KZ 1000 A - Page 26 of 26 - Johnny's Vintage Motorcycle Company

44006-1001 44005-1001 Kawasaki KZ1000 Brush Finish Lower Legs Fork Tubes

$300.00

Brush finish. Set of 2. Some have lower bracket as shown for fender brace, and some do not. Kawasaki uses the same part number for both versions. Consists of:

1) 44005-1001 Left Hand Outer Tube
1) 44006-1001 Right Hand Outer Tube
2) 220B0408A Screws
2) 44045-002 Drain gaskets
2) 44049-024 Fork seals
2) 44010-032 Dust shields
2) 44043-044 Washers
2) 44044-012 Circlip

Application:

78 KZ1000A
77-80 KZ1000 LTD
80 KZ1000G, Z1 Classic
78-79 KZ750B
78-79 KZ650B

Details

Out of stock

13031-1006 Kawasaki Z1R Crankshaft 78 KZ1000

$300.00

Kawasaki P/N: 13031-1006 This one-year-only crankshaft is in nice shape. Rods and bearings feel good. No flywheel key. 10mm rotor bolt. Applications:

78 KZ1000A
78 KZ1000 LTD
78 Z1R

location: farm

Details

14001-107-2J Kawasaki KZ1000 Crankcase Bottom Only

$300.00

Used KZ1000 crankcase with no damage. Bottom only with shift drum ad shift fork. Kawasaki P/N: 14001-107-2J Application:

77-78 KZ1000
May fit others

location: farm

Add to cart Details

13031-056 77 Kawasaki KZ1000 Crankshaft

$325.00

Nice used crankshaft. Kawasaki P/N: 13031-056 Applications:

77 KZ1000A
KZ1000 LTD

location: farm

Add to cart Details

16001-1154 RH Carburetor Kawasaki KZ1000 Mikuni Carb

$450.00

Right Carburetor Outer VM28SS Mikuni New Kawasaki Genuine Parts ~ New Old Stock Kawasaki P/N: 16001-1154 Application

 1979-80 KZ1000A

Add to cart Details

Out of stock

42048-042 Kawasaki KZ1000A Rear Wheel 18″ 77-78

$500.00

This is a very nice restored rear wheel. OEM Kawasaki P/N: 42048-042 Date code: 7D Applications:

77-78 KZ1000A

Details

Out of stock

11011-065 Kawasaki KZ1000A Air Box Complete KZ1000 LTD

$525.00

OEM Kawasaki P/N: 11011-065 Includes P/N:

11013-063 Element, air cleaner
11012075 Cap, air cleaner
11011065 Body, air cleaner
11016009 Silencer
92059-124 Tube drain
11015-050 Inlet pipe LH outside
11015-051 LH inside and RH inside (2) pipe
11015-053 RH outside pipe
More

Applications:

77-78 KZ1000A
77-78 KZ1000 LTD

location: farm

Details

Out of stock

41074-047 Rebuilt Kawasaki KZ900 Front Wheel KZ1000A

$550.00

Wheel consists of:

Brand new DID Rim
Buchanan Stainless Spokes and Nipples
Polished Hub
New Bearing and Seal

Applications:

77-78 KZ1000A
76-77 KZ900A
76 KH500
77-79 KZ750B
70's KZ650
May fit others

Details

41074-047 Rebuilt Kawasaki KZ900 Front Wheel KZ1000A

$550.00

Wheel consists of:

Brand new DID Rim
Buchanan Stainless Spokes and Nipples
Hub
New Bearing and Seal

Applications:

77-78 KZ1000A
76-77 KZ900A
76 KH500
77-79 KZ750B
70's KZ650
May fit others

Add to cart Details

K1015 Kawasaki Z1 900 KZ1000 1015 Piston Kit

$852.84

P/N: K1015 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:

4 Pistons
4 Ring sets
4 Piston pins
8 Circlips
Base gasket
Head gasket

Applications:

Z1 900
KZ1000

Add to cart Details

1982 Kawasaki KZ1000J Motor 2164 27,000 Miles

$1,000.00

Motor# KZT000JE032164 Parting out an 82 KZ1000J, offering this motor separately. No title. 27,000 miles. Charging system works, Good rotor, selling without the carbs. Motor, ignition, starter included. The bike has been sitting for years, but inside the motor was well preserved, as shown. No broken fins. No damage. Clutch not frozen up. Ignition was replaced, new clutch gasket, transmission is good. No smoke, no oil leaks. Sold as-is. Will ship dry. Watch video below to see it run. Applications:

KZ1000J
KZ1000 CSR
KZ1000 LTD
KZ1000 Police

128 lbs, 24" x 22" x 22" (without crate) Possible low-cost shipping upon request. location: 188

Add to cart Details

Out of stock

127-61001 Kawasaki Z1 900 Kerker 4-Into-1 Exhaust BLACK

$1,178.95

Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:

73-75 Z1 900
76-77 KZ900A
76 KZ900B LTD
77-80 KZ1000A
77-80 KZ1000B LTD

Details

K1075 Kawasaki Z1 900 KZ1000 1075 Piston Kit

$1,267.71

P/N: K1075 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:

4 Cylinder sleeves
4 Pistons
4 Ring sets
4 Piston pins
8 Circlips
Base gasket
Head gasket

Applications:

Z1 900
KZ1000

Add to cart Details

35-1 Kawasaki KZ1000 Wiseco Cylinder Kit

$1,400.00

This kit is for 77-80 KZ1000A, but will also work on Z1R, KZ1000A LTD or Z1 900. Cylinder head has been fitted with brand new cylinder sleeves from Wiseco. Includes 1015 Kit from Wiseco, piston 1-4, all marked, pistons, rings, pins, and clips, as well as gaskets. This is a bolt-on kit, ready to go. No broken fins on the cylinder. Applications:

77-80 KZ1000A
Z1R KZ1000A LTD
Z1 900.

Add to cart Details

Out of stock

Kawasaki KZ1000 Wiseco® 1075 Kit with Cylinder

$1,500.00

This is a ready-to-go bolt-on kit, complete with Wiseco 1075 kit. Freshly-bored cylinder. No broken fins. This is the same setup we use on our restorations. Applications:

76-77 KZ900
77-80 KZ1000
73-75 Z1 900

Details