- 1979 KZ400-H1
- 1980-1981 KZ440A
- 1980-1981 KZ440D LTD Belt
- 1982 KZ440-G1
- 1980-1983 KZ550A
- 1980-1982 KZ750E
- 1980 KZ750-G1 LTD
- 1979-1980 KZ1000A
- 1979-1980 KZ1000E Shaft
-
Kawasaki P/N: 23048-1006 Supersedes P/N: 23048-1002 Applications: -
Out of stock
Kawasaki Genuine Part ~ Used Very nice cover. Very minimal chain marks. Has some marking on the inside as shown as well. Includes one each Used Kawasaki P/N:- 14024-007 Transmission Cover
- 92049-004 Seal
- 92050-048 Seal
- 92050-024 Seal (SS P/N: 92049-1506)
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-78 KZ1000 A
- 77-78 KZ1000 LTD
- 78 Z1R
- Early KZ1000 Police
- Early KZ900 Police
- Early Z1 Police
-
Out of stock
Kawasaki P/N: 33034-025 Applications:- 1977 KZ1000A
-
Out of stock
New Old Stock. Sold as a set of 2 Applications:- 82-83 KZ 1000R
- 81-82 KZ 1000J
- 81-82 KZ 1000 LTD
- 81-82 KZ 1000 CSR
- KZ 1000P 1-P3
-
Contains 16115-013 Oil Plug and 92055-049 O-Ring Applications:- 73-75 Z1 900
- KZ 1000
- KZ 1300
- KZ 900
- and more
-
Out of stock
This is a very nice polished, early edition clutch cover. Has some minor scratches from shelf life. This would be a perfect addition for your favorite bike. It is lighter in weight than the late model cover. We believe this is for 73-76 because of the thinner ribs on the inside. Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 76 Kz900B LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 14032-082 cover (supersedes to 14032-121)
- 52015-004 oil gauge window
- 14046-024 gasket
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 43064-001 Applications:- 1977 KZ1000
- 73-75 Z1 900
- 76 KZ900 LTD
- 76-77 KZ900A
- 76-79 KZ750B
- 72-75 H2 750
- 72-75 H1 500
- 73 S2A 350
- KZ650B
- KH400
- KH500
- S3 400
- KZ400
-
Set of 4 Kawasaki P/N: 18069-1015 Applications:- 1981-1982 KZ1000 LTD, KZ1000J, KZ1000 CSR, KZ1000 Police using J motor
- 1981-1983 KZ1100A
- 1984-1985 ZN1100 B1 B2
- 1973-1975 Z1 900 and 1977-1980 KZ1000 Custom Application
-
Out of stock
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41078-1012 Applications:- KZ650-E1
- KZ650-F1
- KZ750-G1
- KZ1000-A4 (1980)
- KZ1000-B4 (LTD) (1980)
- KZ1000-D3/Z1R (1980)
- KZ1000-G1 (Z1 Classic)
-
Genuine Kawasaki ~ Used Cases are in good shape except for a crack and missing pin, as shown. We took these off a 1977 and they have a good VIN. Location: Farm -
Replaces Kawasaki P/N: 92004-065 Superceded Kawasaki P/N: 92004-1069 Our P/N: 92004-065 Quality replacement part Made in U.S.A. Applications:- 77-83 KZ 1000 (all)
- 81-83 KZ 1100 Shaft
- 81-82 KZ 1100 GPZ
- 82-83 KZ 1100 Spectre
- 83 KZ 1100 LTD Shaft
- 80-81 KZ 250
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 42032-071 Sold as shown Applications:- 77 - 80 KZ1000A
- 77 - 80 KZ1000 LTD
- 78 + 80 Z1R
- Early KZ1000 Police
-
Good quick fix for meters that have been dented, or flaking Our P/N: 58-12410 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- May fit others
-
Includes P/N 25012-023 Speedometer Cover 25012-024 Tachometer Cover Our P/N: 58-85100 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- KZ1000 77-78
- Z1 900 73-75
- May fit others
-
Genuine Kawasaki Part Length 31mm Collars have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 92027-160 -
Out of stock
