- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1976 KZ900B LTD
- 1977-1980 KZ1000A
- 1977-1980 KZ1000B LTD
- 1978 and 1980 KZ1000D Z1R
- 1978-1981 KZ1000C Police
- 1980 KZ1000G Zl Classic
-
Aftermarket Sprocket from Sunstar Replaces Kawasaki P/N: 13144-046 Applications: -
Made by Sunstar, P'N: 61116 Replaces Kawasaki P/N: 13144-1083 This 16-tooth sprocket is one more than the original. Applications:- 1983-84 ZX1100 A1 and A2
-
Made by Sunstar, P/N: 60617 Replaces Kawasaki P/N: 13144-1042 17-tooth sprocket. Applications:- 81-83 KZ1000J
- 81-82 KZ1000K LTD
- 81-82 KZ1000M CSR
- 82-2001 KZ1000P Police
- 82-83 KZ1000R Eddie Lawson Replica
- 81-82 KZ1100B GPZ
-
New Old Stock Kawasaki P/N: 14070-005 Applications:- 1974 KZ400
- 1977-1978 KZ400A
- 1975-1977 KZ400D
- 1975-1977 KZ400S Special
-
New Old Stock Genuine Kawasaki Kawasaki P/N's: (1) 21082-006 Points Replaces 310-9208 (1) 21013-012 Condenser Replaces 310-9209 Our P/N: 21082-006 KIT Applications:- B8
- B8S
- B8T
- F1
- F1TR
- F2
- F2TR
- F3
-
New Old Stock Genuine Kawasaki P/N: 13156-1070 Applications:- 1981-84 KLT200
- 1982-84 KLT250
-
New Old Stock Genuine Kawasaki P/N: 12046-004 Applications:- 77-79 KZ650B
- 77-79 KZ650C Custom
- 78-79 KZ650D SR
- 80 KZ650E, F
- 74 KZ400
- 75-77 KZ400D
- 77-78 KZ400A
- 75-77 KZ400S
-
New Old Stock Genuine Kawasaki P/N: 16115-017 Applications:- 69-75 H1 500
- 76 KH500
- 74-75 S3 400
- 76-78 KH400
- 72-73 S2 350
- 70-71 F5 350 Bighorn
- 72-75 F9 350
- 73-75 S1 250
- 76 KH250
- 71-72 F8 250
- 75 F11 250
-
New Old Stock Genuine Kawasaki P/N: 16115-1003 Applications:- 79-80 KZ1000E Shaft
- 79-82 KZ1300
- 81-83 KZ1100 Shaft
-
New Old Stock Genuine Kawasaki P/N: 12046-010 Superseded P/N: 12046-1007 Applications:- 1978-79 KZ200
- 78-81 KL250
- May fit others
-
All pages are nice, clear and legible; showing some discoloration due to age. Page edges are showing wear/dirt from use handling and storage. Cover/Binding are in place showing some wear/dirt from use, handling and storage. Print Date: June 1975 Kawasaki P/N: 99997-715 -
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41078-1013 The paint is not in perfect condition, please see photos. Not every part is in the exact same condition, some may look slightly different from picture. Applications:- 90-96 VULCAN 500
- 81-82 KZ1000M CSR
- 82-2005 KZ1000 POLICE
- 1983 KZ1100A
- 1983 KZ1100 SPECTRE
- 1983 KZ1100-L1 LTD SHAFT
- 1983 KZ440 LTD
- 1983 KZ440 LTD BELT
- 80-83 KZ550A
- 80-83 KZ550 LTD
- 1981 GPZ 550
- 1983 KZ550 SPECTRE
- 83-84 KZ550 SPECTRE LTD SHAFT
- 81-83 KZ650 CSR
- 80-82 KZ750E
- 80-83 KZ750 LTD
- 1983 KZ750 LTD BELT
- 1984 KZ750-K2 (CANADA ONLY)
- 1982 KZ750M1 CSR TWIN
- May fit others
-
New Old Stock Genuine Kawasaki P/N: 13102-002 Old Kawasaki P/N: 310-0530 Applications:- F1
- F1TR
- B8
- B8S
- B8T
-
New Old Stock Kawasaki P/N: 13102-003 Applications:- 1968-1970 F3 175
- 1968-1970 F4 250
- 1967-1969 C2SS and C2TR
-
New Old Stock Genuine Kawasaki P/N: 13118-011 Combine with the outer part #13102-019 to complete the assembly. Applications:- 76-79 KZ750B
- 80 KZ750G
- 79-80 KZ1000A
- 79-80 KZ1000B LTD
- 79-81 KZ1000C Police
- 78-80 KZ1000D Z1R
- 81 KZ1100B GPZ
-
Fits in the oil level tube on the oil tank. New Old Stock Genuine Kawasaki P/N: 52005-004 Applications:- 1969-72 H1 500cc
- A1, A1SS 250cc
- A7, A7SS 350cc
- F2, F2TR 175cc
-
New Old Stock Genuine Kawasaki P/N: 13001-2094 Applications:- 1986-89 JS550 A5
- A6
- A7
- A8
- 1990 JS550 B1
-
Made in USA by Cometic. This copper head gasket came to is in a vintage drag race inventory. It was marked 740cc. It does match up to an OEM #11004-1037 head gasket. Applications:- KZ650
-
.005 Made in USA by Cometic. Replaces P/N: C8098 Applications:- KZ900
- KZ1000
-
.010 Made in USA by Cometic. Cometic P/N: W5025 Replaces P/N: C8095 Applications:- KZ900
- KZ1000
-
New Old Stock Genuine Harley Davidson P/N: 25582-73 Application:- 73-84 Shovelhead
-
This seal has many different uses. New Old Stock Genuine Kawasaki P/N: 92050-065 Applications:- KZ750B
- KZ305
- KZ400
- KZ440
-
