- 81-83 KZ440 LTD
- 81-83 KZ440 LTD Belt
-
Out of stock
Kawasaki Genuine Part P/N: 35011-1090 Chrome is Nice Has some signs of wear but nice overall We have multiples of these in stock. Condition may vary, but all are nice. Applications: -
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 14032-1038 Applications:- 80-81 KZ440A LTD
- 80-81 KZ440B
- 80-81 KZ440D LTD BELT
-
New Old Stock P/N 35019-1149 Application:- 85-88 Kawasaki KLF 185 Bayou
-
Genuine Kawasaki P/N: 18024-038 Nice Used Bracket Application:- 77-78 KZ1000A
-
~ New Old Stock ~ Kawasaki P/N: 46044-005 Applications:- 72-73 H2 750
- 72 H1B 500
- 72 S2 350
- 72-73 F9 350
- 70-71 F5 350
- 72-74 MC1
- Many Others
-
Out of stock
Legs are polished to a high gloss finish. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stock
Fork outer tubes have been brush polished. Set includes:- 44005-063 LH Outer Tube
- 44006-061 RH Outer Tube
- 44009-024 Fork Seals
- 44010-032 Dust Shields
- 220B0408A Screws
- 44045-002 Seals
- 76-77 KZ900A
- 76 KH500
- 77 KZ1000A
- 76 KZ900 LTD
- May fit others
-
Long chain guard model Part # 47504-52A Extra hole on right side as shown Not 100% sure of application Sold as shown Application:- 52 - 53 Harley K-Model
-
New Aftermarket Replacement Lens Replaces Kawasaki P/N: 23026-010 Kawasaki Replacement Gasket P/N : 23028-008 Applications:- 69-71 H1 500 Mach
- A1 250 Twin
- A7 350 Twin
- W1 650
- W2 650
- 71-72 F6 125
- 71-72 F7 175
- 68-70 F3 175 Bushwacker
- 69-70 F4 Sidewinder
- 1971 F8 Bison
- 1970 F5 Bighorn
- 1972 F9 350
-
Chrome Metric Bolt, Made in the USA 10mm x 70mm 1.25 Thread These bolts were made for us by mistake. They were slightly too long for our uses. Priced to GO! -
Out of stock
New Reproduction Part Replaces Kawasaki P/N: 23006-038 -
New Old Stock Kawasaki P/N: 23028-018 Applications:- 73-75 Z1900
- 74-75 H2
- S3
- KH400
- KE100
- F11
- Will fit others
-
Out of stock
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41078-1012 Applications:- KZ650-E1
- KZ650-F1
- KZ750-G1
- KZ1000-A4 (1980)
- KZ1000-B4 (LTD) (1980)
- KZ1000-D3/Z1R (1980)
- KZ1000-G1 (Z1 Classic)
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 43001-064 Applications:- 1974 KZ400
- 1977-78 KZ400A
- 1975-77 KZ400D
- 1975-1977 KZ400S Special
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 42036-015 Sold as shown Applications:- 76-77 KZ900A
- 73-75 Z1900
- Z1 Police
- KZ900 Police
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 92027-1177 Sold as shown Applications:- 79-80 KZ1000 LTD
- 80 KZ1000G (Z1 Classic)
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 42032-071 Sold as shown Applications:- 77 - 80 KZ1000A
- 77 - 80 KZ1000 LTD
- 78 + 80 Z1R
- Early KZ1000 Police
-
Good quick fix for meters that have been dented, or flaking Our P/N: 58-12410 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- May fit others
-
Includes P/N 25012-023 Speedometer Cover 25012-024 Tachometer Cover Our P/N: 58-85100 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- KZ1000 77-78
- Z1 900 73-75
- May fit others
-
Kawasaki new old stock Kawasaki PN: 23050-002 Applications:- Z1 900 73-75
- H2 750 72-75
- KZ 900 LTD REAR
- KZ 1000A 77-78
- KZ 900A 76-77
- KZ 750B
- KZ 650
- Many others
-
Genuine Kawasaki Part Length 31mm Collars have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 92027-160 -
Quality Re-manufactured Part, Made in the U.S.A. Kawasaki P/N: 92003-071 Application:- 1972-75 H2 750 Mach IV
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 44045-049 This part is for the headlight mounting brackets to absorb vibration in order to prevent stress cracking and premature headlight failure. They fit below the brackets, over the fork upper tube. Some of the models listed use 4, some use 2. These are considered must have parts for proper headlight mounting. Sold as Shown. Applications:- 1983 EX305 B1 (Gpz 305)
- 76-79 KE125 A3-A6
- 1974 KS125
- 1975 KS125 A
- 78-79 KZ200 A1-A2, A1A
-
Harley P/N: 48310-30 Applications:- 1930-1935 45" Twins
- 1940-1952 45" Twins
- 1930-1934 Singles
- 1953-1957 Servi Cars
- 1952-1978 XL, XLH, K-Model
-
Headlamp Bracket Right Side Kawasaki Genuine Part ~ New Old Stock Has some scuffs as shown from storage Kawasaki P/N: 44034-040-21 Application:- 72-73 H2 750
-
Fits G3SS G3TR May fit others. Kawasaki P/N: 34002-024 -
Fits G4TRD KV100A May fit others Kawasaki P/N: 34002-048 -
Side Cover Emblem Nut Lock, 3mm Exact replica of original Kawasaki P/N: (2) 92018-005 Our P/N: (10036) Applications: See below -
NOS Kawasaki Kawasaki P/N: (4) 92012-003 Applications:- Z1 900
- KZ400, KZ440
- KZ550, KZ650,
- KZ750, KZ1000,
- KZ1100, KZ1300
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N 92077-014 Applications:- 66-67 W1 650
- 68-69 W1SS 650
- 68-69 W2SS Commander
- 69 W2TT Commander