-
Genuine Honda P/N: 16016-287-610 -
Call with needs! 44,670 Miles on the odometer 10 speed, shaft drive. Many parts are not genuine. We purchased this bike because we needed parts off if it for another project. Motor is stuck. Dual-range transmission. Wheels are okay, tank is fair. Has some decent parts on it. One of the fork tubes has been goofed. Exhaust has been repaired. Carbs are not complete, missing the top. Tank needs attention, could be cleaned. Seat is goofed, as shown. Sitting as is, it needs a lot of work. THE TANK HAS BEEN SOLD 10/22 -
Hypoid Gear Oil SAE 80W90 For Honda Goldwing and other shaft-driven motorcycles and ATVs. No overseas shipping on lubricants. Shipping to the 48 contiguous states only. -
We purchased an older distributor's inventory, and these came with it. They appear to be very high quality locks. This rim lock is compatible for a 3.25-3.50 rim size. Uses...cafe racer, vintage drag race, vintage road race. Will be a great part for vintage motorcross front wheels. Reference Kawasaki P/N / Our P/N: 41025-053 Applications:
...and many othersHonda Kawasaki Yamaha CRF70 KX60 YZ250 XR70 F7 XR80 A1 Scrambler A7 Elsinore KX250 -
Quality Japanese Made Parts Replaces Honda P/N: 30203-300-005 Superseded by P/N: 30203-323-005 Our P/N: 616-009 Applications:- 75-77 CB400F
- 72-73 CB500 K1-K2
- 76-78 CB550K
- 76-77 CB550F
- 76-78 CB750K
- 76-78 CB750F
- 76-78 CB750A
-
This rim lock is compatible for a 2.50-3.oo" rim size. Uses...cafe racer, vintage drag race, vintage road race. Kawasaki P/N: 41025-053 Applications:- F81M
- F9
- many others
-
Quality Japanese made condenser Made by Koyo (Okamoto Electric Co) Quantity of 2 required per bike. Sold each. Replaces Honda P/N: 30250-333-004 Our P/N: 617-007 Applications:- 73-74 CB350F, F1 (4-cylinder)
- 75-77 CB400F (4-cylinder)
-
Sold as set of four plugs Honda P/N: 98069-55916 -
Quality Made in Japan ENERJET P/N: 6N2-2A-4 6 Volt Battery L: 70mm W: 46mm H: 95mm Does not include acid. 60 day warranty in lower 48 states. Applications: Honda- XL100 79
- XL110 83
- XL125 79-84
- XL185 79-83
- XL250 78-81
- XL500 79-81
- May fit others
-
Quality Made in Japan ENERJET P/N: 6N2-2A-1 6 Volt Battery L: 70mm W: 46mm H: 95mm Does not include acid. 60 day warranty in lower 48 states. Application:- Honda CA110/S65
- May fit others
-
Quality Made in Japan ENERJET P/N: 6N2-2A-1 6 Volt Battery Does not include acid. 60 day warranty in lower 48 states. L: 70mm W: 46mm H: 95mm Application:- Honda CA110/S65
- May fit others
-
Custom chrome pike nut. 6mm thread Part Number: 7510-1 Application:- Honda CB750
- Honda CB550
-
This is a quality Japanese Battery Equivalent to Yuasa P/N: YB3L-A Enerjet P/N: FB3L-A Does not come with acid. 90 day warranty in lower 48 states. L: 98mm W: 56mm H: 110mm Applications:- 1982 Honda XL500S 84
- 85 Honda XL350R
-
We use S100 cleaner for all of our restorations. Safe for all cycle surfaces - paint, chrome, alloy, plastic, rubber, bearings, o-rings, etc. Non-acid, PH controlled and contains corrosion inhibitors. Biodegradable. See link for product demo. No overseas shipping. Shipping to the 48 contiguous states only. -
Quality reproduction NOS sprockets, made by Sunstar P/N: 51515 Replaces Honda P/N: 23801-KE7-600 15 Tooth Applications:- VF500C MAGNA
- VF500F INTERCEPTOR
-
Quality Japanese made condenser Made by Koyo (Okamoto Electric Co) Replaces Honda P/N: 30280-292-670 Superseded by: 30280-292-671, 30280-292-672, 30280-371-000 Our P/N: 617-020 Applications:- 68-73 CB350 K1-K4
- 1973 CB350 G
- 68-73 CL350 K1-K5
- 69-73 SL350 K1-K2
- 69-74 CB450 all
- 68-74 CL450 K1-K6
- 75-76 CB500T
- 75-77 GL1000
-
Out of stock
Will replace the following part #s 69-74 CB750:- 33400-341-702
- 33450-341-702
- 33650-300-000
- 33610-300-000
- Will fit others
-
New Old Stock Genuine Honda P/N: 14510-413-000 Applications:- 78-81 CB400
- 79-81 CM400
- 82-86 CB450
- 82-83 CM450
-
Honda P/N: 31GS7730 Condition: Used Pages are bright, crisp, and clear. Nice shape! Contains important operating information about your 2001 SA50P! The cover is slightly faded from age. Pages: 188 Models Covered:- 2001 SA50P Elite S
-
