- 67-68 A1 Samurai 250cc
-
New Kawasaki Genuine Parts ~ New Old Stock Correct for A1 Engines # A1E02533 and Below Kawasaki P/N: 21008-007 Replaces P/N: A1010-9206 Application -
Genuine Kawasaki Part Length 31mm Collars have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 92027-160 -
K&N delivers a race-spec oil filter which is built with a high-efficiency media specifically designed to withstand the high concentrates of synthetic racing oils. Replaces Kawasaki P/N: 16099-003 K&N P/N: KN-401 -
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 44045-049 This part is for the headlight mounting brackets to absorb vibration in order to prevent stress cracking and premature headlight failure. They fit below the brackets, over the fork upper tube. Some of the models listed use 4, some use 2. These are considered must have parts for proper headlight mounting. Sold as Shown. Applications:- 1983 EX305 B1 (Gpz 305)
- 76-79 KE125 A3-A6
- 1974 KS125
- 1975 KS125 A
- 78-79 KZ200 A1-A2, A1A
-
Out of stock
Kawasaki P/N: 16087-002 Applications:- A1 250
- A1SS 250
- A7 350
- A7SS 350
- F3 175 Bushwacker
- F4 250 Sidewinder
-
Out of stock
Set of 2 Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23019-022 Applications below -
Out of stock
Sold as a set of 8 Kawasaki P/N: 92049-1153 Applications:- 1980-1983 KZ550 A1-A4
- 1980-1983 C1 (LTD)
- 1981 KZ550 D1 (GPz)
- 1983 KZ550 F1 (Spectre)
- 1984 KZ550 F2 (LTD Shaft)
- 1982-1983 H1-H2 (GPz)
- 1983 KZ550 M1 (LTD Shaft)
- 1983-1990 ZR550 B1-B4 (Zephyr)
- 1984-1986 ZX550 A1-A3 (GPz)
-
Kawasaki P/N: 23019-023 Applications:- 73-75 H1 500 D, E, F
- 1982 KZ250 L1 (CSR BELT)
- 1972 H2 750 Mach IV
- 1983 KZ250 W1 (LTD BELT)
- 74-75 H2 750 B, C Mach IV
- 81-82 KZ305 A1-A2 (CSR)
- 1976 KH250 A5
- 1982 KZ305 B1 (CSR BELT)
- 76-78 KH400 A3-A5
- 87-88 KZ305 B2-B3
- 1976 KH500 A8
- 81-83 KZ440 A2-A3,B2,D2-D5,G1
- 77-80 KZ1000 A1-A4, A2A, A3A
- 80-83 KZ550 C1 -C4,D1,H1-H2
- 77-80 KZ1000 B1-B4 LTD
- 77-79 KZ650 B1-B3, B2A
- 1978 KZ1000 C1, C1A Police
- 77-79 KZ650 C1-C3 Custom
- 79-80 KZ1000 E1-E2 Shaft
- 78-79 KZ650 D1-D2, D1A SR
- 1980 KZ1000 G1 Classic
- 1980 KZ650 E1 LTD
- 81-83 KZ1000 J1-J3
- 1980 KZ650 F1
- 81-82 KZ1000 K1-K2 (LTD)
- 81-83 KZ650 H1-H3 (CSR)
- 81-82 KZ1000 M1-M2 (CSR)
- 1984 KZ700 A1
- 82-83 KZ1000 R1-R2 Eddie Lawson Replica
- 76-82 KZ750 B1-B4,E1-E3,G1,H1-H3,L3,M1,N1-N2,R1
- 81-82 KZ1100 A1-A2 (SHAFT)
- 76-77 KZ900 A4-A5,B1
- 81-82 KZ1100 B1-B2 (GPz)
- 73-75 S1 A, B, C Mach I
- 1982 KZ1100 D1 (SPECTRE)
- 72-73 S2 A Mach II
- 79-82 KZ1300 A1-A4
- 74-75 S3 A Mach II
- 1980 KZ1300 B2
- 73-75 Z1 900 A, B
- 78-79 KZ200 A1-A2
- 83-84 ZX1100 A
- 80-81 KZ250 D1-D2
- 83-85 ZX650 A,E
-
Side Cover Emblem Nut Lock, 3mm Exact replica of original Kawasaki P/N: (2) 92018-005 Our P/N: (10036) Applications: See below -
Kawasaki Genuine Part These parts have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 41068-049 Applications:- 1976 KH500 A8
- 77-79 KZ650 B1-B3
- 77-79 KZ650 C1-C3 Custom
