- 77-80 KZ 1000 A
- 77-80 KZ 1000 LTD
- 78-81 KZ 1000 C
- 78-80 KZ 1000 D Z1R
- 76-79 KZ 750 B
- 77-79 KZ 650
- Will fit others
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:
- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Out of stockGenuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 44045-049 This part is for the headlight mounting brackets to absorb vibration in order to prevent stress cracking and premature headlight failure. They fit below the brackets, over the fork upper tube. Some of the models listed use 4, some use 2. These are considered must have parts for proper headlight mounting. Sold as Shown. Applications:
- 1983 EX305 B1 (Gpz 305)
- 76-79 KE125 A3-A6
- 1974 KS125
- 1975 KS125 A
- 78-79 KZ200 A1-A2, A1A
-
Out of stockChrome with clamps and hardware. Harley P/N: 65702-68B Applications:
- 1958-1976 Independent Dual XLH, XLCH
- 1970-1976 Connected Dual XLH, XLCH
- 1980 XL, XLS
-
Out of stockSome shelf wear, as shown. We are not 100% sure on the part number but we believe it to be: Kawasaki P/N: 44034-069 Applications:
- 1974-1975 H1 500
- May also fit 1974-1975 H2 750
-
Out of stockSet of 2 Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23019-022 Applications below
-
Kawasaki P/N: 23019-023 Applications:
- 73-75 H1 500 D, E, F
- 1982 KZ250 L1 (CSR BELT)
- 1972 H2 750 Mach IV
- 1983 KZ250 W1 (LTD BELT)
- 74-75 H2 750 B, C Mach IV
- 81-82 KZ305 A1-A2 (CSR)
- 1976 KH250 A5
- 1982 KZ305 B1 (CSR BELT)
- 76-78 KH400 A3-A5
- 87-88 KZ305 B2-B3
- 1976 KH500 A8
- 81-83 KZ440 A2-A3,B2,D2-D5,G1
- 77-80 KZ1000 A1-A4, A2A, A3A
- 80-83 KZ550 C1 -C4,D1,H1-H2
- 77-80 KZ1000 B1-B4 LTD
- 77-79 KZ650 B1-B3, B2A
- 1978 KZ1000 C1, C1A Police
- 77-79 KZ650 C1-C3 Custom
- 79-80 KZ1000 E1-E2 Shaft
- 78-79 KZ650 D1-D2, D1A SR
- 1980 KZ1000 G1 Classic
- 1980 KZ650 E1 LTD
- 81-83 KZ1000 J1-J3
- 1980 KZ650 F1
- 81-82 KZ1000 K1-K2 (LTD)
- 81-83 KZ650 H1-H3 (CSR)
- 81-82 KZ1000 M1-M2 (CSR)
- 1984 KZ700 A1
- 82-83 KZ1000 R1-R2 Eddie Lawson Replica
- 76-82 KZ750 B1-B4,E1-E3,G1,H1-H3,L3,M1,N1-N2,R1
- 81-82 KZ1100 A1-A2 (SHAFT)
- 76-77 KZ900 A4-A5,B1
- 81-82 KZ1100 B1-B2 (GPz)
- 73-75 S1 A, B, C Mach I
- 1982 KZ1100 D1 (SPECTRE)
- 72-73 S2 A Mach II
- 79-82 KZ1300 A1-A4
- 74-75 S3 A Mach II
- 1980 KZ1300 B2
- 73-75 Z1 900 A, B
- 78-79 KZ200 A1-A2
- 83-84 ZX1100 A
- 80-81 KZ250 D1-D2
- 83-85 ZX650 A,E
-
Kit includes: Replaces Kawasaki P/N: 34006-002 Spring (2) - Quality American Made Replaces Kawasaki P/N: 92022-049 Washer (2) - Quality American Made Kawasaki P/N: 480J1600 Circlip (2) - Genuine NOS Kawasaki Our P/N: 34006-002 Applications:
- 1975-1979 KV75
- 1971-1985 MT1
- 1968-1971 G3SS
- 1971 G3TR
- 1970-1971 G31M
- 1967-1969 C2SS/C2TR
- 1971-1973 F6
- 1968-1970 F3
- 1971-1973 F7
- 1969-1970 F4
- 1971-1972 F8
- 1972 F81M
- 1972 S2 350
- 1969-1971 H1 500
- May fit others
-
Out of stockI.D. approximately 2 5/8" Fits most vintage 4 in 1 systems. Our P/N: 941M5