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
K&N delivers a race-spec oil filter which is built with a high-efficiency media specifically designed to withstand the high concentrates of synthetic racing oils. Replaces Kawasaki P/N: 16099-003 K&N P/N: KN-401 -
Out of stock
Genuine Kawasaki Part ~ Freshly powder coated Kawasaki P/N: 46094-019 Applications:- 77-80 KZ 1000 A
- 77-80 KZ 1000 LTD
- 78-81 KZ 1000 C
- 78-80 KZ 1000 D Z1R
- 76-79 KZ 750 B
- 77-79 KZ 650
- Will fit others
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Out of stock
Notice the taper on the rib which is correct for 1977-1978 KZ1000 Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-100-80 Cover 14045-014 Gasket (New) Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000B LTD
- 1978 KZ1000C Police
- 1978 KZ1000D Z1R
- Will fit others
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Carburetor Holder Set - Left & Right Quality Made Reproduction Part Replaces Kawasaki P/N's: (2) 16065-028 Right (2) 16065-029 Left (4) 92068-006 Rubber Plug Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900 All
- 1977-1980 KZ1000 All
-
Quality Reproduction Grab Rail with Hardware Kawasaki P/N: 35032-022 (10276) Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
-
Out of stock
Set of 2 Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23019-022 Applications below -
Made in Japan 219Hx122 Replaces Kawasaki P/N: 21070-003 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1977-1978 KZ1000 Police
- 1978 Z1R
-
Out of stock
Kawasaki P/N: 92022-248 -
Kawasaki P/N: 23019-023 Applications:- 73-75 H1 500 D, E, F
- 1982 KZ250 L1 (CSR BELT)
- 1972 H2 750 Mach IV
- 1983 KZ250 W1 (LTD BELT)
- 74-75 H2 750 B, C Mach IV
- 81-82 KZ305 A1-A2 (CSR)
- 1976 KH250 A5
- 1982 KZ305 B1 (CSR BELT)
- 76-78 KH400 A3-A5
- 87-88 KZ305 B2-B3
- 1976 KH500 A8
- 81-83 KZ440 A2-A3,B2,D2-D5,G1
- 77-80 KZ1000 A1-A4, A2A, A3A
- 80-83 KZ550 C1 -C4,D1,H1-H2
- 77-80 KZ1000 B1-B4 LTD
- 77-79 KZ650 B1-B3, B2A
- 1978 KZ1000 C1, C1A Police
- 77-79 KZ650 C1-C3 Custom
- 79-80 KZ1000 E1-E2 Shaft
- 78-79 KZ650 D1-D2, D1A SR
- 1980 KZ1000 G1 Classic
- 1980 KZ650 E1 LTD
- 81-83 KZ1000 J1-J3
- 1980 KZ650 F1
- 81-82 KZ1000 K1-K2 (LTD)
- 81-83 KZ650 H1-H3 (CSR)
- 81-82 KZ1000 M1-M2 (CSR)
- 1984 KZ700 A1
- 82-83 KZ1000 R1-R2 Eddie Lawson Replica
- 76-82 KZ750 B1-B4,E1-E3,G1,H1-H3,L3,M1,N1-N2,R1
- 81-82 KZ1100 A1-A2 (SHAFT)
- 76-77 KZ900 A4-A5,B1
- 81-82 KZ1100 B1-B2 (GPz)
- 73-75 S1 A, B, C Mach I
- 1982 KZ1100 D1 (SPECTRE)
- 72-73 S2 A Mach II
- 79-82 KZ1300 A1-A4
- 74-75 S3 A Mach II
- 1980 KZ1300 B2
- 73-75 Z1 900 A, B
- 78-79 KZ200 A1-A2
- 83-84 ZX1100 A
- 80-81 KZ250 D1-D2
- 83-85 ZX650 A,E
-
Out of stock
Quality Parts Made in the U.S.A. Takes wrench size 12mm OEM size takes 13mm Replaces Kawasaki P/N's: 92019-013 Nut (4) 92102-010 Cap (4) Our P/N: 35-013C Applications:- Z1 900
- KZ650
- KZ900A
- KZ900 LTD
- 1976-1979 KZ750B
- 1977-1980 KZ1000LTD
- Z1R
- 1977-1980 KZ1000A
-
Quality Made Replacement Mirror with 10" Stem. Replaces Kawasaki P/N: 56002-021 - Superseded P/N: 56001-1030 Applications:- Z1 900
- KZ900
- KZ1000A
- May fit others
-
Kawasaki P/N's: 99996-1031 Lock Washer (1) - Superseded P/N: 92022-1351 32085-1101 Stopper (1) Our P/N: 99996-1031 Applications:- 1981-1982 KZ1000 J1, J2
- 1981-1982 KZ1000 K1, K2
