- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Out of stock
These NOS stands came from an older inventory. There was some small damage from poor shelf life, so they have been freshly powder coated. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Applications: -
Out of stock
Mini coil set 3 OHM Dual, set of 2. This is the part we use on our Z1 900 and KZ1000 73-78 restorations. Will work on others. We also have wires and lower units in stock. -
Out of stock
NOS Kawasaki front spoke set, complete with nipples. Includes (20) 41028-084 (outer) and (20) 41027-085 (inner) Applications:- 76-77 KZ900A
- 77-78 KZ1000A
- 76-79 KZ750B
- 76 KH500A
- Will fit others
-
Out of stock
Nicely polished Front Sprocket Cover with Clutch Inspection Cover. Genuine Kawasaki, Used Kawasaki P/N: 14026-1017 Applications:- 1979-1980 KZ1000A MKII
- 1979-1980 KZ1000B LTD
- 1979-1981 KZ1000C Police
- 1980 KZ1000D Z1R
-
We recommend Pingel Fuel Valves for every restoration we do. Kit made from quality reproduction parts. Replaces Kawasaki P/N: 51023-1006 Superseded P/N: 51023-1018 Our P/Ns: A1703C Adapter Plate, 3311-D-AH Fuel Valve Applications:- KZ1000 A2, A2A
- KZ1000 C1A, C2, C3
-
Out of stock
Genuine Kawasaki - Used Polished, very nice kit. Kawasaki P/N's: 11022-005-2H Cylinder Head Cover Replaces 92003-092 Cam Cover Bolt Set Replaces 11023-006 Gasket Applications:- 73-75 Z1 900
- 76-77 KZ900
- Will work on 77-78 KZ1000
-
Out of stock
Notice the taper on the rib which is correct for 1977-1978 KZ1000 Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-100-80 Cover 14045-014 Gasket (New) Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000B LTD
- 1978 KZ1000C Police
- 1978 KZ1000D Z1R
- Will fit others
-
Out of stock
Quality powder coated center stand. Replaces Kawasaki P/N: 34011-1004KIT Kit consists of:- (1) 34011-1004 Main stand
- (1) 34023-012 Spring
- (2) 34019-014 Bolts
- (2) 92016-044 Nuts
- 73-75 Z1 900 (With 4-into-1 header)
- 77-78 KZ1000A (With 4-into-1 header)
- 78 Z1R
-
Nice used camshaft set, includes sprockets and bolts, as shown. Genuine Kawasaki P/N's: 12044-014 Intake- Superseded from 12044-004
- Superseded from 12044-005
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)
-
Serial # KZT00AE005205 Cases are in nice shape. No damage or broken bolts. Some corrosion. Will clean up. Applications:- Correct for 1977
- Will work with others.
-
Brake hub assembly, restored with new bearings, seal and polish job.. Chrome has some very minor pitting, as shown. Applications:- 77-78 KZ1000A
-
Out of stock
Nice chrome cover came from an older inventory we purchased. We estimate the chrome is about 20 years old. Very nice shape. OEM Kawasaki P/N: 14026-039-80 Comes with P/N: 14026-012 Chain oiler cover, as shown. Applications:- 77-78 KZ1000A
- 78 Z1R
- 77-78 KZ1000B (LTD)
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
New Old Stock Genuine Kawasaki P/N: 25005-1067 Applications:- 1980 KZ1000G (Z1 Classic)
- KZ1000A (MKII)
- KZ1000B (LTD)
-
Out of stock
Fork outer tubes have been brush polished. Set includes:- 44005-063 LH Outer Tube
- 44006-061 RH Outer Tube
- 44009-024 Fork Seals
- 44010-032 Dust Shields
- 220B0408A Screws
- 44045-002 Seals
- 76-77 KZ900A
- 76 KH500
- 77 KZ1000A
- 76 KZ900 LTD
- May fit others
-
Genuine Kawasaki, reconditioned Kawasaki P/N: 43041-1013 Applications:- 1980 KZ1000D Z1R
- 1979-1980 KZ1000A MKII
- 1979-1981 KZ1000C Police