- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000a
- 1976 KH500A
- 72-75 H1 500 Triple
- 72-75 H2 750 Triple Disc brake model
- May work with others
-
40 Spoke Chrome Steel Rim DID 1.85 x 19 (WM2) Kawasaki P/N: 41025-051 Applications: -
Out of stock
~ Genuine Kawasaki Part ~ Used Cleaned and Freshly Powder Coated These OEM Covers Fit Nicely Kawasaki P/N: Tach Cover: 25012-011 Speedo Cover: 25012-010 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-79 KZ650B
- 76-79 KZ750B
- 77-78 KZ1000
- May Fit Others
Item is eligible for free domestic shipping.
-
Genuine Kawasaki - Used Early edition- shaft is half hollow, as shown. Kawasaki P/N: 13066-029 Kickstart Shaft 13078-011 Kickshaft Ratchet 13068-028 Kickstarter Gear 92028-126 Kickshaft Collar Applications:- KZ750 B
- KZ900 A
- KZ900 LTD
- Z1 900
- 77 KZ1000 LTD
- 77 KZ1000 A
Item is eligible for free domestic shipping.
-
New Kawasaki Genuine Part ~ New Old Stock\ Kawasaki P/N: 43030-003 Applications:- 1972 H2 750
- 74-75 H2 750
- 76-78 KH400
- 1976 KH500
- 1977 KZ1000 A1
- 1977 KZ1000 B1 LTD
- 76-78 KZ400
- 77-79 KZ650 B
- 77-79 KZ650 C Custom
- 76-79 KZ750
- 76-77 KZ900
- 73-75 Z1 900
-
New Old Stock Genuine Kawasaki P/N: 25005-1067 Applications:- 1980 KZ1000G (Z1 Classic)
- KZ1000A (MKII)
- KZ1000B (LTD)
-
Reproduction parts. Standard size piston rings. Includes 2 pieces plus expander oil rings, sold per cylinder. Replaces OEM P/N: 13008-1001 Applications:- 77-80 KZ1000
-
~ Sold as set of 2 ~ Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78-81 KZ1000 POLICE
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
-
Out of stock
Mini coil set 3 OHM Dual, set of 2. This is the part we use on our Z1 900 and KZ1000 73-78 restorations. Will work on others. We also have wires and lower units in stock. -
Motor# KZT000JE032164 Parting out an 82 KZ1000J, offering this motor separately. No title. 27,000 miles. Charging system works, Good rotor, selling without the carbs. Motor, ignition, starter included. The bike has been sitting for years, but inside the motor was well preserved, as shown. No broken fins. No damage. Clutch not frozen up. Ignition was replaced, new clutch gasket, transmission is good. No smoke, no oil leaks. Sold as-is. Will ship dry. Watch video below to see it run. Applications:- KZ1000J
- KZ1000 CSR
- KZ1000 LTD
- KZ1000 Police
-
Quality reproduction part, replaces Kawasaki P/N: 25023-015 Superseded P/N: 25023-1006 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- 1977-1980 KZ1000A
- 1976-1979 KZ750B
- Early KZ650
-
Quality reproduction part which replaces oil pressure sending unit boot, which Kawasaki does not offer separately. P/N: 11013 Applications:- 73-75 Z1 900
- 1976-77 KZ900
- 1977-78 KZ1000
- May fit others
-
Quality reproduction part Manufacturer P/N: 11103 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-78 KZ1000
- May fit others
-
This is a rare, early production pedal boss. New Old Stock Kawasaki P/N: 13061-014 Superseded P/N: 13061-017 Applications- 1973-1975 Z1 900
- 1976-1977 KZ900 A
- 1977-1980 KZ1000 A
- 1977-1981 KZ1000 B
- 1978-1981 KZ1000 C Police
-
Genuine Kawasaki, reconditioned Kawasaki P/N: 43041-1013 Applications:- 1980 KZ1000D Z1R
- 1979-1980 KZ1000A MKII
- 1979-1981 KZ1000C Police
-
Aftermarket Replacement Lens, Set of 2 Replaces Kawasaki P/N: 23048-1006 Superseded P/N: 23048-1022 Applications:- 1979 KZ400 H1
- 1980-1981 KZ440A
- 1980-1981 KZ440D LTD Belt
- 1982 KZ440 G1
- 1980-1983 KZ550A
- 1980-1982 KZ750E
- 1980 KZ750 G1 LTD
- 1979-1980 KZ1000A
- 1979-1980 KZ1000E Shaft
-
Genuine Part ~ Used and replated Kawasaki P/N's: 1) 92001-113 BOLT 1) 92022-244 WASHER Application- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
- 1980 KZ1000-G1 CLASSIC