- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- Will fit others
-
Out of stock
Quality reproduction part. Replaces OEM P/N: 35022-072 Includes P/N 92075-176 license plate rubber Applications: -
Out of stock
Quality reproduction part. Replaces OEM P/N: 35003-015 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- Will fit others
-
Genuine Kawasaki ~ Used ~ Powder Coated ~ Semi-Gloss Kawasaki P/N's: 44037-098 Steering Stem (2) 92003-064 Bolt (2) 461F1200 Washer Applications:- 1976-1977 KZ900 A4-5
- 1976 KZ900 B1 LTD
- 1977-1978 KZ1000 A1-2
- 1977-1978 B1-2 LTD
-
Out of stock
OEM Kawasaki P/N: 53043-013-86 Very nice shape. Has marks on paint, as shown. Great part for an un-restored everyday rider. Applications:- 78 KZ1000 LTD
-
New Old Stock Genuine Kawasaki P/N: 23005-018-21 Superseded P/N: 23005-018-10 Small dent and scratch located on back, as shown, from storage. Applications:- 70 H1 500
- 72 H1 500 B
- A Series
- W Series
-
Out of stock
This is a quality reproduction seat. Replaces Kawasaki P/N: 53001-076 Will fit other models with proper seat catch, but the stay bar will be in a different position. Applications:- 73-75 Z1 900
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Out of stock
Freshly Powder Coated. Nice Genuine Parts. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Contains the following Kawasaki P/N's:- 34011-029 Stand OEM powder coated
- 34023-012 Spring
- 34019-014 Bolt
- 92016-044 Nut
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Out of stock
OEM Kawasaki P/N: 33001-091 It is stamped 607. It only has one bearing on each side. Has been powder coated and is in nice shape. Sold as shown. Applications:- 77 KZ1000A
-
Out of stock
The pan and foam are in great condition. Cover is brand new. Kawasaki P/N: 53001-106 Applications:- 74-75 KZ400
- Looks like it will fit 76-77, but not 100% sure. Please check first.
-
New Old Stock Genuine Harley P/N: 56094-62 Replaces Harley P/N: 56095-62 Most likely the part number listed above because it has a hole for steering damper. Applications:- 1962-1966 Sportster
-
No broken tabs. Needs a little work at the emblem area, as shown. Applications:- 76 KZ900 LTD
- 76-77 KZ900A
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 43001-1001 Applications:- 1977-78 KZ1000 B1, B2 LTD
-
Out of stock
Freshly powder coated Genuine Kawasaki P/N: 44037-082 Includes: 92003-064 Bolts (2) 461F 1200 Washer (2) Applications:- 74-75 H2 750
- May fit others
-
We removed this seat from a 1979 KZ750 B Nice Seat! Looks to have had a repair at one time Applications:- Should fit 76-79 KZ750
-
Out of stock
These NOS stands came from an older inventory. There was some small damage from poor shelf life, so they have been freshly powder coated. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Out of stock
Genuine Kawasaki, Used We see no dents. There are some scratches, as shown. The scratches could be polished out if desired. Comes with original bracket and bolts. Great for the unrestored rider. Very nice part and very hard to find! Kawasaki P/N's: 35022-038 Fender Superseded P/N: 35022-045 35025-009 Bracket (2) 112G0612 Bolts Applications:- 1969-1971 H1 500
- 1972 H1 500C
-
Out of stock
Some shelf wear, as shown. We are not 100% sure on the part number but we believe it to be: Kawasaki P/N: 44034-069 Applications:- 1974-1975 H1 500
- May also fit 1974-1975 H2 750
-
Nicely powder-coated battery box. Includes 92071-056 rubber grommet. Applications:- 76-77 KZ900A
- 76 KZ900 LTD
-
Out of stock
Quality powder coated center stand. Replaces Kawasaki P/N: 34011-1004KIT Kit consists of:- (1) 34011-1004 Main stand
- (1) 34023-012 Spring
- (2) 34019-014 Bolts
- (2) 92016-044 Nuts
- 73-75 Z1 900 (With 4-into-1 header)
- 77-78 KZ1000A (With 4-into-1 header)
- 78 Z1R
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 25005-1067 Applications:- 1980 KZ1000G (Z1 Classic)
- KZ1000A (MKII)
- KZ1000B (LTD)
-