A nice addition for a garage, shop or den. For the manual of your favorite motorcycle. These are used and 25-35 years old. Sold as shown -
This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repairs. MANUAL P/N: 61GC402 CONDITION: USED SEE PICTURES All pages nice, clear, and legible; edges show some wear/dirt from use/handling/storage. Cover/binding in place showing some wear/dirt from use/handling/storage. Pages: 141 Print Date: 1984 CHAPTERS:- General Information
- Lubrication
- Maintenance
- Fuel System
- Engine Removal/Installation
- Cylinder Head/Cylinder/Piston
- ATAC
- Clutch/Kickstart/Shift Linkage
- Crankcase/Transmission/Crankshaft
- Cooling System
- Front Wheel/Brake/Suspension/Steering
- Rear Wheel/Brake/Suspension
- Subframe/Expansion Chamber
- Ignition System
- Troubleshooting
- 1985 CR80R
-
Honda P/N: 31GCF660 Condition: Used Pages are bright, crisp, and clear. Nice shape! Contains important operating information about your 2003 XR70R! The cover is slightly faded from age. There is writing in marker on the front cover. Contents page has rip at top, as shown. Pages: 161 Models Covered:- 2003 XR70R
-
Honda P/N: 31GEL630 Condition: Used Pages are bright, crisp, and clear. Nice shape! Contains important operating information about your 2002 XR50R! Pages: 165 Models Covered:- 2003 XR50R
-
OEM Style Quality reproduction parts for restoration purposes! Complete with crimping tool, as well as terminal kit. Suitable for most vintage and current Japanese motorcycles with the exception of early Honda. This is THE correct kit for restoring your wiring harness properly. The crimping tool has the ability to cut small screws, such as 2.6, 3, 3.5, 4, and 5m. The wire stripper will accommodate 0.75, 1.0, 1.5, 2.5, 4.0, and 6.0 gauge wire. Crimps 1.5, 2.5, and 6 gauge wire. -
Service - Repair - Maintenance Clymer Manuals are user-friendly and written in an easy-to-follow format that includes the following features: Two-column layout with large print. Step-by-step instructions. Thumb-tabbed chapters for quick access. Detailed exploded views and photos. Numbered table of contents and extensive index. Bold figure number to quickly match instructions with illustrations and photos. Clymer Manual: M437 Condition: New, still in wrapper Models Covered- 1997-2001 CR250R
-
Will work on Honda:- XL250R 85-87
- XR250R 85 95
- XR250L91-96
- XL250RF/RG 85-86
- XR250RF 85
-
This Shop Manual details the proper servicing and repairing procedures for mechanics working on the Honda 500, Model CB500. Carefully reading the complete section before beginning the work and following the steps in order given will result in better maintenance and repair with less trouble and time consumed. Always keep the recommended special tools at the work bench when performing repairs. Use only genuine HONDA replacement parts. Service data for individual parts is consolidated into a single section at the rear of the text, for quick reference. The descriptions and specifications in this manual are those in effect at the time this manual was approved for printing. Shop Manual: A 1000610 Printed in Japan by Honda Motor Co., LTD. Condition: Rough. Back cover is off. Pages are dog-eared and there are some stains in the front of the book. Models Covered- 1971 Honda CB500
-
New Old Stock Genuine Honda P/N: 14500-413-000 Applications:- 78-81 CB400
- 79-81 CM400
-
New Old Stock Genuine Honda P/N: 30202-122-004 Applications:- 78-80 PA50 Mopeds
-
New, made by Maier U.S.A. P/N: 205800L Applications:- 1971-73 CB500 Four
- 1974-76 CB550K
-
Honda P/N: 61G405 Condition: Used All pages clear/legible with some fingerprints and smudges but they do not interfere with the information. Pages and cover have some discoloration due to age and storage. Binding in place and the cover is attached. Pages: 228 Print Date: September 1987 Models Covered:- 1985-1988 CR80R
-
Honda P/N: 61GC404 Condition: Used Pages clean/clear with slight discoloration due to age and shelf life. Cover shows some wrinkles/dirt due to due to shelf life. Binding is intact and cover is attached. Pages: 240 Print Date: September 1986 Models Covered:- 1985-1987 CR80R