New Old Stock Genuine Kawasaki P/N: 21013-030 Applications:- 71-72 F8 250cc
- 73-75 F11 250cc
-
Out of stock
Complete Gasket Kit Includes the Following: 11004-048 (3) 11009-019 (3) 18067-008 (3) 16062-011 (6) 14046-014, 14045-012, 14050-005, 16094-002 Our P/N: VG-431 Applications:- 73-75 H1 500
- 76 KH500
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92022-076 Previous P/N: A10103629 Sold as a set of 4 (Some Applications Use 5 Washers) Applications:- 69-73 H1
- 72-73 H2
- 70-71 F5
- A1
- A1SS
- A7
- A7SS
- May fit others
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 16134-028 Applications:- 76-79 KD 175
- 76-78 KE 175
-
New Old Stock Genuine Kawasaki P/N: 52014-1052 Applications:- 84-85 KX80
-
New Old Stock Genuine Kawasaki P/N: 92057-4012 520 X 90 Drive Chain Application :- 1984 KXT250 Tecate
-
Quality Made in Japan Our P/N: VG-4079M Applications:- 01-03 KX85
- May fit others
-
New Old Stock Genuine Kawasaki P/N: 16115-024 Applications:- 74-76 KX125
- 74-76 KX250
- 78-79 KX250
-
2-cycle rings Many applications Wiseco P/N: 3189TD 81.00 mm -
Out of stock
NOS Kawasaki P/N: 54012-061 A little rusted from storage, as shown. Application:- 70-71 G4TR
-
Out of stock
Kawasaki P/N: 12049-1003, replaces 12047-003 Applications:- 73-75 Z1
- 78 Z1R
- Early KZ1000 Police
- 77-78 KZ1000 LTD
- 77-78 KZ1000
- 76-77 KZ900 A
- 76 KZ900 LTD
- Early KZ650
-
New Old Stock Genuine Kawasaki P/N: 13135-017 Applications:- 76 KH250
- 73-75 S1
- 72-73 S2
- 74-75 S3
- 76-78 KH400
-
New Old Stock Genuine Kawasaki P/N: 13131-034 Applications:- 76 KH250
- 73-75 S1
- 72-73 S2
- 74-75 S3
- 76-78 KH400
-
New Old Stock Genuine Kawasaki P/N: 92045-1027 Applications:- 79-81 KX 400
- KX 420
- KX 500
-
LEFT OR RIGHT SIDE CRANK SEAL AND HOLDER ~ New Old Stock ~ Left or right side crank seal and holder Kawasaki P/N: 14020-009 and 653B243508 Applications:- 71-75 MT1
- 76-80 KV75
-
New Old Stock Kawasaki P/N: Cover 14032-112-2H Gasket: 14046-034 Applications:- 1976-1979 KZ750B
- 1980 KZ750G LTD
- 1982 KZ750 CSR
- 1983 KZ750 K1 Belt
-
New Old Stock Genuine Kawasaki P/N: 12049-1005 Applications:- 79-80 KZ650
- 79-81 KZ1000C Police
- 79-80 KZ1000A, KZ1000B LTD
- 80 KZ1000D Z1R
- 79-80 KZ1000E
- 80 KZ1000G Z1 Classic
-
Aftermarket Harley 2nd Gear Counter Shaft 21 Teeth Replaces P/N: 35751-36 Vendor P/N: 17-0782 Applications:- 36-85 FL, FX
-
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 12055-002 Applications:- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 78+80 Z1R
- 79-80 KZ1000E
- 80 KZ1000G Z1 Classic
- 75-81 KzZ1000 Police
-
Quality replacement part Replaces OEM P/N: 25581-70 .005 oversize. Made in U.S.A. Applications:- 1970-1999 Big Twin
-
Quality reproduction Harley gasket kit. Applications:- Late 79-85 1000cc XLH
- XLCH
- (4) 1100 Tappet guide o-ring
- (12) 11101 Rocker cover o-ring
- (4) 11132 Pushrod cover o-ring
- (4) 11157 Pushrod o-ring
- (2) 16769-73 Copper head gasket
- (2) 16774-72 Cylinder base gasket
- (2) 17536-70 Rocker cover gasket
- (12) 17955-36 Small cork washer
- (1) 27023-71 Manifold gasket
- (2) 27062-78 Manifold seal
- (1) 29058-77 Air cleaner to carb gasket
- (4) 63529-57 Rubber seal
-
New Old Stock 2nd gear drive shaft, not all in original box. Kawasaki P/N: 13130-032 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 78 + 80 Z1R KZ1000G
- and more
-
Out of stock
This part is NOS. We had it powder coated and never used it. Finish is not perfect. Great for an every day rider. Genuine Kawasaki P/N: 14030-003 Superseded P/N: 14030-063 Applications:- F2
- F2TR
- F3
- F21M
-
ONE YEAR WARRANTY American Made Bolt Kit Kit consists of:- (13) 110B0625
- (3) 110B0635
- (1) 110B0650
- 1973-1975 Z1
- 1977-1980 KZ1000
- 1976-1977 KZ900A
- May fit Others
-
3 separate gaskets. Copper gaskets are .010 thick, with cylinder sleeve holes measuring 3.5". The mylar gasket has 3.25" holes. These may not go together. All 3 gaskets sold as a single item. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
-
New Old Stock Genuine Kawasaki P/N: 13161-1008 Applications:- 1977-1979 KE250 B1, B2, B3