- 69-72 H1 500 (takes 2)
- 72-73 H2 750 (takes 2)
- Same years KZ400, KH125, KZ250, KZ440
-
Quality Made Reproduction Replaces Kawasaki P/N: 31082-005 Sold as Shown (1 piece) Applications: -
Dress up your H1 with this QUALITY American made product! Replaces Kawasaki P/N: 35032-021 Application:- 69-72 H1 500
-
These zinc plated American-made parts are exact replacements for the scarce earth plates. They meet or exceed OEM standards. These are #20 on the parts diagram shown. Replaces Kawasaki P/N: 23061-003 Applications- 1972-1973 H2
- 1972 H1B, C
- 1972 S2
-
Very high-quality reproduction front hub dust shield. Made in the U.S.A. Replaces P/N: 41042-005 Our P/N: 41042-005-aC Applications:- 69-71 H1 500
- W1, W1SS
- W2SS, W2TR, W2TT
-
Applications:- 69-71 H1 500
- W1
- W1SS
- W2SS
- W2TR
- W2TT
-
Quality aftermarket front wheel seal Replaces Kawasaki P/N: 654A254008 Applications:- 73-75 H1 500
- 76-78 KH400 A3-A5
- 1976 KH500 A8
- 77-80 KZ1000 A1-A4, A3A
- 77-80 KZ1000 B1-B4 LTD
- 78 & 80 KZ1000 D1, D3 (Z1R)
- 79-80 KZ1000 E1-E2 Shaft
- 78-79 KZ400 B1-B2
- 77-79 KZ650 B1-B3, B2A
- 77-79 KZ650 C1-C3 (Custom)
- 78-79 KZ650 D1-D2, D1A (SR)
- 1980 KZ650 E1 LTD
- 1980 KZ650 F1
- 76-79 KZ750 B1-B4
- 1980 KZ750 G1 (LTD II)
- 76-77 KZ900 A4-A5
- 1976 KZ900 B1 LTD
-
Quality reproduction part Made in U.S.A. Sold as shown, set of 3 Replaces Kawasaki P/N: 92088-007 Applications:- 69-75 H1 500
- 76 KH 500
- 76-79 KZ750B
- 77-80 KZ1000A
- 77-80 KZ1000LTD
- Early KZ1000 Pocket
- 77-80 KZ650
- Will fit others
-
Very High Quality Reproduction Part Made in the U.S.A. Replaces Kawasaki P/N: 92003-117 Applications:- 1973-1975 H1 500
- 1976 KH500
-
Side Cover Bolt Kit, Chrome finish Quality Made in U.S.A. SOLD AS SHOWN Applications:- 73-75 H1 500
- 76 KH 500
-
Chrome finish Quality Made in U.S.A. SOLD AS SHOWN Applications:- 73-75 H1 500
- 76 KH 500
-
Very High Quality Reproduction Parts Made in the U.S.A. Our P/N: 92015-055-C Axle Nut Replaces P/N: 92015-055 (Superseded by 92015-1951) Cotter Pin Replaces P/N: 550D4035 Applications:- 73-75 H1 500
- S1B, C
- KH500 A8
- KZ400
- S3, S3A
- KH400 A3-A5
- KZ550
- Many others
-
Very High Quality Reproduction Parts Made in the U.S.A. Zinc finish Our P/N: 92015-055-Z Axle Nut Replaces P/N: 92015-055 (Superseded by 92015-1951) Cotter Pin Replaces P/N: 550D4035 Applications:- 73-75 H1 500
- S1B, C
- KH500 A8
- KZ400
- S3, S3A
- KH400 A3-A5
- KZ550
-
Quality Reproduction Exact Replica Replaces Kawasaki P/N 92022-206 ~Sold in sets of 2~ Applications:- 72-73 H2 750
- 1972 S2 350
- 1972 H1 500
-
Quality reproduction tail light made in Japan Replaces Kawasaki P/N: 23026-010 Applications:- 1969-1971 H1 500 Mach
- A1 250 Twin,
- A7 350 Twin
- W1 650, W2 650
- 1971-1972 F6 125
- 1971-1972 F7 175
- 1968-1970 F3 175 Bushwacker
- 1969-1970 F4 Sidewinder
- 1971 F8 Bison
- 1970 F5 Bighorn
- 1972 F9 35
-
Quality reproduction made in Japan. Replaces Kawasaki P/N: 23026-022 Applications:- 100cc-G5
- 175cc-F3 & F7
- 250cc SideWinder-F4
- 350cc-F5
- 350cc-F9 & S2
- 500cc-H1 / H1B / H1C / H1D / H1E / H1F
- KH500-A8
- 750cc-H2
- May fit others.
-
Kawasaki Genuine Part, New Old Stock A must for the turn signal restoration. Sold as set of 2. Application: Z1 900 H2 750 78-80 KZ1000A 72-75 H1 500 S2 350 Part Number: 23058-002