-
New Old Stock Genuine Kawasaki P/N: 21013-030 Applications:- 71-72 F8 250cc
- 73-75 F11 250cc
-
New Old Stock Vesrah P/N: VG-424 We recommend using a NOS Cylinder Rubber Gasket P/N: 92055-062 Applications:- 1974-1975 Z1
- 1976-1977 KZ900A
-
Out of stock
This is a ready-to-go bolt-on kit, complete with Wiseco 1075 kit. Freshly-bored cylinder. No broken fins. This is the same setup we use on our restorations. Applications:- 76-77 KZ900
- 77-80 KZ1000
- 73-75 Z1 900
-
Genuine Kawasaki ~ Used Cases are in good shape except for a crack and missing pin, as shown. We took these off a 1977 and they have a good VIN. Location: Farm -
New Old Stock Genuine Kawasaki P/N: K14046-250 Set contains: 11004-032 Head gasket 11009-014 Base gasket 18067-011 Exhaust pipe holder gasket Applications:- F4
-
NOS Kawasaki Genuine Part Kawasaki P/N: K14046-228 Kit includes:- 1-11004-015 Cylinder head gasket
- 1-11009-009 Cylinder base gasket
- 1-11009-031 Cylinder base gasket (G3SSD)
- 1-18067-003 Exhaust gasket
- 1969 G3TR Bushmaster 90cc
- 1970 G3TR 90cc
- 1969-70 G3SS 90cc
- 1971 G3SSA 90cc
- 1972 G3SSB 90cc
- 1973 G3SSC 90cc
- 1974 G3SSD 90cc
-
New Old Stock* Genuine Kawasaki P/N: K14046-205 *as we have multiple quantities of this kit, the coloration of the copper gaskets will vary due to age Includes:- 11004-044 Gasket, Cylinder head 1
- 18067-017 Gasket, Exhaust pipe 1
- 11009-026 Gasket, Cylinder base 1
- 1971 F6 125
- 1972 F6 125 A
- 1973 F6 125 B
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: K14046-203 Includes Kawasaki P/N:- 1) 11004-037 Head gasket
- 1) 11009-024 Base gasket
- 1) 18050-004 Exhaust gasket
- 1970 F5 350 Bighorn
- 72-75 F9 350
-
New Old Stock Genuine Kawasaki P/N: K14046-109 Kit contains the following P/N's:- (3) 11004-047 Cylinder Head Gasket
- (3) 11009-027 Cylinder Base Gasket
- (6) 16062-015 Air Inlet Gasket
- (3) 18067-003 Exhaust Pipe Gasket
- (1) 92065-011 Oil Drain Plug Gasket
- (1) 92055-018 18mm ORing
- (1) 92055-035 Output Shaft ORing
- (1) 14045-012 L.H. Engine Cover Gasket
- (1) 14046-019 R.H. Engine Cover Gasket
- (1) 92055-025 Tach Gear ORing Bushing
- (1) 670B2020 20mm ORing
- (1) 14050-005 Point Cap Gasket
- (8) 92022-077 Oil Pump Washer
- (1) 16089-001 Oil Pump Cam Shaft V Ring
- (3) 16090-002 Oil Pump Shaft ORing
- (1) 16088-002 Oil Pump Upper Cap ORing
- (1) 16090-003 Oil Pump Lower Cap ORing
- (1) 16094-002 Oil Pump Gasket
- (3) 92065-023 Check Valve Gasket
- (3) 92065-058 Check Valve Gasket
- S1 and KH250
-
P/N: K1075 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:- 4 Cylinder sleeves
- 4 Pistons
- 4 Ring sets
- 4 Piston pins
- 8 Circlips
- Base gasket
- Head gasket
- Z1 900
- KZ1000
-
P/N: K1015 Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application. Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require. Kit Includes:- 4 Pistons
- 4 Ring sets
- 4 Piston pins
- 8 Circlips
- Base gasket
- Head gasket
- Z1 900
- KZ1000
-
Will work on Honda:- XL250R 85-87
- XR250R 85 95
- XR250L91-96
- XL250RF/RG 85-86
- XR250RF 85
-
Out of stock
Set of 4 float bowl gaskets for Mikuni Smooth Bore 29MM Carburetors. P/N: G-29MM Applications:- Z1 900
- KZ 1000
- Anything running a Mikuni Smooth Bore Carburetor
-
P/N: EK630-92 Superseded P/N: DID630-92 Applications:- This is the chain for Z1 900 and KZ 900 using stock gearing