- 78-79 KZ650 D1-D2 SR
- 1980 KZ650 E1 LTD
- 1980 KZ650 F1
- 76-79 KZ750 B1-B4
- 1980 KZ750 G LTD
- 76-77 KZ900 A4-A5
- 1976 KZ900 B1 LTD
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78 & 80 KZ1000 D1, D3 ZIR
- 1980 KZ1000 G1 Classic
-
Kawasaki P/N: 16022-005 Applications:- 1972-1975 H2
- 1969-1975 H1
- W1
- W2
- S3
- A1
- A7
- KH500
- KH400
- KX450 early
- F5
- F7
- F9
- F12MX
- KXT Tecate
- KX60
-
Kawasaki P/N: 92043-1037 SS P/N: 92042-033 Applications:- A1
- A7
- C2
- Z1 900
- KZ900
- Z1R
- H2 750
- H1 500
- KX250
- Many more
-
Out of stock
Kawasaki P/N: 42029-013 SS P/N: 42029-037 Applications:- A1
- A7
- F4
- F5
- F8
- F9
- F12MX
- F21M
- F81M
- S1
- S2
- S3
- KH250
- KH400
- KX250
- KX250-A3
- KX450
- 1969-1972 H1
-
Out of stock
New Old Stock P/N: 43005-037 Applications:- 77-80 KZ1000
- A1-A2, A2A
- C1, C2, C1A
-
Kawasaki P/N: 42029-036 Applications:- KZ400 A1 A2
- KZ400 D1-D4
- KZ400 S-S3
-
Kawasaki P/N: 751P0800 Applications:
- Will fit many early oil pumps
-
Out of stock
Kawasaki P/N: 21070-005 SS P/N: 92057-1009 Applications:- 1981 KZ200 A1
- 1974 KZ400
- 1977-1978 KZ400 A1 A2
- 1978-1979 KZ400 B1 B2
- 1975-1977 KZ400 D D3 D4
- May fit others
-
New Kawasaki Genuine Part ~ New Old Stock~ Kawasaki P/N: 92015-019 Nut Kawasaki P/N: 92024-015 Lock Washer Applications:- 79-80 KDX400 A1-A2
- 75-76 KX400
- 80-81 KX420
- 1973 F12MX
- 1982 KDX450 H1R
- 69-75 H1 500
- 1976 KH500 A8
- 1981 KDX420 B1
-
Genuine Kawasaki ~ Used ~ Powder Coated ~ Semi-Gloss Kawasaki P/N's: 44037-098 Steering Stem (2) 92003-064 Bolt (2) 461F1200 Washer Applications:- 1976-1977 KZ900 A4-5
- 1976 KZ900 B1 LTD
- 1977-1978 KZ1000 A1-2
- 1977-1978 B1-2 LTD
-
3rd Gear Drive, 23 Tooth New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13132-009 Applications:- A1 & A1SS 250
- A7 & A7SS 350
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23028-019 Applications:- 74-75 F7-C, F7-D
- 74-75 F9-B, F9-C
- 74-75 G3SSD, G3SSE
- 74-75 G4TR-D, G4TR-E
- 76-79 KE125-A3 to A6
- 76-78 KE175-B1 to B3 (KE175)
- 77-79 KE250-B1 to B3
- 76-77 KH100-B7, B8
- 78-79 KL250-A1, A2 (KLR250)
- 76-81 KM100-A1 to A7
- 74-75 KS125, KS125-A
- 1976 KV100-A7
- 74-78 KZ400, KZ400-A1 to A2
- 78-79 KZ400-B1 to B2
- 1978 KZ400-C1
- 75-77 KZ400-D, D3, D4
- 75-77 KZ400-S, S2, S3 (Special)
- 80-81 KZ440-B1, B2
- 74-75 MC1-A, B
- May fit others
-
Out of stock
Quality reproduction boot and clip, made in Japan. Replaces the A7, A1 steering damper as well as early H1 500. Our P/N: H1BootKit Applications:- A1
- A7
- early H1 500
-
Kawasaki Genuine Part ~ New Old Stock
Kawasaki P/N: 92081-069
