- 1969-1972 H1 500
-
Kawasaki P/N: 53009-013 Applications: -
Kawasaki P/N: 53009-013-10 Applications:- 69-71 H1 500
-
New Old Stock Genuine Kawasaki P/N: 53011-001 KIT We made this kit using NOS parts in our inventory. This is the original pivot pin with cotter pin. Some models use them for the seat hinge and latch, some for the seat hinge only. Please be sure to order one kit each for every application. Kit includes:- (2) Hinge pin P/N: 53011-001
- (2) Cotter pin P/N: 550D2015
- F3 Bushwhacker
- F4 Sidewinder
- A1SS, A7, A7SS
- 69-72 H1 500
- MC1
- KD80
- *Will work on many others. Please check first.
-
New Kawasaki Genuine Parts ~ New Old Stock We made this kit using NOS parts in our inventory. This is the original pivot pin with cotter pin. Some models use them for the seat hinge and latch, some for the seat hinge only. Please be sure to order one kit each for every application. *some models require 3 kits. Be sure to order what you need! This kit is absolutely necessary to complete your restoration! Kit includes: (1) Hinge pin P/N: 53011-001 (1) Cotter pin P/N: 550D2015 Applications:- F3 Bushwhacker
- F4 Sidewinder
- A1SS, A7, A7SS
- 69-72 H1 500
- MC1
- KD80
- Will work on many others. Please check first.
-
Set of 2 Quality Reproduction, OEM Kawasaki Made in USA Kit Includes: 53011-002 (2) Seat Pin 92041-003 (2) Cotter Pin Application:- 79-80 KZ1000 E
- 79-80 KZ1000 ST Shaft
- 73-75 H2 750
- 1981 GPZ 550
- 73-75 H1 500
- 1980 KZ1000 A
- 72-73 S2 350
- 74-75 S3
- 71-72 F5 Bison
- 73-75 F9 Big Horn
- KZ550 A
- KZ650
-
New Old Stock Genuine Kawasaki P/N: 53011-002 Application:- 73-75 Z1 900
- 79-80 KZ1000 E
- 79-80 KZ1000 ST Shaft
- 73-75 H2 750
- 1981 GPZ 550
- 73-75 H1 500
- 1980 KZ1000 A
- 72-73 S2 350
- 74-75 S3
- 71-72 F5 Bison
- 73-75 F9 Big Horn
- KZ550 A
- KZ650
-
Kawasaki P/N: 54001-026 Fits: 69-71 H1 500 72 H1 C -
Out of stock
Quality reproduction part. Replaces Kawasaki P/N: 54011-030 Vendor P/N: 14072 Applications:- 69 H1 500 Mach III
- 72 H1 500 C
- 73 H1 500 D
- 74 H1 500 E
- 75 H1 500 F
- 76 KH500 A8
-
Out of stock
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 54011-030 Applications:- 69 H1 500 Mach III
- 72 H1 500 C
- 73 H1 500 D
- 74 H1 500 E
- 75 H1 500 F
- 76 KH500 A8
-
Out of stock
Genuine Kawasaki ~New Old Stock~ Kawasaki P/N: 54012-1036 Application:- 1979 KZ400 - H1
-
Out of stock
NOS Genuine Kawasaki Brake Cable Kawasaki P/N: 54022-011 Applications:- 69-71 H1
- 72 H1C
-
Genuine Kawasaki SM-2 Factory Service Manual Includes supplement for CDI Ignition The front cover shows some wear and tear and staining. There are a few small tears on the front cover, as shown. There are grease stains and other stains here and there from use. The last pages (a couple of wiring diagrams and the supplement) are stuck together. We did not try to "un-stick" them, as we did not want to cause more damage. The last page of where the supplement is appears to have been ripped. The rear cover is also stained, and has a few tears, as well. Good, complete manual. You will want to reinforce the holes on a couple of pages and stick them back into the binder. This manual has its challenges, but if you need a manual for these motorcycles, this is it. (if you need the supplement, take apart at your own risk) This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repairs. Kawasaki Manual P/N: 99995-212 Print Date: 1970 (says reprint) Models Covered:- 1969-1971 H1 500
- 1967-1971 A1 All
- 1967-1971 A7 All
-
Quality aftermarket front wheel seal Replaces Kawasaki P/N: 654A254008 Applications:- 73-75 H1 500
- 76-78 KH400 A3-A5
- 1976 KH500 A8
- 77-80 KZ1000 A1-A4, A3A
- 77-80 KZ1000 B1-B4 LTD
- 78 & 80 KZ1000 D1, D3 (Z1R)
- 79-80 KZ1000 E1-E2 Shaft
- 78-79 KZ400 B1-B2
- 77-79 KZ650 B1-B3, B2A
- 77-79 KZ650 C1-C3 (Custom)
- 78-79 KZ650 D1-D2, D1A (SR)
- 1980 KZ650 E1 LTD
- 1980 KZ650 F1
- 76-79 KZ750 B1-B4
- 1980 KZ750 G1 (LTD II)
- 76-77 KZ900 A4-A5
- 1976 KZ900 B1 LTD
-
These are the petcocks we use on all of our special project bikes. Replaces Kawasaki P/N: 51023-040 Kit includes: (1) 8210-T-AH Petcock (1) A2002C Adapter 24mm Applications:- H2 750
- H1 500
- KH 500
-
Genuine Kawasaki. These are all NOS but have been re-plated due to shelf life. New Old Stock P/N: 92001-012 Applications:- Z1 900
- KZ900
- 77-80 KZ1000
- H1 500
- H2 750
- A1
- A7
- MT1
- Many more
-
Kit Contains: 2) 92001-038 Bolt 12mm head, 2) 312B0800 13mm nut Applications:- 73-74 Z1 900
- 69-72 H1 500
- A1 & A155 250 Twin
- A7 & A755 350 Twin
- May fit others