010KCOMP APPLICATIONS:- Z1 900
- KZ900 LTD
- KZ900A
- Z1R
- KZ650
- KZ750B 76-79
- KZ1000LTD 77-80
- KZ1000A 77-80
-
Kawasaki Genuine Part ~ Used, Polished Cover comes with gasket and seal. Kawasaki P/N's: 14032-075-2H (Cover - USED) 14046-025 (Gasket) 92049-001 (Seal) Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900 A
- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- 1977-1978 KZ1000 A
-
Genuine Kawasaki Part ~ Used - Powder Coated Gloss Black This is a very nice air cleaner stay. It has been freshly powder coated by Ace Powder Coating! Kawasaki P/N: 32105-007 Applications: 77-80 KZ1000 A (KZ1000) 77-80 KZ1000 B (KZ1000 LTD) 78-81 KZ1000 C (Police 1000) 1978 KZ1000 D1 (Z1R) 1980 KZ1000 D3 (Z1R) -
Kawasaki Genuine Part ~ Used - Polished KAWASAKI P/N: 14032-083 Kit Includes: 11060-1071 GASKET (new) 92050-047 SEAL (used) Applications:- 73-75 Z1 900
- 76-77 KZ900 A
- 78 & 80 Z1R
- 77-80 KZ1000 All
-
OEM Kawasaki Genuine Part Kawasaki P/N: 25024-006 Applications:- 77-80 KZ1000 A
- 77-80 KZ1000 LTD
- 78-81 KZ1000 Police
- 77-79 KZ650 B
- 77-79 KZ650 Custom
- 78-79 KZ650 SR
- 1980 KZ650 E1 LTD
- 76-79 KZ750 B
- 76-77 KZ900 A
- 1976 KZ900 LTD
- *Will Fit Others*
-
Out of stock
This is a very nicely polished, late edition clutch cover. It has some minor scratches from shelf life. This would be a perfect addition for your favorite bike. It is heavier in weight with more inside reinforcement than the earlier edition cover. Kawasaki Genuine Part ~ Used - Polished We believe this part was intended for the 77-78 KZ1000, as it has the heavy re-enforcement ribs inside as shown. Kit includes:- 14032-121 cover
- 52015-004 oil gauge window
- 14046-024 gasket
- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-78 KZ1000A
- 77-78 KZ1000B LTD
- 78 KZ1000C Police
- 78 KZ1000D Z1R
-
Genuine Kawasaki Part ~ Used - Powder Coated Gloss Black This is a very nice battery box bracket. There is some minimal pitting on the bracket. The pitted areas will not show. Kawasaki P/N: 32113-004 Applications:- 77-78 KZ1000 A
- 77-79 KZ1000 LTD
- 1978 KZ1000 Police
-
Genuine Kawasaki Part ~ Used (reconditioned.) Pad Length is 28mm. This is a reconditioned original part, it has been freshly powder coated. Kawasaki P/N: 32030-066 Previous P/N: 32030-055 Applications:- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 77-80 KZ1000G Z1 Classic
- 1980 Kawasaki 1000 POLICE C1, C1A
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 POLICE C2
-
Nice reconditioned OEM Genuine Kawasaki Part. Actual part may differ from photo due to reconditioning process. Kawasaki P/N: 46098-010 Applications:- 73-75 Z1 900
- KH 250
- S1
- KH 400
- H1
- KH 500
- H2
- KZ 650
- KZ 750B
- KZ900
- 77-78 KZ1000
- 77-80 KZ1000 LTD
- KZ1000 Police (early)
- 1978 Z1R
-
Out of stock
Kawasaki Genuine Part ~ Nicely reconditioned and freshly powder coated by ACE Powder Coating Kawasaki P/N: 32097-044 Applications: 77-78 KZ1000 77-80 KZ1000 LTD 77-81 KZ1000 Police -
Genuine Kawasaki ~ Used ~ Powder Coated ~ Semi-Gloss Kawasaki P/N's: 44037-098 Steering Stem (2) 92003-064 Bolt (2) 461F1200 Washer Applications:- 1976-1977 KZ900 A4-5
- 1976 KZ900 B1 LTD
- 1977-1978 KZ1000 A1-2
- 1977-1978 B1-2 LTD
-
Nice Replated Bracket Kawasaki P/N: 35026-006 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 78-81 KZ1000 Police
-
Kawasaki P/N: 11009-1210 SS P/N: 11060-1070 Applications:- 1981-1982 KZ1000J J1 J2
- 1981-1982 KZ1000 LTD
- 1981-1982 KZ1000 CSR
- 1982 and up KZ1000 Police
- 1982-1983 KZ1000R
- 1981-1984 GPZ1100
- KZ1100 D1 D2
- May fit others
-
Out of stock
Kawasaki Genuine Part ~ Used ~ Powder Coat finish by ACE Powder Coating Kawasaki P/N: 43007-049 Applications:- 1980 KZ1000
- 78 & 80 Z1R
- 77-80 KZ1000A
- 79-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 C3
- KZ650 D1, D2
-
New Reproduction Part Replaces Kawasaki P/N: 16046-002 Our P/N: 10125 Sold each Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-78 KZ1000A
- 77-80 KZ1000B LTD
-
Lock washers and bolts are quality made in the U.S.A. Lock washers replace Kawasaki P/N: 92088-023 (qty 2) Bolts replace Kawasaki P/N: 92001-158 (qty 4) Our P/N: 92088-023KIT Applications:- KH400 A3-A5
- KZ400 B1-B2
- 76-77 KZ900 A
- 76-77 KZ900 Police
- 1976 KH500
- 1976 KZ650 B1-B3
- 1976 KZ650 C1-C3
- 1976 KZ650 D1-D2 SR
- 77-80 KZ1000 A
- 77-80 KZ1000 LTD
- 78&80 Z1R
- early KZ1000 Police
- 76-79 KZ750 B