Applications:1973 F11M 80-83 KZ550 A1-A4 1970 F5 Big Horn 80-83 KZ550 C1-C4 LTD 1971 F81M 1981 KZ550 D1 GPZ 1972 F8-A 82-83 KZ550 H1-H2 GPZ 72-75 F9, A, B, C 77-79 KZ650 B1-B3, B2A 77-80 KZ1000 A1-A4, A2A, A3A 77-79 KZ650 C1-C3 Custom 77-80 KZ1000 B1-B4 LTD 78-80 KZ650 D1-D2, D1A SR 78-81 KZ1000 C1-C4, C1A Police 1980 KZ650 E1 LTD 78&80 KZ1000 D1,D3 ZIR 1980 KZ650 F1 1980 KZ1000 G1 Classic 81-83 KZ650 H1-H3 81-83 KZ1000 J1-J3 1984 KZ700 A1 81-82 KZ1000 K1-K2 LTD 80-82 KZ750 E1-E3 81-82 KZ1000 M1-M2 CSR 1980 KZ750 G1 LTDII 82-03, 05 KZ1000 P1-P22, P24 Police 80-83 KZ750 H1-H4 LTD 82-83 KZ1000 R1-R2 Eddlie Lawson Replica 1983 KZ750 L3 81-83 KZ1100 A1-A3 Shaft 1982 KZ750 M1 CSR Twin 81-82 KZ1100 B1-B2 GPZ 1982 KZ750 R1 GPZ 82-83 KZ1100 D1-D2 Spectre 76-77 KZ900 A4-A5 1983 KZ1100 L1 LTD Shaft 1976 KZ900 B1 LTD 1981 KZ305 A1 CSR 73-75 Z1 900 1974 KZ400 84-85 ZN1100 B1-B2 LTD Shaft 77-78 KZ400 A1-A2 83-84 ZX1100 A1-A2 GPZ 75-77 KZ400 D, D3-D4 -
Out of stock
Highest quality Japanese made reproduction clamp. Replaces Kawasaki P/N: 92081-027 Applications:- 69-75 H1 500
- 1976 KH500
- 72-75 H2 750
- A1, A1SS
- A7, A7SS
-
Set of 2 Rear Passenger Foot Peg Rubbers Highest Quality Reproduction! Replaces Kawasaki P/N: 92076-009 Applications:- A1, A1SS
- A7, A7SS
- H1 500, H1C
- W1, W1SS
- W2SS, W2TT
-
Out of stock
Quality Japanese Made Reproduction Part Replaces Kawasaki P/N: 92037-128 and 92037-035 Sold as Shown Applications:- 69-75 H1 500
- 1976 KH500
- F6, F7, F7C, F7D
- KE175 A1-A4
- KE175 B1-B3
-
Part Number: 92007-011 Kit includes: 2) 92007-011 bolts and 2) 461F1000 Spring Washers. Application:- 69-72 H1
- Early KZ400
- A1, A7 All
- KD125, KD175
- W1, W1SS, W2SS, W2TT
- MC1
- F3, F4, F5, F7, F8
- G3, G4, G5
-
Quality reproduction tail light made in Japan Replaces Kawasaki P/N: 23026-010 Applications:- 1969-1971 H1 500 Mach
- A1 250 Twin,
- A7 350 Twin
- W1 650, W2 650
- 1971-1972 F6 125
- 1971-1972 F7 175
- 1968-1970 F3 175 Bushwacker
- 1969-1970 F4 Sidewinder
- 1971 F8 Bison
- 1970 F5 Bighorn
- 1972 F9 35
-
Quality aftermarket front wheel seal Replaces Kawasaki P/N: 654A254008 Applications:- 73-75 H1 500
- 76-78 KH400 A3-A5
- 1976 KH500 A8
- 77-80 KZ1000 A1-A4, A3A
- 77-80 KZ1000 B1-B4 LTD
- 78 & 80 KZ1000 D1, D3 (Z1R)
- 79-80 KZ1000 E1-E2 Shaft
- 78-79 KZ400 B1-B2
- 77-79 KZ650 B1-B3, B2A
- 77-79 KZ650 C1-C3 (Custom)
- 78-79 KZ650 D1-D2, D1A (SR)
- 1980 KZ650 E1 LTD
- 1980 KZ650 F1
- 76-79 KZ750 B1-B4
- 1980 KZ750 G1 (LTD II)
- 76-77 KZ900 A4-A5
- 1976 KZ900 B1 LTD
-
Highest quality reproduction Japanese made gas cap with keys. Sold as shown. Replaces Kawasaki P/N: 51048-1003 Superseded to P/N: 51048-1018 Applications:KZ250 D1-D2 KZ750 C1 KZ250 G1 KZ750 E1-E3 KZ250 L1 KZ750 F1 KZ250 W1 KZ750 H1-H4 KZ305 A1-A2 KZ750 K1 KZ305 B1 KZ750 M1 KZ400 H1 KZ1000 A1-A4, A3A (MKII) KZ440 A1-A3 KZ1000 J1-J2 KZ440 D1-D2, D4-D5 KZ1000 K1-K2 LTD KZ440 G1 79-80 KZ1000 E1-E2 (KZ1000 Shaft) (ST) KZ550 A1-A4 KZ1000 M1-M2 CSR KZ550 C1-C4 LTD KZ1100 A1-A3 KZ550 M1 KZ1100 L1 KZ650 H1-H3 -
Quality reproduction part by K&L Applications:- 85-87 ZX600 A1-A3 Ninja
- 86-87 EX250 E1-E2 Ninja
- 86-91 ZG1000 A1-A6 Concours (A4 Canada 1989)
- 86-87 ZX1000 A1-A2 Ninja
- 87-91 EX500 A1-A5
- 87-97 ZX600 B1, C1-C10 Ninja
- 87-90 ZX750 F1-F4 Ninja
- 88-89 EL250 B2-B3 Eliminator
- 1991 EL250 E1-E4 Eliminator
- 88-05 EX250 F2-F4, F6-F19 Ninja
- 06-07 EX250 F6F-F7F Ninja