- 1980 KZ1000G (Z1 Classic)
- KZ1000A (MKII)
- KZ1000B (LTD)
-
New Old Stock Genuine Kawasaki P/N: 25005-1067 Applications: -
Out of stock
Fork outer tubes have been brush polished. Set includes:- 44005-063 LH Outer Tube
- 44006-061 RH Outer Tube
- 44009-024 Fork Seals
- 44010-032 Dust Shields
- 220B0408A Screws
- 44045-002 Seals
- 76-77 KZ900A
- 76 KH500
- 77 KZ1000A
- 76 KZ900 LTD
- May fit others
-
Out of stock
Brush finish. Set of 2. Some have lower bracket as shown for fender brace, and some do not. Kawasaki uses the same part number for both versions. Consists of:- 1) 44005-1001 Left Hand Outer Tube
- 1) 44006-1001 Right Hand Outer Tube
- 2) 220B0408A Screws
- 2) 44045-002 Drain gaskets
- 2) 44049-024 Fork seals
- 2) 44010-032 Dust shields
- 2) 44043-044 Washers
- 2) 44044-012 Circlip
- 78 KZ1000A
- 77-80 KZ1000 LTD
- 80 KZ1000G, Z1 Classic
- 78-79 KZ750B
- 78-79 KZ650B
-
Out of stock
OEM Kawasaki P/N: 33001-046 Date code stamped 311. Has some minor pitting, as shown. Has been powder coated. Sold as shown. Applications:- 73-75 Z1 900
- 76-77 KZ900A
-
Front end fork assembly with wheel. We recently purchased a small warehouse of parts. This is in decent shape, front fender has some warping from storage. Front wheel is not bent. Tire looks okay. Not the original tire. Not a lot of miles on the front end. Front brakes are not working. Throttle housing still good. Has throttle lock. Sold as complete setup or will part out. Low cost shipping available upon request. Location: Gravestone Building -
Out of stock
Genuine Kawasaki Parts ~ Used Give your project a nice added touch! Triple clamp has been freshly powder coated & includes new bolts that we have manufactured here in the U.S. Semigloss Black Powder Coated. Sold as shown. Includes Kawasaki P/N: 44039-045 Upper Triple Clamp Kawasaki 46012-008 Top Clamps (qty 2) 44041-048 Triple Clamp Pinch Bolts (qty 2) 44041-038 Steering Stem Bolt (qty 1) 92020-007 Steering Stem Nut (qty 1) 410B0800 Washer (qty 1) 461F0800 Spring Washer (qty 7) 92007-002 Bolts (qty 4) Applications:- 73-75 Z1 900
-
Kawasaki Genuine Part ~ REBUILT Kawasaki P/N: 44039-048 Nice, ready-to-go fork bridge set, complete. Rebuilt with quality bolts and hardware made by Johnny's. Includes:- 44039-048 Upper stem
- 44037-053 Lower stem
- 92007-031 Bolt
- 92022-230 Washer
- 46012-010 Lower handlebar holder
- 46012-008 Upper handlebar holder
- 73-75 H1 500
-
This piece came from a vintage drag inventory we recently acquired. Not sure if it is from a 1979 or 80 model as the part numbers differ. Should fit either, but the tubes must be used with the lower legs. Possible low-cost shipping upon request, or local pick up if preferred. WILL SEPARATE. Sold as shown - no returns -
Out of stock
Legs are polished to a high gloss finish. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stock
Legs are polished to a natural brushed finish with clear coat. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stock
Legs are polished to a nice gloss finish. Consists of:- 2) 44013-032 New fork tubes
- 1) 44006-039 Right Hand Outer Tube
- 1) 44005-041 Left Hand Outer Tube
- 2) 44062-003 Polished Top bolt
- 2) 44009-014 New fork seal
- 1) 220B0408A Fork drain kit
- 2) 44010-018 Fork dust seals
- 72-75 H2 750
- 73-75 H1
- 72 H1B
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Frame # JKAZNBB14FB502477 Eng # KZT10AE024423 We are parting this bike out. It has a couple of issues; under the head by the cam cover has a small crack, as shown. The carbs are off of a KZ1000 J. Exhaust is different, not stock and has no baffle. Brakes in front not bad; rear brakes are locking up. No broken fins. We will separate. Bike has a title. Due to our Ohio weather, it has not been test ridden. New oil, filter, spark plugs. Will run as shown in video. Charging system does not work. Has a lot of good parts, or you can buy this and fix it up. Please call us if interested. 330-335-7365 -
Out of stock
Quality reproduction exhaust system P/N: OSVP059 Applications:- 73-75 Z1 900
- 76 KZ900
-
Manufactured by ANNY in Japan. Lightweight, made out of titanium. Each pipe weighs only 4 lbs. These are prototype pipes, that have been run for about 500 miles. They produce a very nice sound. Bottom left pipe has a very tiny ding, as shown. See video below as we demonstrate these pipes on a customer’s 76 KZ900. (Bike is not for sale.) These retail for $4,000. Applications: 73-80- Z1 900
- KZ900 LTD
- KZ1000 LTD