- 1981-1982 KZ1000 M1, M2 (CSR)
- 1982-1986 KZ1000 P1-P5 (Police 1000)
- 1982 KZ1000 R1 (Eddie Lawson Replica)
- 1981-1982 KZ1000 B1, B2 (GPz)
-
Kawasaki P/N: 12037-022 Applications:-
1973-1975 Z1 900
-
1976-1977 Kz900A
-
1976 Kz900B Ltd
-
1977-1980 Kz1000A
-
1977-1980 Kz1000B Ltd
-
1978-1981 Kz1000C Police
-
1978 & 1980 Kz1000D Z1R
-
1979-1980 Kz1000E Shaft
-
1980 Kz1000-G1 Classic
-
1981-1983 Kz1000J
-
1981-1982 Kz1000K Ltd
-
1981-1982 Kz1000M CSR
-
1982-1983 Kz1000R Eddie Lawson Replica
-
1981-1983 Kz1100A Shaft
-
1981-1982 Kz1100B GPz
-
1982-1983 Kz1100D Spectre
-
-
Genuine Kawasaki ~ Reconditioned Kawasaki P/N: 33044-001 Applications:- 1974-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900
- 1976 KZ900 LTD
- 1977-1980 KZ1000 (All)
- May fit others
-
Out of stock
Parts Unlimited P/N: K22-3727 Replaces Kawasaki P/N: 42041-169 - Superseded P/N: 42041-1010 Applications:- 1977-1980 KZ1000 LTD
- 1980 KZ1000G Z1 Classic
- 1977-1978 KZ1000A
- 1977-1978 KZ750L3
- 1977-1978 KZ750E
-
Dyna suppression core spark plug wires use the highest grade of graphite suppression core to to reduce electrical noise and increase engine performance. Two wires each 48" Long (cut to length; can be used on up to four cylinders) Our P/N: DW800 Applications:- Suzuki GS1100
- Kawasaki Z1 900
- Kawasaki KZ1000
- Many other 4 cylinder Japanese bikes
-
Quality made reproduction parts. Replaces Kawasaki P/N's: (5) 220B0308A Screw (5) 461F0300 Spring Washer Our P/N: 220B0308 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900
- 1977-1980 KZ1000 A, B
- Will fit other KZ1000
-
Kawasaki P/N: 43004-1036 -
Kawasaki P/N: 13169-1152 -
Replaces Kawasaki P/N: 92059-147 Our P/N: 10097 Quality Made Reproduction Bike takes 2. Hose is approximately 39 1/2" long. Applications:- Z1 900
- KZ1000
- KZ650
- Many more
-
Out of stock
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92065-081 Superseded by P/N: 43049-1070 Applications:- Z1 900
- Z1R
- F11
- 76-79 KZ750B
- KH250
- 77-78 KZ1000
- S1
- 77-80 KZ1000 LTD
- KH400
- KZ900
- Z1 Classic KZ1000G
-
Freshly powder coated Works on seats without the Seat Stay Kawasaki P/N: 53009-032 Applications:- 1976-1977 KZ900
- 1976 KZ900 LTD
- 1978 KZ1000A
- 1977-1980 KZ1000 LTD
- 1980 KZ1000G Z1 Classic
- 1977 KZ1000A
-
New Aftermarket Replaces Kawasaki P/N: 44009-024 Our P/N: FS-013 Applications:- 74-76 KX250
- KZ900 LTD
- KX400 A-2
- 76-77 KZ900A
- 73-75 H1 500
- 73-75 Z1
- 972 H1 500 (H1C)
- 77-80 KZ1000A
- 1976 KH500 A-8
- 77-80 KZ1000B LTD
- 72-75 H2 750
- 78&80 Z1R
- 76-79 KZ750B
- KZ1000G Z1 Classic
- Will fit others. Please check first*
-
Vapor blasted in-house for that clean, genuine look. New bearings and oil seal. Kawasaki P/N: 41034-041 Applications:- 1976-1977 KZ900A
- 1977-1978 KZ1000A
- 1976-1979 KZ750B
- 1977-1979 KZ650B
-
Out of stock
This is a re-plated part. Genuine Kawasaki ~ Used Kawasaki P/N: 41069-033 Applications:- 1976-1977 KZ900
- 1977-1981 KZ1000
-
Re-plated Front Brake Caliper Shaft Bolts Includes Spacer Kawasaki P/N: 43045-006 Bolts (2) 43040-004 Spacer (1) Applications:- 76-77 KZ900 All
- 77-80 KZ1000 All
- 76-79 KZ750B Twin
- 77-79 KZ650 All
- Will fit others
-
Kawasaki Genuine Part ~ Reconditioned Kawasaki P/N: 41069-032 Applications:- 76-77 KZ900
- 77-81 KZ1000
- Will fit others