Out of stock
Fork outer tubes have been brush polished. Set includes:- 44005-063 LH Outer Tube
- 44006-061 RH Outer Tube
- 44009-024 Fork Seals
- 44010-032 Dust Shields
- 220B0408A Screws
- 44045-002 Seals
- 76-77 KZ900A
- 76 KH500
- 77 KZ1000A
- 76 KZ900 LTD
- May fit others
-
Out of stock
Brush finish. Set of 2. Some have lower bracket as shown for fender brace, and some do not. Kawasaki uses the same part number for both versions. Consists of:- 1) 44005-1001 Left Hand Outer Tube
- 1) 44006-1001 Right Hand Outer Tube
- 2) 220B0408A Screws
- 2) 44045-002 Drain gaskets
- 2) 44049-024 Fork seals
- 2) 44010-032 Dust shields
- 2) 44043-044 Washers
- 2) 44044-012 Circlip
- 78 KZ1000A
- 77-80 KZ1000 LTD
- 80 KZ1000G, Z1 Classic
- 78-79 KZ750B
- 78-79 KZ650B
-
Out of stock
OEM Kawasaki P/N: 33001-046 Date code stamped 311. Has some minor pitting, as shown. Has been powder coated. Sold as shown. Applications:- 73-75 Z1 900
- 76-77 KZ900A
-
Front end fork assembly with wheel. We recently purchased a small warehouse of parts. This is in decent shape, front fender has some warping from storage. Front wheel is not bent. Tire looks okay. Not the original tire. Not a lot of miles on the front end. Front brakes are not working. Throttle housing still good. Has throttle lock. Sold as complete setup or will part out. Low cost shipping available upon request. Location: Gravestone Building -
Out of stock
Genuine Kawasaki Parts ~ Used Give your project a nice added touch! Triple clamp has been freshly powder coated & includes new bolts that we have manufactured here in the U.S. Semigloss Black Powder Coated. Sold as shown. Includes Kawasaki P/N: 44039-045 Upper Triple Clamp Kawasaki 46012-008 Top Clamps (qty 2) 44041-048 Triple Clamp Pinch Bolts (qty 2) 44041-038 Steering Stem Bolt (qty 1) 92020-007 Steering Stem Nut (qty 1) 410B0800 Washer (qty 1) 461F0800 Spring Washer (qty 7) 92007-002 Bolts (qty 4) Applications:- 73-75 Z1 900
-
Kawasaki Genuine Part ~ REBUILT Kawasaki P/N: 44039-048 Nice, ready-to-go fork bridge set, complete. Rebuilt with quality bolts and hardware made by Johnny's. Includes:- 44039-048 Upper stem
- 44037-053 Lower stem
- 92007-031 Bolt
- 92022-230 Washer
- 46012-010 Lower handlebar holder
- 46012-008 Upper handlebar holder
- 73-75 H1 500
-
This piece came from a vintage drag inventory we recently acquired. Not sure if it is from a 1979 or 80 model as the part numbers differ. Should fit either, but the tubes must be used with the lower legs. Possible low-cost shipping upon request, or local pick up if preferred. WILL SEPARATE. Sold as shown - no returns -
Out of stock
Legs are polished to a high gloss finish. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stock
Legs are polished to a natural brushed finish with clear coat. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stock
Legs are polished to a nice gloss finish. Consists of:- 2) 44013-032 New fork tubes
- 1) 44006-039 Right Hand Outer Tube
- 1) 44005-041 Left Hand Outer Tube
- 2) 44062-003 Polished Top bolt
- 2) 44009-014 New fork seal
- 1) 220B0408A Fork drain kit
- 2) 44010-018 Fork dust seals
- 72-75 H2 750
- 73-75 H1
- 72 H1B
-
Out of stock
Kerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Frame # JKAZNBB14FB502477 Eng # KZT10AE024423 We are parting this bike out. It has a couple of issues; under the head by the cam cover has a small crack, as shown. The carbs are off of a KZ1000 J. Exhaust is different, not stock and has no baffle. Brakes in front not bad; rear brakes are locking up. No broken fins. We will separate. Bike has a title. Due to our Ohio weather, it has not been test ridden. New oil, filter, spark plugs. Will run as shown in video. Charging system does not work. Has a lot of good parts, or you can buy this and fix it up. Please call us if interested. 330-335-7365 -
Out of stock
Quality reproduction exhaust system P/N: OSVP059 Applications:- 73-75 Z1 900
- 76 KZ900